- Victory Motorcycle Parts
 - Victory Motorcycle Parts
 - Victory Motorcycle Parts
Select Qty
Item #TRK-08-RD
Mfg # TRK-08-RD
MSRP$44.99
Retail$44.99
Head Hunter$43.19 (Save $1.80)
7 In Stock
Features
  • Exceeds the stock wire specs
  • No modifications needed to install
  • Sets your bike apart from the others!
  • Comes in a Set of 2 Wires
  • Product Details
  • Fitment
  • Shipping Info
  • Disclaimer
  • Compliment or contrast your paint scheme with some color! These wires are made with high quality Taylor 8mm coated, silicone spiral core ignition wire.
    They have smaller diameter spark plug boots to make it easier to grasp when removing the plug from down in the head.

    They are designed to be the perfect length to show them off without the need to tie them to your frame.
    They can be used with or without triangular chrome side covers for coil and ignition (cheese wedges)

    Frequently Asked Questions:


    Will the wires make more power?

    You probably won't notice it unless you have had engine work done or if you put your bike on a dyno. Only then will the benefits of the 8mm Taylor wires be noticed. They are more for looks, put they do perform better than the stock wires.


    Do I need to modify anything to get them to fit?

    These are direct replacements and these actually fit better than stock as the plug boots are smaller and easier to remove. The old wires were zip tied to the frame where these ones do not need to be. You want these to hang down some to be seen. TrikWires are made to specific lengths to ensure a nice fit. Some people have made small clearance notches in the back side of thier chrome triangular "cheese wedge" covers. This is not needed but some wanted to do this. You can run your bike without the cheese wedges for an even better look if so desired...


    What bikes will they fit?

    These wires will fit 2002 and newer Victory bikes with the newer style "Freedom" engine. All models are included except the older engined bikes. I have tried to make wires for the older 99-02 Victory bikes with the "Hammer" engine with no luck. It seems Victory used a few different coil connector types and the boot into the top of the head is very expensive. I will not be making any of these wires for the older bikes. Additionally I make Victory Vision wires too, but these may take slightly longer due to different coil boots and connectors.


    How do I take care of the wires?

    The solid colored wires are made of high temp silicone and only need a wipe. I heat shrink my braided wires with a new crystal clear heat shrink that will not haze. I would recommend wiping the wires off if any fuel or oil gets on them to keep them looking thier best, but they will resist most chemicals and heat.

  • Boardwalk
    2013-2015
    Cross Country Tour
    2013-2017
    Cross Country, Cross Country 8 Ball
    2010-2017
    Cross Roads, Cross Roads Classic, Cross Roads 8 Ball
    2010-2014
    Gunner
    2015-2017
    Hammer, Hammer S, Hammer 8 Ball
    2008-2017
    Hardball
    2012-2013
    Highball
    2012-2017
    Jackpot, Jackpot Ness
    2008-2016
    Judge
    2013-2017
    Kingpin, Kingpin Tour, Kingpin 8, Ball Kingpin Low
    2008-2012
    Magnum
    2015-2017
    Vegas, Vegas 8 Ball, Vegas Low, Vegas Ness
    2008-2017
    Vision, Vision Street, Vision Ness, Vision Tour, Vision Premium
    2008-2017
    X1
    2015-2017

    FITMENT DISCLOSURE

    This fitment information is provided to you based on the manufacturer's information. Consult manufacturer publication(s) and/or website(s) for specific fitment and other important application information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the information provided.

    GENERAL SAFETY WARNING

    Failure to follow manufacturer's recommendations and requirements can cause product failure resulting in serious injury or death. While effort has been taken in collecting accurate fitment information, Witchdoctors Billet Specialties LLC accepts no liability for loss or damage resulting from errors or omissions. If you believe any of the information provided is erroneous, please email: Fitment@buywitchdoctors.com

  • Shipping

    Qualifying Retail orders $99.99 and over will receive Fast Free shipping. Click Here for FREE Shipping Terms and Conditions.

    Qualifying Head Hunter Member orders $49.99 and over will receive Fast Free shipping. Click Here for Head Hunter Member Terms and Conditions.

    Please see International Shipping page for orders shipping outside the US.

    See our full Shipping Policy page for further details.

    Our website shows real-time availability for each item. Most items will ship the same business day an order is placed, however if an item requires additional processing time a message will be shown indicating the additional time required.

    Returns

    If your order arrives and it is not right, we will we'll fix it. We promise!

    Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 business days of delivery receipt of your item. We will issue a refund to your original payment method.

    See our full Return Policy for all of the pertinent details.

  • There are NO RETURNS on Special Order Items, Used Parts, Tools, Paint, Closeout Items, or Electrical Items of any type.
Merchant Services
Positive SSL on a transparent background
Witchdoctors Billet Specialties LLC.   
330-856-6924 M-F 9-5 EST
2164 Elm Rd NE, Warren, Ohio 44483 USA    

© 2014 - Witch Doctors | Privacy Policy | Terms of Sale | Log In