Genuine CFMoto Battery Box Foam — OEM Part #5270-150002
Electrical gremlins are some of the most frustrating problems to chase. The genuine CFMoto Battery Box Foam plugs into your UForce 600 or UForce 800 with the original connectors, pin-outs and specifications, so it works with the factory wiring and electronics the first time.
Harnesses, switches, relays, sensors, charging parts and control modules all talk to each other. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 2 CFMoto models from 2023 to 2025. See the full fitment list below.
Battery Box Foam at a Glance
-
OEM part number: 5270-150002
-
Brand: CFMOTO (genuine factory part)
-
Part type: Battery Box & Covers
-
Fits: UForce utility UTV models, 2023–2025
-
Condition: New
CFMoto Models and Years This Battery Box Foam Fits
Genuine CFMoto part #5270-150002 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto UForce utility UTV Fitment
| Model |
Model Years |
| CFMoto UForce 600 |
2023–2025 |
| CFMoto UForce 800 XL |
2025 |
Why Choose a Genuine CFMoto OEM Battery Box Foam?
- Plug-and-play fit with factory connectors
- Correct electrical ratings for your machine
- Weather-sealed for mud, water and pressure washing
- Works with the factory ECU, dash and diagnostics
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM electrical part, part #5270-150002
- Original connectors, terminals and pin-outs
- Water- and vibration-resistant construction
- Designed for the listed CFMoto models
- No splicing or adapters needed
Materials and Construction
CFMoto electrical parts use tinned copper conductors, weather-sealed connectors with silicone seals, heat- and abrasion-resistant insulation and loom, and potted or sealed housings for modules and sensors exposed to water and vibration.
Common Reasons Riders Replace This Part
- Fixing no-start, no-charge or intermittent electrical faults
- Replacing harness sections damaged by rodents, heat or abrasion
- Replacing failed switches, relays, sensors or modules
- Restoring dash functions and warning lights
Signs Your Battery Box Foam Needs Replacing
- No-start, clicking or intermittent power loss
- Check engine or warning lights
- Battery not charging or voltage problems
- Melted, corroded or broken connectors and wires
- Switches, gauges or accessories that do not work
Installation Tips
- Disconnect the negative battery cable before working on electrical parts.
- Use the CFMoto parts diagram and wiring diagram to confirm routing and connectors.
- Inspect connectors for corrosion and clean them with electrical contact cleaner.
- Install the new part, making sure every connector clicks fully and seals.
- Route and secure wiring away from heat and moving parts, then test operation.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #5270-150002 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Battery Box Foam and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Battery Box Foam with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Battery Box Foam?
The genuine CFMoto part number is 5270-150002. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #5270-150002 fit?
It fits the UForce 600 (2023–2025); UForce 800 XL (2025).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Will this part need programming?
Most plug-in electrical parts do not. Some control modules or keys may need dealer programming. Check your service manual or call us before ordering.
How can I find an electrical problem before buying parts?
Start with the battery, grounds and fuses. Many faults come from a loose ground or corroded connector, not a failed part.
Should I use dielectric grease on connectors?
A light coat on connector seals can help keep water out. Follow your service manual for your specific connectors.
Order Your Genuine CFMoto Battery Box Foam Today
Get your UForce 600 or UForce 800 back to factory condition. Add the genuine CFMoto Battery Box Foam (part #5270-150002) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.