Genuine CFMoto Door Handle, Outside Right — OEM Part #5SY0-374350-6000
Rattles, leaks and doors that will not latch take the fun out of every ride. The genuine CFMoto Door Handle, Outside Right restores the factory fit of the cab on your UForce 1000, so doors close cleanly, seals stay tight and everything lines up the way it did when the machine was new.
Cab components keep riders protected and the cockpit sealed against dust, water and wind. A worn or damaged piece can cause rattles, leaks and safety problems. This part is confirmed for 2 CFMoto models from 2024. See the full fitment list below.
Door Handle, Outside Right at a Glance
-
OEM part number: 5SY0-374350-6000
-
Brand: CFMOTO (genuine factory part)
-
Part type: Door Handle
-
Position: Right
-
Fits: UForce utility UTV models, 2024
-
Condition: New
CFMoto Models and Years This Door Handle, Outside Right Fits
Genuine CFMoto part #5SY0-374350-6000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto UForce utility UTV Fitment
| Model |
Model Years |
| CFMoto UForce 1000 |
2024 |
| CFMoto UForce 1000 XL |
2024 |
Why Choose a Genuine CFMoto OEM Door Handle, Outside Right?
- Factory fit with the cab frame, doors and roof
- Helps keep dust, water and wind out of the cockpit
- Restores proper door, window and latch operation
- Maintains the structural integrity CFMoto designed into the cab
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM cab part, part #5SY0-374350-6000
- Built to original CFMoto dimensions and mounting points
- Works with factory seals, hinges, latches and hardware
- Matches the original finish for a clean, factory look
- Designed for the vibration and flex of off-road use
Materials and Construction
CFMoto cab components use materials matched to the job: powder-coated or e-coated steel for frame and structural parts, UV-stabilized plastics for trim and door panels, and weather-resistant rubber for seals and channels. Each is chosen to survive vibration, moisture and sun.
Common Reasons Riders Replace This Part
- Repairing a cab after a rollover or impact
- Fixing doors that rattle, sag or will not stay latched
- Sealing out dust and water on a cab-enclosed machine
- Restoring a machine to factory condition for resale
Signs Your Door Handle, Outside Right Needs Replacing
- Doors or windows that rattle, sag or will not close
- Water or dust getting into the cab
- Bent, cracked or broken cab pieces after an impact
- Seals that are torn, flattened or hardened
- Corrosion or broken welds on frame components
Installation Tips
- Pull up the CFMoto parts diagram for the cab to see how the part fits and which hardware it uses.
- Support doors, glass or the roof before loosening any hardware so nothing drops.
- Clean mounting surfaces and check surrounding parts for damage.
- Install the new part with all bolts finger-tight, check alignment and door gaps, then tighten to spec.
- Test doors, latches and windows, and check for leaks with a light water spray.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #5SY0-374350-6000 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Door Handle, Outside Right and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Door Handle, Outside Right with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Door Handle, Outside Right?
The genuine CFMoto part number is 5SY0-374350-6000. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #5SY0-374350-6000 fit?
It fits the UForce 1000 (2024); UForce 1000 XL (2024).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Will this part fit a cab with aftermarket doors or windows?
It is designed for the factory CFMoto cab on the listed models. Aftermarket doors, roofs and glass may use different mounting points, so check with the accessory maker before ordering.
Do I need special tools to install cab parts?
Most cab parts install with common hand tools. Large panels, doors and glass are much easier with a second person to hold them in place.
Is the cab frame safe to repair after a rollover?
Bent or cracked structural parts should be replaced, not straightened. If you are unsure, have the cab inspected before riding again.
Order Your Genuine CFMoto Door Handle, Outside Right Today
Get your UForce 1000 back to factory condition. Add the genuine CFMoto Door Handle, Outside Right (part #5SY0-374350-6000) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.