Genuine Can-Am Clevis Pin — OEM Part #250400075
Keep your Can-Am ATV or side-by-side working with a genuine Can-Am Clevis Pin. This OEM part is built to BRP's original specification, so it works with the factory bed, rack or hitch without guesswork.
Beds, racks, storage bins and hitch parts carry real weight over rough ground. Worn latches, cracked bins and bent brackets make loads unsafe and let water ruin what you carry. This part is confirmed for 67 Can-Am models from 2016 to 2026. See the full fitment list below.
Clevis Pin at a Glance
-
OEM part number: 250400075
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Cargo & Dump Box Repair
-
Fits: Commander crossover side-by-side, Defender utility side-by-side, Maverick sport side-by-side and Traxter utility side-by-side models, 2016–2026
-
Condition: New
Can-Am Models and Years This Clevis Pin Fits
Genuine Can-Am part #250400075 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 67 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Can-Am Commander crossover side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Commander 700 |
2022–2026 |
8 |
| Can-Am Commander 1000R |
2021–2026 |
15 |
Can-Am Defender utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Defender |
2016–2017 |
2 |
| Can-Am Defender 6x6 |
2020 |
1 |
| Can-Am Defender 800 |
2016 |
1 |
| Can-Am Defender 1000 |
2016 |
1 |
| Can-Am Defender HD5 |
2017–2020 |
1 |
| Can-Am Defender HD8 |
2017–2020 |
2 |
| Can-Am Defender HD10 |
2017–2020 |
14 |
| Can-Am Defender Lone |
2018 |
1 |
| Can-Am Defender PRO |
2020 |
1 |
| Can-Am Defender T |
2017 |
1 |
Can-Am Maverick sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Maverick Sport |
2025 |
1 |
Can-Am Traxter utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Traxter |
2017 |
1 |
| Can-Am Traxter HD5 |
2017–2020 |
2 |
| Can-Am Traxter HD8 |
2016–2020 |
3 |
| Can-Am Traxter HD10 |
2018–2020 |
7 |
| Can-Am Traxter T |
2017–2018, 2020 |
5 |
Why Choose a Genuine Can-Am OEM Clevis Pin?
- Factory fit with the original bed, rack, box or frame
- Restores secure latching and load retention
- Keeps stored gear protected from water and dust
- Built for the rated cargo and towing use of the listed models
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM part, part #250400075
- Original mounting points and hardware
- Made for the vibration and loads of work and trail use
- Corrosion-resistant finish or UV-stable plastic, depending on the part
- Works with factory latches, struts and LinQ accessories where equipped
Materials and Construction
Can-Am cargo and storage parts use high-strength steel for load-bearing brackets, racks and hitch parts, and impact-resistant, UV-stabilized plastics for boxes, bins and lids. Rubber seals help keep moisture out.
Common Reasons Riders Replace This Part
- Hauling tools, feed, firewood and equipment
- Towing within the rated limits for your model
- Keeping gear dry in factory storage
- Repairing a bed, tailgate or box after damage
Signs Your Clevis Pin Needs Replacing
- Tailgates or lids that will not stay latched
- Cracked bins, boxes or bed panels
- Bent or broken rack and hitch brackets
- Torn or missing seals that let water in
- Dump-bed latches or struts that no longer hold
Installation Tips
- Empty the bed or compartment and support lids or beds before removing parts.
- Use the Can-Am parts diagram to identify fasteners and linkage.
- Remove the worn part and inspect nearby hinges, latches and brackets.
- Install with hardware finger-tight, check alignment, then torque to spec.
- Test latches, hinges and load security before carrying a full load.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #250400075 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Clevis Pin with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Clevis Pin?
The genuine Can-Am part number is 250400075. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #250400075 fit?
It fits 67 Can-Am Commander, Defender, Maverick and Traxter models from 2016 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Does this change my cargo or towing capacity?
No. Capacities are set by BRP for your model. This part restores factory function only.
Will it fit aftermarket racks or accessories?
It is designed for the factory Can-Am setup on the listed models. Aftermarket accessories may need their own hardware.
Should I replace the latch hardware too?
If the latch, striker or hinge is worn, replace it at the same time so the new part closes and holds properly.
Order Your Genuine Can-Am Clevis Pin Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Clevis Pin, OEM part #250400075, from Witchdoctors today and keep your Can-Am ATV or side-by-side running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.