Genuine CFMoto Air Filter Seal — OEM Part #0GR0-110006
Breathe easy with a genuine CFMoto Air Filter Seal. Designed for the CForce models, it fits the original airbox, ducts and clamps for a tight seal and the airflow your engine was tuned for.
The intake path, from snorkel to airbox to throttle body, has to stay sealed. One cracked boot or warped lid can let in enough dust to wear out an engine fast. This part is confirmed for 5 CFMoto models from 2015 to 2025. See the full fitment list below.
Air Filter Seal at a Glance
-
OEM part number: 0GR0-110006
-
Brand: CFMOTO (genuine factory part)
-
Part type: Airbox Components
-
Fits: CForce ATV models, 2015–2025
-
Condition: New
CFMoto Models and Years This Air Filter Seal Fits
Genuine CFMoto part #0GR0-110006 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto CForce ATV Fitment
| Model |
Model Years |
| CFMoto CForce 400 |
2016–2022 |
| CFMoto CForce 500 HO |
2015–2018 |
| CFMoto CForce 500 S |
2017–2022 |
| CFMoto CForce 600 |
2019–2025 |
| CFMoto CForce 600 Touring |
2020–2025 |
Why Choose a Genuine CFMoto OEM Air Filter Seal?
- Factory seal against dust, water and debris
- Correct airflow for the factory fuel and ignition mapping
- Direct fit with original clamps, ducts and mounts
- Helps prevent premature engine wear
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM intake part, part #0GR0-110006
- Molded to original airbox and duct dimensions
- Heat- and fuel-vapor-resistant materials
- Designed for dusty, muddy and wet riding
- Works with factory air filters and sensors
Materials and Construction
CFMoto intake parts use rigid, heat-stable plastics for airbox housings and lids, flexible rubber or TPE boots and ducts that seal against vibration, and filter media designed to trap fine dust while maintaining airflow.
Common Reasons Riders Replace This Part
- Replacing a cracked airbox, lid or intake boot
- Restoring the seal after water or mud intrusion
- Routine replacement of filters and wear items
- Fixing idle and performance problems from an air leak
Signs Your Air Filter Seal Needs Replacing
- Dust or dirt on the clean side of the air filter
- Cracks or splits in boots, ducts or the airbox
- Rough idle, hesitation or a lean condition
- Whistling or sucking noises from the intake
- Water in the airbox after a crossing
Installation Tips
- Check the CFMoto parts diagram for clamps, seals and duct routing.
- Remove the old part and clean any dust from the airbox and throttle body inlet.
- Install the new part, making sure every edge seals fully.
- Tighten clamps evenly. Do not overtighten plastic fittings.
- Start the engine and check for air leaks and a smooth idle.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #0GR0-110006 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Air Filter Seal and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Air Filter Seal with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Air Filter Seal?
The genuine CFMoto part number is 0GR0-110006. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #0GR0-110006 fit?
It fits the CForce 400 (2016–2022); CForce 500 HO (2015–2018); CForce 500 S (2017–2022); CForce 600 (2019–2025); CForce 600 Touring (2020–2025).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
How often should I check my air filter?
Check it often, after every dusty ride if possible. Replace it at the interval in your CFMoto manual, or sooner in harsh conditions.
Can an intake leak damage my engine?
Yes. Unfiltered air carries fine dust that wears pistons, rings and cylinders quickly. Fix intake leaks right away.
Will this change my machine's performance?
It restores factory airflow and sealing. If you had a leak, you may notice a smoother idle and better throttle response.
Order Your Genuine CFMoto Air Filter Seal Today
Ride with confidence on parts built for your machine. Order the genuine CFMoto Air Filter Seal, OEM part #0GR0-110006, from Witchdoctors today and keep your CForce models running the way CFMoto designed it.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.