Genuine CFMoto Brake Line Clip, Left Front — OEM Part #5HY0-080003
Stop with confidence with a genuine CFMoto Brake Line Clip, Left Front. Built for the UForce 800 or UForce 1000, this OEM brake part fits the factory calipers, lines and mounts, so pedal feel and stopping power return to the way CFMoto designed them.
Brake lines, calipers, master cylinders, pads, rotors and parking brakes work as a hydraulic and mechanical system. A leak, worn part or wrong fitting can lead to a soft pedal or brake failure. This part is confirmed for 3 CFMoto models from 2019 to 2025. See the full fitment list below.
Brake Line Clip, Left Front at a Glance
-
OEM part number: 5HY0-080003
-
Brand: CFMOTO (genuine factory part)
-
Part type: Brake Lines & Fittings
-
Position: Front, Left
-
Fits: UForce utility UTV models, 2019–2025
-
Condition: New
CFMoto Models and Years This Brake Line Clip, Left Front Fits
Genuine CFMoto part #5HY0-080003 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto UForce utility UTV Fitment
| Model |
Model Years |
| CFMoto UForce 800 XL |
2025 |
| CFMoto UForce 1000 |
2019–2025 |
| CFMoto UForce 1000 XL |
2022–2025 |
Why Choose a Genuine CFMoto OEM Brake Line Clip, Left Front?
- Factory hydraulic specification for proper pedal feel
- Direct fit with original calipers, lines and mounts
- Built for the heat and contamination of off-road braking
- Restores safe, predictable stopping power
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM brake part, part #5HY0-080003
- Matches original fittings, banjo bolts and mounting points
- Built to CFMoto's brake system specification
- Designed for mud, water and steep terrain
- Works with DOT brake fluid as specified in your manual
Materials and Construction
CFMoto brake parts use reinforced rubber or braided brake hose, steel hard lines and fittings, aluminum caliper and master-cylinder bodies with rubber seals compatible with DOT fluid, and steel rotors and friction pads designed for off-road conditions.
Common Reasons Riders Replace This Part
- Fixing a soft, spongy or sinking brake pedal
- Replacing leaking lines, calipers or master cylinders
- Replacing worn pads and rotors
- Restoring a parking brake that will not hold
Signs Your Brake Line Clip, Left Front Needs Replacing
- Spongy pedal or lever, or one that sinks to the floor
- Brake fluid leaks at lines, fittings or calipers
- Grinding, squealing or pulling to one side
- Scored, warped or thin rotors
- A parking brake that does not hold on a slope
Installation Tips
- Use the CFMoto parts diagram to confirm fittings, crush washers and routing.
- Protect painted surfaces from brake fluid and cap open lines to keep dirt out.
- Install the new part with new crush washers on banjo fittings and torque to spec.
- Refill with fresh DOT fluid of the type listed in your manual and bleed the system fully.
- Test pedal or lever firmness and brake function at low speed before riding normally.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #5HY0-080003 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Brake Line Clip, Left Front and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Brake Line Clip, Left Front with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Brake Line Clip, Left Front?
The genuine CFMoto part number is 5HY0-080003. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #5HY0-080003 fit?
It fits the UForce 800 XL (2025); UForce 1000 (2019–2025); UForce 1000 XL (2022–2025).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
What brake fluid should I use?
Use the DOT fluid type specified in your CFMoto owner's manual or on the master-cylinder cap. Do not mix DOT 5 (silicone) with DOT 3, 4 or 5.1.
Do I need to bleed the brakes after replacing this part?
Yes, any time the hydraulic system is opened. Air in the lines causes a soft pedal or lever.
Should I replace rotors when I change pads?
Not always. Measure rotor thickness and check for scoring or warping. If it is below the minimum spec, replace it.
Order Your Genuine CFMoto Brake Line Clip, Left Front Today
Ride with confidence on parts built for your machine. Order the genuine CFMoto Brake Line Clip, Left Front, OEM part #5HY0-080003, from Witchdoctors today and keep your UForce 800 or UForce 1000 running the way CFMoto designed it.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.