Genuine Victory & Polaris Diode 6 Amp — OEM Part #2411035
Restore reliable power and electronics with a genuine Victory & Polaris Diode 6 Amp. Built for the Victory motorcycle, it matches the factory connectors and values, with no splicing.
Harnesses, switches, relays, sensors, the stator, regulator, starter, ECM, gauges and audio all work together. A wrong or weak part causes no-starts, warning lights or dead accessories. Because Victory, Indian and Polaris are all Polaris Inc. brands, this part number is shared across Victory motorcycles and Polaris off-road vehicles. Every model it fits is listed below.
Diode 6 Amp at a Glance
-
OEM part number: 2411035
-
Brand: Victory & Polaris (genuine Polaris-made OEM part)
-
Part type: Resistors & Diodes
-
Victory fitment: Cross Country, Gunner, Judge, Magnum, Vision and X1, 2009–2017
-
Polaris off-road fitment: ACE, Hawkeye, LSV, Outlaw, RZR, Ranger, Scrambler, Sportsman, Trail Blazer and Trail Boss, 2009–2026
-
Condition: New
Models and Years This Diode 6 Amp Fits
Genuine part #2411035 fits the models and years below, across Victory motorcycles and Polaris off-road vehicles. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Victory Motorcycle Fitment
| Model |
Model Years |
| Victory Cross Country |
2016–2017 |
| Victory Cross Country Tour |
2016–2017 |
| Victory Gunner |
2016 |
| Victory Judge |
2016–2017 |
| Victory Magnum |
2016–2017 |
| Victory Vision |
2009, 2011–2017 |
| Victory Vision Tour |
2009–2010 |
| Victory X1 |
2016–2017 |
Polaris Off-Road Vehicle Fitment
431 Polaris model variants share this part, grouped here by model family.
| Model Family |
Model Years |
Variants |
| Polaris ACE |
2016–2021 |
14 |
| Polaris Hawkeye |
2011–2015 |
4 |
| Polaris LSV |
2012 |
1 |
| Polaris Outlaw |
2009–2011, 2022–2025 |
9 |
| Polaris RZR |
2011–2014, 2017–2026 |
129 |
| Polaris Ranger |
2011–2022 |
29 |
| Polaris Scrambler |
2010–2026 |
23 |
| Polaris Sportsman |
2009–2026 |
218 |
| Polaris Trail Blazer |
2010–2013 |
2 |
| Polaris Trail Boss |
2010–2013 |
2 |
Yes, a motorcycle part can fit an ATV or side-by-side: Polaris uses many of the same fasteners, seals, filters and electrical parts across its motorcycle and off-road lines, so this part number also appears in the Polaris off-road parts catalog.
Why Choose a Genuine Victory & Polaris OEM Diode 6 Amp?
- Plug-and-play fit with factory connectors
- Correct electrical ratings
- Weather-sealed for rain and washing
- Works with the factory ECM, gauges and diagnostics
- Sold by Witchdoctors, a Victory and Indian parts specialist since the Victory years
Features and Materials
Key Features
- Genuine Victory & Polaris OEM electrical part, part #2411035
- Original connectors and pin-outs
- Water- and vibration-resistant construction
- Designed for the listed Victory & Polaris models
- No splicing or adapters needed
Materials and Construction
Victory electrical parts use tinned copper wiring, sealed connectors, heat-resistant insulation and potted or sealed housings for modules, sensors and the charging system.
Common Reasons Riders Replace This Part
- Fixing no-start, no-charge or intermittent faults
- Replacing a failed stator or regulator
- Replacing switches, relays or sensors
- Restoring gauges, audio or accessories
Signs Your Diode 6 Amp Needs Replacing
- Battery not charging or dying
- No-start or clicking
- Warning lights or gauge faults
- Melted or corroded connectors
- Switches or audio that do not work
Installation Tips
- Disconnect the negative battery cable first.
- Use the Victory parts and wiring diagrams for routing and connectors.
- Clean corroded terminals and apply dielectric grease where specified.
- Make sure every connector clicks and seals.
- Route wiring away from heat and moving parts, then test.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #2411035 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Diode 6 Amp with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Victory & Polaris Diode 6 Amp?
The genuine part number is 2411035. Use it to match this part to your factory parts diagram.
Which Victory motorcycles does part #2411035 fit?
It fits 8 Victory models (Cross Country, Gunner, Judge, Magnum, Vision and X1) from 2009 to 2017. See the Victory fitment table above.
Does part #2411035 fit Indian motorcycles?
Not according to the factory fitment data we have. If you ride an Indian, contact us with your VIN and we will find the right part.
Does it fit Polaris ATVs or side-by-sides?
Yes. The same part number is used on 431 Polaris off-road models, including the ACE, Hawkeye, LSV, Outlaw, RZR, Ranger, Scrambler, Sportsman, Trail Blazer and Trail Boss. See the Polaris table above.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Victory and Polaris models, not an aftermarket copy.
How do I know if my stator is bad?
Low charging voltage at the battery with the engine running is a common sign. Test before replacing.
Will this need programming?
Most plug-in parts do not. Some modules may need dealer setup.
Why does my battery keep dying?
Check the charging system, connections and any parasitic drain before replacing the battery.
Order Your Genuine Victory & Polaris Diode 6 Amp Today
Victory parts get harder to find every year. Order the genuine Victory & Polaris Diode 6 Amp, OEM part #2411035, from Witchdoctors today and keep your Victory motorcycle or Polaris off-road vehicle running the way it was built.
Where to Ride Your Victory
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.