Genuine CFMoto Driver Seat — OEM Part #5BWV-131000-5000
Ride safer and more comfortably with a genuine CFMoto Driver Seat. Made for the ZForce 800 or ZForce 950, this OEM part matches the factory mounts and works with the original seat, belt and cab systems.
Seats, belts, nets and their mounts keep riders in position over rough ground. Worn or damaged parts reduce comfort and, more importantly, protection. This part is confirmed for 3 CFMoto models from 2023 to 2025. See the full fitment list below.
Driver Seat at a Glance
-
OEM part number: 5BWV-131000-5000
-
Brand: CFMOTO (genuine factory part)
-
Part type: Front Seat
-
Fits: ZForce sport UTV models, 2023–2025
-
Condition: New
CFMoto Models and Years This Driver Seat Fits
Genuine CFMoto part #5BWV-131000-5000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto ZForce sport UTV Fitment
| Model |
Model Years |
| CFMoto ZForce 800 Trail |
2023–2025 |
| CFMoto ZForce 950 Sport |
2023–2025 |
| CFMoto ZForce 950 Trail |
2023–2025 |
Why Choose a Genuine CFMoto OEM Driver Seat?
- Factory fit with the original seat base, frame and mounts
- Restores CFMoto's designed rider support and restraint
- Weather-resistant materials made for outdoor use
- Keeps safety systems working as intended
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM part, part #5BWV-131000-5000
- Matches the original mounting points and hardware
- UV- and water-resistant covers and webbing (where applicable)
- Designed for the listed CFMoto models
- Works with factory seat latches, belts and interlocks
Materials and Construction
CFMoto seating parts use UV-resistant marine-grade vinyl, closed-cell foam that resists water absorption, and steel or plastic seat bases. Safety belts use high-strength polyester webbing with steel latch hardware built to factory specification.
Common Reasons Riders Replace This Part
- Replacing torn or worn seat covers and cushions
- Replacing frayed, cut or sun-damaged belts
- Fixing loose or broken seat mounts and latches
- Restoring a machine for resale or a new owner
Signs Your Driver Seat Needs Replacing
- Torn vinyl or waterlogged foam
- Seat belt webbing that is frayed, cut or faded
- Belts that do not retract or latch properly
- Seats that rock, slide or will not lock in place
- Broken nets, buckles or mounts
Installation Tips
- Use the CFMoto parts diagram to identify mounting hardware and any seat-belt interlock wiring.
- Remove the old part, noting how belts and wiring are routed.
- Install the new part with the correct factory hardware.
- Torque seat-belt anchor bolts to spec; never substitute hardware on restraint anchors.
- Test latches, retractors and interlocks before riding.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #5BWV-131000-5000 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Driver Seat and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Driver Seat with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Driver Seat?
The genuine CFMoto part number is 5BWV-131000-5000. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #5BWV-131000-5000 fit?
It fits the ZForce 800 Trail (2023–2025); ZForce 950 Sport (2023–2025); ZForce 950 Trail (2023–2025).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Should seat belts be replaced after an accident?
Yes. Belts that have restrained a rider in a crash or rollover can be stretched or damaged internally and should be replaced.
Will this fit an aftermarket seat?
It is designed for the factory CFMoto seat and mounts on the listed models. Aftermarket seats may need their own brackets.
How do I keep vinyl seats from cracking?
Keep them clean and use a UV protectant made for vinyl. Covering the machine when parked outside also helps a lot.
Order Your Genuine CFMoto Driver Seat Today
Ride with confidence on parts built for your machine. Order the genuine CFMoto Driver Seat, OEM part #5BWV-131000-5000, from Witchdoctors today and keep your ZForce 800 or ZForce 950 running the way CFMoto designed it.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.