Genuine CFMoto CVT Case — OEM Part #0GSV-0131B0
Get crisp engagement and smooth acceleration back with a genuine CFMoto CVT Case. Built for the CForce 400 or CForce 500, this OEM part matches the original CVT specification, so belt alignment, shift points and cooling airflow stay where they should be.
The primary and secondary clutches, belt, covers and cooling ducts work as one system. Worn or mismatched parts cause belt slip, harsh engagement, overheating and early belt failure. This part is confirmed for 4 CFMoto models from 2022 to 2025. See the full fitment list below.
CVT Case at a Glance
-
OEM part number: 0GSV-0131B0
-
Brand: CFMOTO (genuine factory part)
-
Part type: Clutch Covers & Gaskets
-
Fits: CForce ATV models, 2022–2025
-
Condition: New
CFMoto Models and Years This CVT Case Fits
Genuine CFMoto part #0GSV-0131B0 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto CForce ATV Fitment
| Model |
Model Years |
| CFMoto CForce 400 |
2022–2023, 2025 |
| CFMoto CForce 400 S |
2024 |
| CFMoto CForce 500 |
2022–2023 |
| CFMoto CForce 500 S |
2024–2025 |
Why Choose a Genuine CFMoto OEM CVT Case?
- Factory calibration for engagement, shift-out and backshift
- Correct belt alignment and deflection
- Keeps CVT cooling and sealing at factory standard
- Helps your drive belt last longer
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM CVT part, part #0GSV-0131B0
- Built to CFMoto's original clutch specifications
- Precision-machined surfaces where applicable
- Designed for the listed CFMoto CVT systems
- Works with OEM belts, covers, seals and ducts
Materials and Construction
CFMoto CVT parts use precision-cast or machined aluminum sheaves and housings, hardened steel shafts and rollers, wear-resistant bushings, and heat-stable plastic or composite covers and ducts. Seals and gaskets keep water and dust out of the belt case.
Common Reasons Riders Replace This Part
- Fixing belt slip, jerky engagement or poor top speed
- Replacing worn sheaves, rollers, springs or bushings
- Repairing covers, seals and ducts after water intrusion
- Routine CVT service and belt replacement
Signs Your CVT Case Needs Replacing
- Belt slipping, squealing or burning smell
- Jerky, harsh or delayed engagement
- Loss of top speed or poor acceleration
- Glazed belt or frequent belt failures
- Water or debris inside the CVT cover
Installation Tips
- Remove the CVT cover and clean out belt dust before taking anything apart.
- Use the correct CFMoto clutch tools. Primary and secondary clutches are under spring tension.
- Inspect sheave faces, rollers, bushings and the belt for wear while you are in there.
- Assemble to the factory torque specs and check belt deflection and alignment.
- Replace cover seals and gaskets, then follow the belt break-in procedure.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #0GSV-0131B0 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the CVT Case and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your CVT Case with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto CVT Case?
The genuine CFMoto part number is 0GSV-0131B0. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #0GSV-0131B0 fit?
It fits the CForce 400 (2022–2023, 2025); CForce 400 S (2024); CForce 500 (2022–2023); CForce 500 S (2024–2025).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Should I replace the belt at the same time?
If the belt is glazed, cracked or worn to the minimum width, replace it with the clutch parts so you start fresh.
What causes CVT belts to burn up?
The usual causes are riding in high range at low speed, heavy loads, water in the CVT and worn clutch parts. Use low range for slow, heavy work.
Do I need special tools?
Yes. Most CFMoto clutches need a clutch holder and puller to disassemble safely. Using the wrong tools can damage parts.
Order Your Genuine CFMoto CVT Case Today
Ride with confidence on parts built for your machine. Order the genuine CFMoto CVT Case, OEM part #0GSV-0131B0, from Witchdoctors today and keep your CForce 400 or CForce 500 running the way CFMoto designed it.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.