Genuine Can-Am CVT Cooling Duct IN — OEM Part #707002738
Your CVT turns engine power into ground speed, and it depends on precise parts working together. The genuine Can-Am CVT Cooling Duct IN restores factory clutch performance on your Outlander models, built to the weights, angles and tolerances BRP calibrated for smooth engagement and strong backshift.
The drive and driven clutches, belt, covers and cooling ducts work as one system. Worn or mismatched parts cause belt slip, harsh engagement, overheating and early belt failure. This part is confirmed for 45 Can-Am models from 2025 to 2026. See the full fitment list below.
CVT Cooling Duct IN at a Glance
-
OEM part number: 707002738
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: CVT Air Components
-
Fits: Outlander ATV models, 2025–2026
-
Condition: New
Can-Am Models and Years This CVT Cooling Duct IN Fits
Genuine Can-Am part #707002738 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 45 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Can-Am Outlander ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Outlander 4x4 |
2025–2026 |
19 |
| Can-Am Outlander 6x6 |
2026 |
4 |
| Can-Am Outlander 850 |
2025–2026 |
7 |
| Can-Am Outlander 1000R |
2025–2026 |
11 |
| Can-Am Outlander PRO |
2025–2026 |
4 |
Why Choose a Genuine Can-Am OEM CVT Cooling Duct IN?
- Factory calibration for engagement, shift-out and backshift
- Correct belt alignment and deflection
- Keeps CVT cooling and sealing at factory standard
- Helps your drive belt last longer
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM CVT part, part #707002738
- Built to BRP's original clutch specifications
- Precision-machined surfaces where applicable
- Designed for the listed Can-Am CVT systems
- Works with OEM belts, covers, seals and ducts
Materials and Construction
Can-Am CVT parts use precision-machined aluminum sheaves and housings, hardened steel shafts and rollers, wear-resistant bushings, and heat-stable plastic or composite covers and ducts sealed against water and dust.
Common Reasons Riders Replace This Part
- Fixing belt slip, jerky engagement or poor top speed
- Replacing worn sheaves, rollers, springs or bushings
- Repairing covers, seals and ducts after water intrusion
- Routine CVT service and belt replacement
Signs Your CVT Cooling Duct IN Needs Replacing
- Belt slipping, squealing or a burning smell
- Jerky, harsh or delayed engagement
- Loss of top speed or acceleration
- Glazed belt or frequent belt failures
- Water or debris inside the CVT cover
Installation Tips
- Remove the CVT cover and clean out belt dust before taking anything apart.
- Use the correct BRP clutch tools; clutches are under spring tension.
- Inspect sheave faces, rollers, bushings and the belt while you are in there.
- Assemble to factory torque specs and check belt deflection and alignment.
- Replace cover seals and follow the belt break-in procedure.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #707002738 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your CVT Cooling Duct IN with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am CVT Cooling Duct IN?
The genuine Can-Am part number is 707002738. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #707002738 fit?
It fits 45 Can-Am Outlander models from 2025 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Should I replace the belt at the same time?
If the belt is glazed, cracked or worn to minimum width, replace it with the clutch parts.
What causes CVT belts to burn up?
Riding in high range at low speed, heavy loads, water in the CVT and worn clutch parts. Use low range for slow, heavy work.
Do I need special tools?
Yes. Most Can-Am clutches need specific holding and puller tools to service safely.
Order Your Genuine Can-Am CVT Cooling Duct IN Today
Get your Outlander models back to factory condition. Add the genuine Can-Am CVT Cooling Duct IN (part #707002738) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.