Genuine CFMoto Brake Pedal Return Spring — OEM Part #9GQ0-080202
Get crisp, predictable control back with a genuine CFMoto Brake Pedal Return Spring. Built for the CForce 400 or CForce 500, it fits the original pivots, brackets and connectors for factory feel and reliable operation.
Pedals, levers, cables, throttles and hand controls translate your input into action. Worn or sticky parts make the machine harder and less safe to operate. This part is confirmed for 2 CFMoto models from 2016 to 2022. See the full fitment list below.
Brake Pedal Return Spring at a Glance
-
OEM part number: 9GQ0-080202
-
Brand: CFMOTO (genuine factory part)
-
Part type: Pedals & Components
-
Fits: CForce ATV models, 2016–2022
-
Condition: New
CFMoto Models and Years This Brake Pedal Return Spring Fits
Genuine CFMoto part #9GQ0-080202 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto CForce ATV Fitment
| Model |
Model Years |
| CFMoto CForce 400 |
2016–2022 |
| CFMoto CForce 500 S |
2017–2022 |
Why Choose a Genuine CFMoto OEM Brake Pedal Return Spring?
- Factory feel, travel and return
- Direct fit with original brackets, pivots and connectors
- Built for mud, water and cold-weather use
- Restores safe, predictable control
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM control part, part #9GQ0-080202
- Matches original mounting and adjustment
- Corrosion- and wear-resistant construction
- Designed for the listed CFMoto models
- Works with factory cables, sensors and switches
Materials and Construction
CFMoto control parts use steel or aluminum pedals and levers, lined and sealed cables, durable polymer bushings and grips, and sealed sensors for electronic throttles.
Common Reasons Riders Replace This Part
- Fixing sticky, binding or broken controls
- Replacing cables that are frayed or stretched
- Replacing bent or snapped levers and pedals
- Restoring throttle response and idle return
Signs Your Brake Pedal Return Spring Needs Replacing
- Throttle that sticks or will not return to idle
- Stretched, frayed or binding cables
- Bent, cracked or broken levers and pedals
- Excessive free play
- Warning lights tied to the throttle pedal sensor
Installation Tips
- Use the CFMoto parts diagram to confirm routing, clips and adjusters.
- Route new cables exactly like the originals, away from heat and pinch points.
- Adjust free play to the specification in your service manual.
- Check that the throttle returns fully to idle with the steering at full lock both ways.
- Test everything at low speed before riding normally.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #9GQ0-080202 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Brake Pedal Return Spring and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Brake Pedal Return Spring with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Brake Pedal Return Spring?
The genuine CFMoto part number is 9GQ0-080202. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #9GQ0-080202 fit?
It fits the CForce 400 (2016–2022); CForce 500 S (2017–2022).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
How do I adjust cable free play?
Use the adjuster at the lever, pedal or engine end and set free play to the spec in your service manual.
Why does my throttle stick?
Common causes are dirt in the cable or housing, a kinked cable or a sticking throttle body. Replace damaged cables.
Are grips and hand guards model-specific?
Many are. Use the fitment table to confirm compatibility.
Order Your Genuine CFMoto Brake Pedal Return Spring Today
Ride with confidence on parts built for your machine. Order the genuine CFMoto Brake Pedal Return Spring, OEM part #9GQ0-080202, from Witchdoctors today and keep your CForce 400 or CForce 500 running the way CFMoto designed it.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.