Genuine CFMoto Banjo Bolt — OEM Part #7020-081004
Small parts hold big things together. The genuine CFMoto Banjo Bolt is the exact factory fastener specified for your CFMoto ATV or UTV, with the correct size, thread, length, grade and finish, so it fits right and holds torque the way CFMoto engineered it.
OEM hardware is engineered for a specific location and load. Using the wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 32 CFMoto models from 2018 to 2025. See the full fitment list below.
Banjo Bolt at a Glance
-
OEM part number: 7020-081004
-
Brand: CFMOTO (genuine factory part)
-
Part type: Brake Lines & Fittings
-
Fits: CForce ATV, UForce utility UTV and ZForce sport UTV models, 2018–2025
-
Condition: New
CFMoto Models and Years This Banjo Bolt Fits
Genuine CFMoto part #7020-081004 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto CForce ATV Fitment
| Model |
Model Years |
| CFMoto CForce 400 |
2018–2023, 2025 |
| CFMoto CForce 400 S |
2024 |
| CFMoto CForce 500 |
2022–2023 |
| CFMoto CForce 500 HO |
2018 |
| CFMoto CForce 500 S |
2018–2022, 2024–2025 |
| CFMoto CForce 600 |
2019–2025 |
| CFMoto CForce 600 Touring |
2020–2025 |
| CFMoto CForce 800 Touring |
2024–2025 |
| CFMoto CForce 800 XC |
2019–2024 |
| CFMoto CForce 1000 |
2023–2024 |
| CFMoto CForce 1000 Overland |
2021–2022, 2025 |
| CFMoto CForce 1000 Touring |
2024–2025 |
| CFMoto CForce EV110 |
2024 |
CFMoto UForce utility UTV Fitment
| Model |
Model Years |
| CFMoto UForce 500 |
2018–2020 |
| CFMoto UForce 800 |
2018–2022 |
| CFMoto UForce 800 XL |
2025 |
| CFMoto UForce 1000 |
2019–2025 |
| CFMoto UForce 1000 XL |
2022–2025 |
| CFMoto UForce U10 Pro |
2025 |
| CFMoto UForce U10 Pro Highland |
2025 |
| CFMoto UForce U10XL Pro |
2025 |
| CFMoto UForce U10XL Pro Highland |
2025 |
CFMoto ZForce sport UTV Fitment
| Model |
Model Years |
| CFMoto ZForce 500 |
2018–2022 |
| CFMoto ZForce 800 EX |
2018–2022 |
| CFMoto ZForce 800 Trail |
2018–2025 |
| CFMoto ZForce 950 EX |
2022 |
| CFMoto ZForce 950 HO EX |
2022–2024 |
| CFMoto ZForce 950 HO Sport |
2022–2023 |
| CFMoto ZForce 950 Sport |
2020–2025 |
| CFMoto ZForce 950 Sport 4 |
2024–2025 |
| CFMoto ZForce 950 Trail |
2023–2025 |
| CFMoto ZForce 1000 |
2018–2019 |
Why Choose a Genuine CFMoto OEM Banjo Bolt?
- Exact factory size, thread pitch and length
- Correct strength grade for the location it is used in
- Factory corrosion-resistant finish
- No guessing at the hardware store or mixing metric sizes
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM hardware, part #7020-081004
- Matches the original thread, length, head style and grade
- Zinc-plated or coated finish to resist corrosion (where applicable)
- Used across multiple CFMoto assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
CFMoto fasteners are made from heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, and finished with zinc or similar plating. Washers, clips and bushings are made from steel, spring steel, nylon or rubber depending on the job.
Common Reasons Riders Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping a spare supply for common repairs
Signs Your Banjo Bolt Needs Replacing
- Rounded heads or damaged threads
- Rust or corrosion that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that have already been reused
Installation Tips
- Check the CFMoto parts diagram to confirm the location and quantity you need.
- Clean the threads in the mating part, and chase damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #7020-081004 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Banjo Bolt and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Banjo Bolt with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Banjo Bolt?
The genuine CFMoto part number is 7020-081004. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #7020-081004 fit?
It fits 32 CFMoto CForce, UForce and ZForce models from 2018 to 2025. The complete list is in the fitment tables above.
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, thread pitch, length and finish often differ. For anything structural, such as suspension, brakes or engine parts, use the OEM fastener specified for that location.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity used at each location, and order enough to replace them all.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use. Replace them whenever they are removed.
Order Your Genuine CFMoto Banjo Bolt Today
Get your CFMoto ATV or UTV back to factory condition. Add the genuine CFMoto Banjo Bolt (part #7020-081004) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.