Dyna Beads Applicator Bottle

First start by cutting the top of the bag.
Next carefully pour the beads into the applicator bottle.
Cut the end off the cap and install onto the applicator.
Remove valve core and let the air out of the tire.
Thread the plastic hose onto the valve stem all the way down.
Attach the bottle to the hose.
Now the important part:
Slowly tip the bottle up until you get a slow, steady stream, don't rush it. If you try to rush things, it will jam up. If it does, lower the bottle and tap on the valve stem until it clears, then start slowly again.
There is a way to eliminate the jamming and speed things up by using a vibrating tool.
Speed things up with vibration!
The best tool we've come across is an engraving tool.
Place the engraver tool against the plastic tube to vibrate beads. Don't rush it. Let the vibrations work the beads down into the tire.
When beads are all in the tire, install the valve core and inflate to proper pressure.