Badge

CVT Case Wind Guard 0GSV-013103-3000 by CFMOTO

Price
$14.99 USD
Normally Ships in 10-14 Business Days

Inventory:

Loading..
SKU: 0GSV-013103-3000
In stock and ready for shipping

SKU: 0GSV-013103-3000

Genuine CFMoto CVT Case Wind Guard — OEM Part #0GSV-013103-3000

Your CVT turns engine power into ground speed, and it depends on precise parts working together. The genuine CFMoto CVT Case Wind Guard restores factory clutch performance on your CForce 400 or CForce 500, built to the weights, angles and tolerances CFMoto calibrated for smooth engagement and strong backshift.

The primary and secondary clutches, belt, covers and cooling ducts work as one system. Worn or mismatched parts cause belt slip, harsh engagement, overheating and early belt failure. This part is confirmed for 4 CFMoto models from 2022 to 2025. See the full fitment list below.

CVT Case Wind Guard at a Glance

  • OEM part number: 0GSV-013103-3000
  • Brand: CFMOTO (genuine factory part)
  • Part type: Clutch Covers & Gaskets
  • Fits: CForce ATV models, 2022–2025
  • Condition: New

CFMoto Models and Years This CVT Case Wind Guard Fits

Genuine CFMoto part #0GSV-013103-3000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto CForce ATV Fitment

Model Model Years
CFMoto CForce 400 2022–2023, 2025
CFMoto CForce 400 S 2024
CFMoto CForce 500 2022–2023
CFMoto CForce 500 S 2024–2025

Why Choose a Genuine CFMoto OEM CVT Case Wind Guard?

  • Factory calibration for engagement, shift-out and backshift
  • Correct belt alignment and deflection
  • Keeps CVT cooling and sealing at factory standard
  • Helps your drive belt last longer
  • Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

  • Genuine CFMoto OEM CVT part, part #0GSV-013103-3000
  • Built to CFMoto's original clutch specifications
  • Precision-machined surfaces where applicable
  • Designed for the listed CFMoto CVT systems
  • Works with OEM belts, covers, seals and ducts

Materials and Construction

CFMoto CVT parts use precision-cast or machined aluminum sheaves and housings, hardened steel shafts and rollers, wear-resistant bushings, and heat-stable plastic or composite covers and ducts. Seals and gaskets keep water and dust out of the belt case.

Common Reasons Riders Replace This Part

  • Fixing belt slip, jerky engagement or poor top speed
  • Replacing worn sheaves, rollers, springs or bushings
  • Repairing covers, seals and ducts after water intrusion
  • Routine CVT service and belt replacement

Signs Your CVT Case Wind Guard Needs Replacing

  • Belt slipping, squealing or burning smell
  • Jerky, harsh or delayed engagement
  • Loss of top speed or poor acceleration
  • Glazed belt or frequent belt failures
  • Water or debris inside the CVT cover

Installation Tips

  1. Remove the CVT cover and clean out belt dust before taking anything apart.
  2. Use the correct CFMoto clutch tools. Primary and secondary clutches are under spring tension.
  3. Inspect sheave faces, rollers, bushings and the belt for wear while you are in there.
  4. Assemble to the factory torque specs and check belt deflection and alignment.
  5. Replace cover seals and gaskets, then follow the belt break-in procedure.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

CFMoto Parts Diagrams for This Part

Part #0GSV-013103-3000 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:

Other OEM Parts in This Assembly

Doing the job right? These genuine CFMoto parts are installed alongside the CVT Case Wind Guard and are often replaced at the same time:

Recommended Accessories and Maintenance Supplies

Pair your CVT Case Wind Guard with these parts and supplies:

Helpful Guides from the Witchdoctors Blog

Frequently Asked Questions

What is the OEM part number for this CFMoto CVT Case Wind Guard?

The genuine CFMoto part number is 0GSV-013103-3000. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #0GSV-013103-3000 fit?

It fits the CForce 400 (2022–2023, 2025); CForce 400 S (2024); CForce 500 (2022–2023); CForce 500 S (2024–2025).

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

Should I replace the belt at the same time?

If the belt is glazed, cracked or worn to the minimum width, replace it with the clutch parts so you start fresh.

What causes CVT belts to burn up?

The usual causes are riding in high range at low speed, heavy loads, water in the CVT and worn clutch parts. Use low range for slow, heavy work.

Do I need special tools?

Yes. Most CFMoto clutches need a clutch holder and puller to disassemble safely. Using the wrong tools can damage parts.

Order Your Genuine CFMoto CVT Case Wind Guard Today

Get your CForce 400 or CForce 500 back to factory condition. Add the genuine CFMoto CVT Case Wind Guard (part #0GSV-013103-3000) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

General Safety Warning & Installation Requirements

Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle, or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety of your vehicle.

Important:
Warning: Failure to follow manufacturer-specified installation procedures and safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.

Important Fitment Disclosure

At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.

Verification Required: While we strive for 100% accuracy, vehicle manufacturers often make mid-year production changes. Always verify your specific year, make, and model before finalizing your order.
Read More

Shipping

Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.

All orders over $500 will require a signature.

Please see International Shipping page for orders shipping outside the US.

See our full Shipping Policy page for further details.

Product Availability

We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.

Returns

If your order arrives and it is not right, we will we'll fix it. We promise!

Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Found URLs: