Chris Motorcycle Parts

Being seen and heard is half of riding safe. Chris Products makes the simple, dependable parts that do exactly that: DOT-approved reflectors, license plate reflectors and loud 12V chrome horns that keep your bike visible, audible and road legal.

At Witchdoctors, we stock Chris Products motorcycle parts for Victory, Indian and Harley-Davidson riders, metric cruisers, custom builds and street-legal UTVs. They're affordable, easy to install and made to replace worn or missing factory parts without fuss.

Why Riders Choose Chris Products

Chris Products is a long-standing name in motorcycle lighting and electrical accessories. Its parts are built to match factory-style specs, so they bolt on cleanly and look right on stock and custom bikes alike.

• DOT-approved reflectors: built to meet federal visibility requirements for street use.
• Made in the U.S.A.: the reflectors are manufactured in the United States.
• Simple installation: 5mm stud or adhesive mounting, and two-terminal horn wiring.
• Classic chrome style: finishes that suit cruisers, baggers and custom builds.
• Budget-friendly: inexpensive safety parts you can replace without a big bill.

Chris Products Parts Compared

Each part solves a different visibility or safety need. Use this chart to see where each one goes and what it does.

DOT-Approved Stud-Mount Reflectors

These 2½" round reflectors bounce headlight beams back to drivers, making your bike visible at night even when it's parked or your lights are off. They're one of the easiest ways to restore a missing factory reflector or add visibility to a custom build.

• 2½" round, DOT-approved lens
• 5mm stud mount or adhesive backing
• Red for the rear, amber for the front sides
• Made in the U.S.A. and sold individually

Shop this part: Red Stud-Mount Reflector · Amber Stud-Mount Reflector

License Plate Reflectors

Plastic reflectors designed for license plate frames add extra rear visibility right where following drivers look. A four-pack makes it easy to dress up the plate area on any bike.

• Red reflectors for rear visibility
• Made in the U.S.A.
• Four reflectors per pack

Shop this part: Red License Plate Reflectors (4-Pack)

12V Chrome Horns

Factory horns are often weak, and a dead horn can fail inspection. This 12V horn is a loud, deep-toned, round chrome horn with a two-terminal design and central mounting bracket for straightforward installation.

• Loud, deep tone that cuts through traffic noise
• Two-terminal 12V design
• Chrome finish to match classic hardware
• Central mounting bracket with two attachment holes

Shop this part: 12V Chrome Horn

Featured Chris Products Safety Parts

Our most popular picks from the lineup. Tap any item to check pricing and stock.

Where Motorcycle Reflectors Go

Reflector color depends on placement. Federal lighting standards generally call for:

• Red reflectors at the rear of the bike and on the rear sides.
• Amber reflectors on the front sides, usually on the fork legs or front fender.

Requirements can vary by state and vehicle type, so check your local rules, especially when making a UTV street legal.

How to Install Chris Products Reflectors and Horns

Reflectors

1. Pick a clean, flat spot facing the right direction (rear or side).
2. For stud mount, drill or use an existing hole and secure with the 5mm stud nut.
3. For adhesive mount, clean the surface with alcohol, then press firmly in place.
4. Check that the reflector sits square so it catches headlights from behind or beside you.

12V Horn

1. Disconnect the battery before working on wiring.
2. Mount the horn to the factory horn location, engine guard or frame using the center bracket.
3. Connect the two terminals to the horn wire and ground (or to a relay if your setup uses one).
4. Reconnect the battery and test the horn before riding.

Who Uses Chris Products?

• Victory and Indian riders: replacing missing or damaged reflectors and upgrading weak horns.
• Harley-Davidson and metric cruiser owners: factory-style chrome replacements.
• Custom builders: compact, DOT-approved reflectors that keep choppers and bobbers street legal.
• UTV owners: adding reflectors and a horn as part of a street-legal kit.
• Shops and service techs: affordable, dependable replacement parts.

Complete Your Safety Setup

Round out your build with more from Witchdoctors: browse headlights, turn signals and tail lights, license plate frames and mounts, motorcycle mirrors and grips and throttle locks.

Chris Products FAQs

Are Chris Products reflectors DOT approved?

Yes. Chris Products 2.5 inch round stud-mount reflectors are DOT approved for street use.

Where are Chris Products reflectors made?

Chris Products stud-mount reflectors and license plate reflectors are made in the U.S.A.

What color reflector do I need on my motorcycle?

Red reflectors go on the rear and rear sides of the bike. Amber reflectors go on the front sides, usually on the forks or front fender. Check your state rules for specifics.

How do I mount a stud-mount reflector?

Chris Products reflectors use a 5mm stud that passes through a hole and secures with a nut. They can also be mounted with adhesive on a clean, flat surface.

Will this 12V horn fit my bike?

The horn uses a universal center mounting bracket and a two-terminal 12V design, so it fits many motorcycles and UTVs. Check the Fitments tab on the product page to confirm your year, make and model.

Is a louder horn worth it?

Yes. Many factory horns are quiet and easy to miss in traffic. A louder, deeper horn helps drivers notice you, and many states require a working horn to pass inspection.

Do reflectors help if I already have lights?

Yes. Reflectors work even when your lights are off or out, such as when your bike is parked on a road shoulder at night.

Are the reflectors sold individually?

The stud-mount reflectors are sold individually. The license plate reflectors come in a pack of four.

Shop Chris Products Today

Get seen, get heard and stay street legal. Browse our full selection of Chris Products motorcycle reflectors, license plate reflectors and 12V chrome horns above, and order today. Questions about fitment? Our parts team is ready to help.