Genuine Can-Am Ball Socket — OEM Part #293900157
Restore reliable power and electronics with a genuine Can-Am Ball Socket. Built for the Can-Am ATV or side-by-side, it matches the factory connectors and electrical values, with no splicing or adapters.
Harnesses, switches, relays, sensors, charging parts and control modules all talk to each other. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 252 Can-Am models from 2017 to 2026. See the full fitment list below.
Ball Socket at a Glance
-
OEM part number: 293900157
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: OEM Harness
-
Fits: Commander crossover side-by-side, Maverick sport side-by-side and Outlander ATV models, 2017–2026
-
Condition: New
Can-Am Models and Years This Ball Socket Fits
Genuine Can-Am part #293900157 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 252 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Can-Am Commander crossover side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Commander 700 |
2022–2026 |
8 |
| Can-Am Commander 1000R |
2022–2026 |
15 |
Can-Am Maverick sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Maverick R |
2024–2026 |
12 |
| Can-Am Maverick Sport |
2019–2026 |
18 |
| Can-Am Maverick Trail |
2018, 2020, 2022–2023, 2025–2026 |
13 |
| Can-Am Maverick Turbo |
2019–2026 |
56 |
| Can-Am Maverick X3 |
2017–2018 |
11 |
Can-Am Outlander ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Outlander 2x4 |
2025–2026 |
1 |
| Can-Am Outlander 4x4 |
2025–2026 |
38 |
| Can-Am Outlander 6x6 |
2026 |
6 |
| Can-Am Outlander 500 |
2023–2026 |
5 |
| Can-Am Outlander 700 |
2023–2026 |
9 |
| Can-Am Outlander 850 |
2025–2026 |
7 |
| Can-Am Outlander 1000R |
2025–2026 |
11 |
| Can-Am Outlander DPS |
2023 |
6 |
| Can-Am Outlander Ev |
2026 |
2 |
| Can-Am Outlander PRO |
2023–2026 |
31 |
| Can-Am Outlander X |
2023 |
1 |
| Can-Am Outlander XT |
2023 |
2 |
Why Choose a Genuine Can-Am OEM Ball Socket?
- Plug-and-play fit with factory connectors
- Correct electrical ratings for your machine
- Weather-sealed for mud, water and pressure washing
- Works with the factory ECM, gauge and diagnostics
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM electrical part, part #293900157
- Original connectors, terminals and pin-outs
- Water- and vibration-resistant construction
- Designed for the listed Can-Am models
- No splicing or adapters needed
Materials and Construction
Can-Am electrical parts use tinned copper conductors, sealed connectors, heat- and abrasion-resistant insulation and loom, and sealed housings for modules and sensors exposed to water and vibration.
Common Reasons Riders Replace This Part
- Fixing no-start, no-charge or intermittent faults
- Replacing harness sections damaged by rodents, heat or abrasion
- Replacing failed switches, relays, sensors or modules
- Restoring gauge functions and warning lights
Signs Your Ball Socket Needs Replacing
- No-start, clicking or intermittent power loss
- Check engine or warning lights
- Battery not charging
- Melted, corroded or broken connectors and wires
- Switches, gauges or accessories that do not work
Installation Tips
- Disconnect the negative battery cable first.
- Use the Can-Am parts and wiring diagrams to confirm routing and connectors.
- Clean corroded connectors with contact cleaner.
- Make sure every connector clicks fully and seals.
- Route wiring away from heat and moving parts, then test.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #293900157 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Ball Socket with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Ball Socket?
The genuine Can-Am part number is 293900157. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #293900157 fit?
It fits 252 Can-Am Commander, Maverick and Outlander models from 2017 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Will this part need programming?
Most plug-in parts do not. Some modules and DESS keys need dealer programming. Check your service manual or contact us before ordering.
How do I find an electrical problem before buying parts?
Start with the battery, grounds and fuses. Many faults are a loose ground or corroded connector.
Should I use dielectric grease?
A light coat on connector seals helps keep water out. Follow your service manual.
Order Your Genuine Can-Am Ball Socket Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Ball Socket, OEM part #293900157, from Witchdoctors today and keep your Can-Am ATV or side-by-side running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.
-
Ride Royal Blue — Pioneer, Tennessee: a base camp for the 900+ mile North Cumberland trail network
-
Spearhead Trails — southwest Virginia: a multi-trail system across the Virginia coalfields