Genuine Yamaha Ball Joint Set — OEM Part #BG4-2530T-01-00
Worn suspension parts turn a smooth ride into a punishing one and make handling unpredictable. The genuine Yamaha Ball Joint Set restores the factory geometry, travel and ride quality of your Wolverine X2 or Wolverine X4.
A-arms, trailing arms, swingarms, shocks, springs, stabilizers, knuckles and bushings control wheel movement and alignment. Bent or worn parts cause wandering, uneven tire wear and harsh handling. This part is confirmed for 31 Yamaha models from 2018 to 2026. See the full fitment list below.
Ball Joint Set at a Glance
-
OEM part number: BG4-2530T-01-00
-
Brand: Yamaha (genuine factory part)
-
Part type: OEM Ball Joint
-
Fits: Wolverine recreation side-by-side models, 2018–2026
-
Condition: New
Yamaha Models and Years This Ball Joint Set Fits
Genuine Yamaha part #BG4-2530T-01-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Wolverine recreation side-by-side Fitment
| Model |
Model Years |
| Yamaha Wolverine X2 |
2019–2020 |
| Yamaha Wolverine X2 850 |
2021–2022 |
| Yamaha Wolverine X2 850 R-Spec |
2019–2023 |
| Yamaha Wolverine X2 850 XT |
2026 |
| Yamaha Wolverine X2 850 XT-R |
2020, 2022–2023 |
| Yamaha Wolverine X2 EPS |
2020–2021 |
| Yamaha Wolverine X2 EPS Hun |
2021–2022 |
| Yamaha Wolverine X2 EPS Hunter |
2021–2022 |
| Yamaha Wolverine X2 EPS R S |
2022 |
| Yamaha Wolverine X2 EPS SE |
2021 |
| Yamaha Wolverine X2 EPS XT-R |
2022 |
| Yamaha Wolverine X2 EPS XTR |
2022 |
| Yamaha Wolverine X2 R |
2019–2020 |
| Yamaha Wolverine X2 R-Spec |
2019–2020, 2023–2024 |
| Yamaha Wolverine X2 XT-R |
2020, 2023–2025 |
| Yamaha Wolverine X2 XTR |
2020, 2023 |
| Yamaha Wolverine X4 |
2018–2020 |
| Yamaha Wolverine X4 850 |
2021 |
| Yamaha Wolverine X4 850 R-Spec |
2022–2023 |
| Yamaha Wolverine X4 850 XT |
2026 |
| Yamaha Wolverine X4 850 XT-R |
2020–2023 |
| Yamaha Wolverine X4 EPS |
2021 |
| Yamaha Wolverine X4 EPS R S |
2022 |
| Yamaha Wolverine X4 EPS SE |
2021 |
| Yamaha Wolverine X4 EPS XT |
2022 |
| Yamaha Wolverine X4 Hunter |
2018–2020 |
| Yamaha Wolverine X4 R-Spec |
2023–2024 |
| Yamaha Wolverine X4 SE |
2018–2019 |
| Yamaha Wolverine X4 Special |
2018–2019 |
| Yamaha Wolverine X4 XT-R |
2020, 2023–2025 |
| Yamaha Wolverine X4 XTR |
2020, 2023 |
Why Choose a Genuine Yamaha OEM Ball Joint Set?
- Factory geometry for straight tracking
- Correct bushing and ball joint fit
- Restores original ride height and travel
- Spreads loads across the frame as Yamaha designed
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM suspension part, part #BG4-2530T-01-00
- Original mounting points and dimensions
- Corrosion-resistant coating where applicable
- Built for full-travel off-road and work use
- Works with factory bushings, ball joints and hardware
Materials and Construction
Yamaha suspension parts use high-strength steel for arms, knuckles and links with corrosion-resistant coatings, rubber or polymer bushings, and shocks with steel bodies, chromed shafts and oil or gas damping.
Common Reasons Riders Replace This Part
- Replacing bent arms, knuckles or links after an impact
- Fixing clunks and wandering from worn bushings
- Restoring ride height and damping
- Rebuilding the suspension on a high-hour machine
Signs Your Ball Joint Set Needs Replacing
- Clunking or knocking over bumps
- Wandering, pulling or loose handling
- Uneven or rapid tire wear
- Visible bends, cracks or leaking shocks
- Play in ball joints or bushings
Installation Tips
- Support the machine safely with the suspension unloaded.
- Check the Yamaha parts diagram for bushings, ball joints and hardware.
- Remove the damaged part and inspect the frame mounts.
- Install, tightening pivot bolts at ride height if the manual specifies.
- Torque all hardware, set toe, and recheck after the first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #BG4-2530T-01-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Ball Joint Set with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Ball Joint Set?
The genuine Yamaha part number is BG4-2530T-01-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #BG4-2530T-01-00 fit?
It fits 31 Yamaha Wolverine models from 2018 to 2026. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need an alignment after replacing suspension parts?
Yes, check and set toe after installation.
Should I replace both sides?
For wear items like bushings and shocks, replace in pairs to keep handling balanced.
Is OEM better than aftermarket suspension?
OEM restores factory ride and geometry. Aftermarket arms may add strength or travel but often change geometry.
Order Your Genuine Yamaha Ball Joint Set Today
Get your Wolverine X2 or Wolverine X4 back to factory condition. Add the genuine Yamaha Ball Joint Set (part #BG4-2530T-01-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.