An Image of the Genuine Can-Am Logo reading 'GENUINE OEM PART' 707000789
Adaptor by Can-Am 707000789 OEM Hardware 707000789 Off Road Express
Four Can-Am off-road vehicles displayed with the Can-Am logo above them on a white background.
A person in a workshop uses a high-pressure air hose to clean a cvt clutch assembly of a muddy off-road vehicle. The background shows a busy garage environment with another person, tools, and equipment.
An informational infographic titled 'Symptoms of Dirty or Neglected CVT Clutches' with four numbered panels showing gear shift behavior, throttle response, RPM drop under load, and premature belt glazing, alongside a CVT clutch illustration and a car speedometer.
An Image of the Genuine Can-Am Logo reading 'GENUINE OEM PART' 707000789
Adaptor by Can-Am 707000789 OEM Hardware 707000789 Off Road Express
Four Can-Am off-road vehicles displayed with the Can-Am logo above them on a white background.
A person in a workshop uses a high-pressure air hose to clean a cvt clutch assembly of a muddy off-road vehicle. The background shows a busy garage environment with another person, tools, and equipment.
An informational infographic titled 'Symptoms of Dirty or Neglected CVT Clutches' with four numbered panels showing gear shift behavior, throttle response, RPM drop under load, and premature belt glazing, alongside a CVT clutch illustration and a car speedometer.
Badge

CVT Duct Adapter 707000789 by Can-Am

$12.12 USD
Normally Ships in 8-12 Business Days

Inventory:

Loading..
SKU: 707000789
In stock and ready for shipping

SKU: 707000789

Genuine Can-Am CVT Duct Adapter — OEM Part #707000789

Your CVT turns engine power into ground speed, and it depends on precise parts working together. The genuine Can-Am CVT Duct Adapter restores factory clutch performance on your Can-Am ATV or side-by-side, built to the weights, angles and tolerances BRP calibrated for smooth engagement and strong backshift.

The drive and driven clutches, belt, covers and cooling ducts work as one system. Worn or mismatched parts cause belt slip, harsh engagement, overheating and early belt failure. This part is confirmed for 54 Can-Am models from 2011 to 2014. See the full fitment list below.

CVT Duct Adapter at a Glance

  • OEM part number: 707000789
  • Brand: Can-Am by BRP (genuine factory part)
  • Part type: CVT Air Components
  • Fits: Commander crossover side-by-side, Maverick sport side-by-side, Outlander ATV and Renegade sport ATV models, 2011–2014
  • Condition: New

Can-Am Models and Years This CVT Duct Adapter Fits

Genuine Can-Am part #707000789 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

This part is shared across 54 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.

Can-Am Commander crossover side-by-side Fitment

Model Family Model Years Trims
Can-Am Commander 800 2014 1
Can-Am Commander 1000 2012–2014 3

Can-Am Maverick sport side-by-side Fitment

Model Family Model Years Trims
Can-Am Maverick 1000 2013–2014 2

Can-Am Outlander ATV Fitment

Model Family Model Years Trims
Can-Am Outlander 2012 1
Can-Am Outlander 500 2011–2014 6
Can-Am Outlander 650 2011–2014 7
Can-Am Outlander 800R 2011–2014 14
Can-Am Outlander 1000 2013–2014 9
Can-Am Outlander EFI 2012 1
Can-Am Outlander XT 2012 1

Can-Am Renegade sport ATV Fitment

Model Family Model Years Trims
Can-Am Renegade 500 2011–2014 1
Can-Am Renegade 800R 2011–2014 4
Can-Am Renegade 1000 2012–2014 4

Why Choose a Genuine Can-Am OEM CVT Duct Adapter?

  • Factory calibration for engagement, shift-out and backshift
  • Correct belt alignment and deflection
  • Keeps CVT cooling and sealing at factory standard
  • Helps your drive belt last longer
  • Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support

Features and Materials

Key Features

  • Genuine Can-Am OEM CVT part, part #707000789
  • Built to BRP's original clutch specifications
  • Precision-machined surfaces where applicable
  • Designed for the listed Can-Am CVT systems
  • Works with OEM belts, covers, seals and ducts

Materials and Construction

Can-Am CVT parts use precision-machined aluminum sheaves and housings, hardened steel shafts and rollers, wear-resistant bushings, and heat-stable plastic or composite covers and ducts sealed against water and dust.

Common Reasons Riders Replace This Part

  • Fixing belt slip, jerky engagement or poor top speed
  • Replacing worn sheaves, rollers, springs or bushings
  • Repairing covers, seals and ducts after water intrusion
  • Routine CVT service and belt replacement

Signs Your CVT Duct Adapter Needs Replacing

  • Belt slipping, squealing or a burning smell
  • Jerky, harsh or delayed engagement
  • Loss of top speed or acceleration
  • Glazed belt or frequent belt failures
  • Water or debris inside the CVT cover

Installation Tips

  1. Remove the CVT cover and clean out belt dust before taking anything apart.
  2. Use the correct BRP clutch tools; clutches are under spring tension.
  3. Inspect sheave faces, rollers, bushings and the belt while you are in there.
  4. Assemble to factory torque specs and check belt deflection and alignment.
  5. Replace cover seals and follow the belt break-in procedure.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Related OEM Parts for the Same Machines

Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:

Recommended Accessories and Maintenance Supplies

Pair your CVT Duct Adapter with these parts and supplies:

Helpful Guides from the Witchdoctors Blog

Frequently Asked Questions

What is the OEM part number for this Can-Am CVT Duct Adapter?

The genuine Can-Am part number is 707000789. Use it to match this part to your factory parts diagram.

Which Can-Am models does part #707000789 fit?

It fits 54 Can-Am Commander, Maverick, Outlander and Renegade models from 2011 to 2014. The complete list is in the fitment tables above.

Is this a genuine Can-Am part?

Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.

Should I replace the belt at the same time?

If the belt is glazed, cracked or worn to minimum width, replace it with the clutch parts.

What causes CVT belts to burn up?

Riding in high range at low speed, heavy loads, water in the CVT and worn clutch parts. Use low range for slow, heavy work.

Do I need special tools?

Yes. Most Can-Am clutches need specific holding and puller tools to service safely.

Order Your Genuine Can-Am CVT Duct Adapter Today

Get your Can-Am ATV or side-by-side back to factory condition. Add the genuine Can-Am CVT Duct Adapter (part #707000789) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

Where to Ride Your Can-Am

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

General Safety Warning & Installation Requirements

Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle, or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety of your vehicle.

Important:
Warning: Failure to follow manufacturer-specified installation procedures and safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.

Important Fitment Disclosure

At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.

Verification Required: While we strive for 100% accuracy, vehicle manufacturers often make mid-year production changes. Always verify your specific year, make, and model before finalizing your order.
Read More

Shipping

Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.

All orders over $500 will require a signature.

Please see International Shipping page for orders shipping outside the US.

See our full Shipping Policy page for further details.

Product Availability

We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.

Returns

If your order arrives and it is not right, we will we'll fix it. We promise!

Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Found URLs: