Genuine Polaris Bolt — OEM Part #7519650
Small parts hold big things together. The genuine Polaris Bolt is the exact factory fastener specified for your Polaris ATV or side-by-side, with the correct size, thread, length, grade and finish, so it fits right and holds torque.
OEM hardware is engineered for a specific location and load. The wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 291 Polaris models from 2022 to 2026. See the full fitment list below.
Bolt at a Glance
-
OEM part number: 7519650
-
Brand: Polaris (genuine factory part)
-
Part type: OEM Screw
-
Fits: General crossover side-by-side, Outlaw ATV, RZR sport side-by-side, Ranger utility side-by-side, Scrambler ATV, Sportsman ATV and Xpedition adventure side-by-side models, 2022–2026
-
Condition: New
Polaris Models and Years This Bolt Fits
Genuine Polaris part #7519650 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 291 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris General crossover side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris General 1000 |
2022–2026 |
10 |
| Polaris General XP |
2022–2026 |
14 |
Polaris Outlaw ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Outlaw 70 |
2022–2025 |
4 |
Polaris RZR sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris RZR |
2025 |
2 |
| Polaris RZR 200 |
2023–2026 |
5 |
| Polaris RZR 900 |
2023–2026 |
5 |
| Polaris RZR PRO |
2023–2026 |
38 |
| Polaris RZR Trail |
2023–2026 |
3 |
| Polaris RZR Trctr |
2025 |
1 |
| Polaris RZR Turbo |
2023–2024 |
10 |
| Polaris RZR XP |
2023–2026 |
14 |
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger |
2023 |
1 |
| Polaris Ranger 150 |
2023–2024 |
3 |
| Polaris Ranger 500 |
2026 |
1 |
| Polaris Ranger 530 |
2023, 2025 |
1 |
| Polaris Ranger 570 |
2023–2026 |
18 |
| Polaris Ranger 1000 |
2023–2026 |
32 |
| Polaris Ranger Diesel |
2023–2024, 2026 |
5 |
| Polaris Ranger EV |
2023–2024 |
4 |
| Polaris Ranger MD |
2024 |
1 |
| Polaris Ranger MS |
2026 |
1 |
| Polaris Ranger SP |
2026 |
1 |
| Polaris Ranger Xd |
2026 |
7 |
| Polaris Ranger XP |
2023–2024, 2026 |
19 |
Polaris Scrambler ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Scrambler 1000 |
2023–2026 |
2 |
| Polaris Scrambler XP |
2026 |
1 |
Polaris Sportsman ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Sportsman 450 |
2022–2026 |
7 |
| Polaris Sportsman 570 |
2022–2026 |
43 |
| Polaris Sportsman 850 |
2023–2026 |
6 |
| Polaris Sportsman 1000 |
2023–2026 |
3 |
| Polaris Sportsman Touring |
2022–2026 |
8 |
| Polaris Sportsman XP |
2023–2026 |
11 |
Polaris Xpedition adventure side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Xpedition Adv |
2024–2026 |
4 |
| Polaris Xpedition XP |
2024–2026 |
4 |
| Polaris Xpedition Xp5 |
2024–2026 |
2 |
Why Choose a Genuine Polaris OEM Bolt?
- Exact factory size, thread pitch and length
- Correct strength grade for its location
- Factory corrosion-resistant finish
- No guessing at sizes or grades
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM hardware, part #7519650
- Matches the original thread, length, head style and grade
- Plated or coated to resist corrosion (where applicable)
- Used across several Polaris assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
Polaris fasteners are heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, with zinc or similar plating. Washers, clips and bushings are steel, spring steel, nylon or rubber depending on the job.
Common Reasons Riders Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping spares for common repairs
Signs Your Bolt Needs Replacing
- Rounded heads or damaged threads
- Rust that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that were already reused
Installation Tips
- Check the Polaris parts diagram for the location and quantity you need.
- Clean the threads in the mating part, chasing damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #7519650 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Bolt with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Bolt?
The genuine Polaris part number is 7519650. Use it to match this part to your factory parts diagram.
Which Polaris models does part #7519650 fit?
It fits 291 Polaris General, Outlaw, RZR, Ranger, Scrambler, Sportsman and Xpedition models from 2022 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, pitch, length and finish often differ. For suspension, brakes or engine parts, use the specified OEM fastener.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity at each location.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use.
Order Your Genuine Polaris Bolt Today
Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris Bolt (part #7519650) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.