Genuine Can-Am Cap — OEM Part #708004198
Comfort and safety go hand in hand on a long ride. The genuine Can-Am Cap restores the factory seating and restraint system on your Outlander models, mounting exactly where the original did.
Seats, belts, nets and their mounts keep riders in position over rough ground. Worn or damaged parts reduce comfort and, more importantly, protection. This part is confirmed for 83 Can-Am models from 2026. See the full fitment list below.
Cap at a Glance
-
OEM part number: 708004198
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Seat Repair
-
Fits: Outlander ATV models, 2026
-
Condition: New
Can-Am Models and Years This Cap Fits
Genuine Can-Am part #708004198 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 83 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Can-Am Outlander ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Outlander 2x4 |
2026 |
1 |
| Can-Am Outlander 4x4 |
2026 |
33 |
| Can-Am Outlander 6x6 |
2026 |
6 |
| Can-Am Outlander 500 |
2026 |
4 |
| Can-Am Outlander 700 |
2026 |
7 |
| Can-Am Outlander 850 |
2026 |
6 |
| Can-Am Outlander 1000R |
2026 |
11 |
| Can-Am Outlander Ev |
2026 |
2 |
| Can-Am Outlander PRO |
2026 |
13 |
Why Choose a Genuine Can-Am OEM Cap?
- Factory fit with the original seat base, frame and mounts
- Restores BRP's designed rider support and restraint
- Weather-resistant materials for outdoor use
- Keeps safety systems working as intended
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM part, part #708004198
- Original mounting points and hardware
- UV- and water-resistant covers and webbing (where applicable)
- Designed for the listed Can-Am models
- Works with factory seat latches, belts and interlocks
Materials and Construction
Can-Am seating parts use UV-resistant vinyl, foam that resists water absorption, and steel or plastic seat bases. Belts use high-strength polyester webbing with steel latch hardware built to factory specification.
Common Reasons Riders Replace This Part
- Replacing torn or worn seat covers and cushions
- Replacing frayed, cut or sun-damaged belts
- Fixing loose or broken seat mounts and latches
- Restoring a machine for resale
Signs Your Cap Needs Replacing
- Torn vinyl or waterlogged foam
- Belt webbing that is frayed, cut or faded
- Belts that do not retract or latch
- Seats that rock or will not lock in place
- Broken nets, buckles or mounts
Installation Tips
- Use the Can-Am parts diagram to identify hardware and any belt interlock wiring.
- Remove the old part, noting how belts and wiring are routed.
- Install with the correct factory hardware.
- Torque belt anchor bolts to spec; never substitute hardware on restraint anchors.
- Test latches, retractors and interlocks before riding.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #708004198 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Cap with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Cap?
The genuine Can-Am part number is 708004198. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #708004198 fit?
It fits 83 Can-Am Outlander models from 2026 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Should seat belts be replaced after an accident?
Yes. Belts that restrained a rider in a crash or rollover can be stretched or damaged and should be replaced.
Will this fit an aftermarket seat?
It is designed for the factory Can-Am seat and mounts on the listed models.
How do I keep vinyl seats from cracking?
Keep them clean, use a UV protectant made for vinyl, and cover the machine when parked outside.
Order Your Genuine Can-Am Cap Today
Get your Outlander models back to factory condition. Add the genuine Can-Am Cap (part #708004198) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.