Genuine Polaris Oil Pump Drive Chain — OEM Part #3050072
Protect your engine with a genuine Polaris Oil Pump Drive Chain. It is built to the original specification for your Polaris ATV or side-by-side, so it seals correctly, holds pressure and routes oil the way it was designed.
Oil pumps, lines, coolers, filters and dipsticks keep oil flowing, cool and clean. One leaking line or worn pump can starve bearings and destroy an engine quickly. This part is confirmed for 18 Polaris models from 2017 to 2026. See the full fitment list below.
Oil Pump Drive Chain at a Glance
-
OEM part number: 3050072
-
Brand: Polaris (genuine factory part)
-
Part type: Oil Pump & Components
-
Fits: ACE single-seat, RZR sport side-by-side and Ranger utility side-by-side models, 2017–2026
-
Condition: New
Polaris Models and Years This Oil Pump Drive Chain Fits
Genuine Polaris part #3050072 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris ACE single-seat Fitment
| Model |
Model Years |
| Polaris ACE 150 |
2017 |
| Polaris ACE 150 EFI |
2020–2021 |
| Polaris ACE 150 EFI Indy |
2018–2019 |
| Polaris ACE 150 EFI Indy MD (International) |
2019 |
| Polaris ACE 150 EFI MD (International) |
2021 |
| Polaris ACE 150 EFI MD White (International) |
2020 |
| Polaris ACE 150 MD (International) |
2017–2018 |
Polaris RZR sport side-by-side Fitment
| Model |
Model Years |
| Polaris RZR 200 |
2021–2026 |
| Polaris RZR 200 Au |
2025 |
| Polaris RZR 200 Evap |
2023–2026 |
| Polaris RZR 200 MD |
2025 |
| Polaris RZR 200 Tld Au (International) |
2023 |
| Polaris RZR 200 Tld Evap |
2023 |
| Polaris RZR 200 Tld MD (International) |
2023 |
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger 150 EFI |
2018–2025 |
| Polaris Ranger 150 EFI Au |
2025 |
| Polaris Ranger 150 EFI MD |
2025 |
| Polaris Ranger EFI Au (International) |
2022 |
Why Choose a Genuine Polaris OEM Oil Pump Drive Chain?
- Correct fit and sealing with factory fittings
- Maintains designed oil pressure and flow
- Heat- and oil-resistant materials
- Protects expensive engine internals
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM part, part #3050072
- Original fittings, routing and mounting points
- Made for continuous exposure to hot oil
- Designed for the listed engines
- Pairs with OEM O-rings, gaskets and clamps on the same diagram
Materials and Construction
Polaris oil-system parts combine aluminum and steel housings, reinforced hose rated for hot oil, and nitrile or fluoroelastomer O-rings and seals for long-term oil and heat exposure.
Common Reasons Riders Replace This Part
- Fixing oil leaks from lines, fittings or coolers
- Restoring oil pressure during a rebuild
- Routine replacement of wear items at service
- Repairing damage from a trail impact
Signs Your Oil Pump Drive Chain Needs Replacing
- Oil drips or residue around lines, fittings or the cooler
- Oil pressure warning or low readings
- Cracked, hardened or swollen hoses
- A damaged dipstick or tube
- Engine running hotter than normal
Installation Tips
- Drain the oil and let the engine cool first.
- Check the Polaris parts diagram for routing and the O-rings or crush washers you need.
- Lubricate new O-rings with clean oil and torque fittings to spec without overtightening.
- Refill with the correct oil grade and quantity for your model.
- Run the engine, check for leaks, then recheck the oil level.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #3050072 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Oil Pump Drive Chain with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Oil Pump Drive Chain?
The genuine Polaris part number is 3050072. Use it to match this part to your factory parts diagram.
Which Polaris models does part #3050072 fit?
It fits 18 Polaris ACE, RZR and Ranger models from 2017 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Which oil should I use?
Use the oil type and quantity in your Polaris owner's manual. An oil change kit makes sure you have the right filter and washer too.
Do I need new O-rings or crush washers?
Yes. Reused seals are a common cause of leaks.
How often should I change oil and filter?
Follow the intervals in your owner's manual, and change it sooner after dust, mud, water or heavy loads.
Order Your Genuine Polaris Oil Pump Drive Chain Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Oil Pump Drive Chain, OEM part #3050072, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.