Camshaft 420281801 by Can-Am

Genuine Can-Am Camshaft — OEM Part #420281801

Rebuild with confidence. The genuine Can-Am Camshaft is the factory engine part for your Can-Am ATV or side-by-side, machined to BRP's original specification for proper clearances, sealing and long service life.

Engine internals and castings work under heat, pressure and constant vibration. A part that is even slightly off can cause oil leaks, low compression, noise or major engine damage. This part is confirmed for 56 Can-Am models from 2012 to 2026. See the full fitment list below.

Camshaft at a Glance

• OEM part number: 420281801
• Brand: Can-Am by BRP (genuine factory part)
• Part type: Cams & Components
• Fits: Outlander ATV and Renegade sport ATV models, 2012–2026
• Condition: New

Can-Am Models and Years This Camshaft Fits

Genuine Can-Am part #420281801 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

This part is shared across 56 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.

Can-Am Outlander ATV Fitment

Can-Am Renegade sport ATV Fitment

Why Choose a Genuine Can-Am OEM Camshaft?

• Factory tolerances for correct clearances and fit
• Designed to work with the other OEM parts in the Rotax engine
• Helps protect any applicable BRP warranty coverage
• Lowers the risk of a repeat teardown from a poor-fitting part
• Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support

Features and Materials

Key Features

• Genuine Can-Am OEM engine part, part #420281801
• Machined to BRP's original specifications
• Matches factory sealing surfaces and mounting points
• Made for the heat and loads of the listed engines
• Pairs with the gaskets and seals on the same parts diagram

Materials and Construction

Rotax engine parts use materials chosen for their location: aluminum alloy castings for cases, cylinders and covers; hardened, heat-treated steel for shafts, gears and valvetrain parts; and multi-layer or composite gaskets with elastomer oil seals.

Common Reasons Riders Replace This Part

• Full or partial engine rebuilds
• Repairs after overheating or oil starvation
• Fixing oil leaks at cases, covers and seals
• Restoring compression and power on a high-hour engine

Signs Your Camshaft Needs Replacing

• Oil leaks around covers, cases or seals
• Ticking, knocking or rattling from the engine
• Low compression or noticeable power loss
• Blue or white smoke, or high oil use
• Metal debris in the oil or on the drain plug magnet

Installation Tips

1. Follow the BRP service manual for your model; engine work needs exact procedures and torque specs.
2. Clean all mating surfaces and replace any gaskets and seals you disturb.
3. Measure critical clearances with proper tools before final assembly.
4. Lubricate moving parts with clean engine oil or assembly lube as specified.
5. Torque fasteners in sequence, refill fluids and check for leaks.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Can-Am Parts Diagrams for Your Machine

Find part #420281801 and every part installed with it in the factory Can-Am parts diagrams for your model:

• 2024 Can-Am Renegade 1000R EFI X xc parts diagrams
• 2020 Can-Am Outlander MAX 1000 6x6 EFI parts diagrams
• 2017 Can-Am Outlander 1000 parts diagrams
• 2017 Can-Am Outlander 1000 6x6 EFI parts diagrams

Related OEM Parts for the Same Machines

Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:

• Can-Am Ball Bearing (#420932433)
• Can-Am Crankshaft (#420219736)
• Can-Am Crankcase (#420685253)
• Can-Am Front Engine Cylinder (#420623064)
• Can-Am Front Engine Cylinder (#420413111)
• Can-Am Front Engine Cylinder (#420413106)

Recommended Accessories and Maintenance Supplies

Pair your Camshaft with these parts and supplies:

• Engine rebuild kits — Rebuild kits for UTV and ATV engines
• Engine gaskets and seals — Gaskets and seals for leak-free rebuilds
• Oil change kits — Oil change kits for after your rebuild
• Engine oil — Powersports oil for break-in and beyond
• Can-Am OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• UTV/ATV Engine Components: A Buyer’s Guide
• ATV/UTV Engine Crankcase Buyer’s Guide
• Stop UTV Gasket Leaks: Expert Installation Guide
• Can-Am OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this Can-Am Camshaft?

The genuine Can-Am part number is 420281801. Use it to match this part to your factory parts diagram.

Which Can-Am models does part #420281801 fit?

It fits 56 Can-Am Outlander and Renegade models from 2012 to 2026. The complete list is in the fitment tables above.

Is this a genuine Can-Am part?

Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.

Should I replace gaskets and seals at the same time?

Yes. Replace any gasket or seal you disturb. They are on the same Can-Am parts diagram.

Is OEM worth it over aftermarket engine parts?

For internals, OEM parts match the exact clearances the Rotax engine was designed around, which helps avoid noise, wear and leaks.

Can I do this repair myself?

Experienced home mechanics can do many engine repairs with the service manual and the right tools. Precision internal work is best left to a qualified technician if you are not set up for it.

Order Your Genuine Can-Am Camshaft Today

Ride with confidence on parts built for your machine. Order the genuine Can-Am Camshaft, OEM part #420281801, from Witchdoctors today and keep your Can-Am ATV or side-by-side running the way BRP designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Can-Am OEM parts

Where to Ride Your Can-Am

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Paiute ATV Trail — central Utah: 250 miles of marked trail linking to 2,000+ more
• Muddy Bottoms ATV & Recreation Park — Sarepta, Louisiana: about 150 miles of trails