EBC Sintered "HH" Brake Pads FA209/2HH
Stop with confidence using the EBC Sintered "HH" Brake Pads FA209/2HH.
Brake pads turn your lever or pedal into stopping power. They wear with every stop, and mud, sand and water wear them faster. Running pads too thin damages rotors and makes braking unsafe.
At a Glance
-
Brand: EBC Brakes
-
Part number: FA209/2HH
-
Product type: Brake Pads
-
Compound: Sintered "HH"
About the Sintered "HH" Compound
This set uses EBC's Sintered "HH" compound: fully sintered street pads with EBC's highest "HH" friction rating for strong, consistent stopping.
EBC Pad Compounds Compared
EBC makes several friction compounds so you can match the pad to how and where you ride:
-
SV Severe Duty Sintered: high-density sintered copper built for utility work, mud and the most abrasive conditions, with the longest life of the off-road range.
-
Long-Life Sintered "R": sintered pads for performance trail riding and racing, with strong durability and resistance to mud, water and sand.
-
Sport Carbon "X": a cooler-running carbon compound for leisure trail riding that reduces heat transfer to the caliper and brake fluid.
-
Sintered "HH": fully sintered street pads with EBC's highest "HH" friction rating for strong, consistent stopping.
-
Semi-Sintered "V": a semi-sintered compound that blends sintered bite with smooth, quiet operation.
-
Organic "FA": an organic compound that is quiet, smooth and gentle on rotors for everyday riding.
-
SXR Side-by-Side Sintered: sintered pads developed for side-by-sides that see hard, high-speed use.
-
MXS Race Sintered: sintered race pads for motocross and off-road competition.
-
Extreme Pro Sintered: sintered pads for aggressive street, track and performance riding.
How to Choose
-
Mud, sand and utility work: SV or R sintered pads last longest in abrasive conditions.
-
Relaxed trail riding: Sport Carbon "X" runs cooler and is easy on rotors.
-
Street riding: HH sintered or Extreme Pro pads give strong, consistent stopping; organic FA pads are quiet and smooth.
-
Side-by-side performance: SXR pads are made for fast, heavy machines.
How to Bed In New Pads
New pads need a short break-in so they transfer an even layer of friction material to the rotor. Find a safe, open area and make 8 to 10 moderate stops from about 30 mph down to 5 mph without locking the wheels, then ride a few minutes without braking to let everything cool. Avoid hard stops for the first 100 miles. Proper bedding gives stronger, quieter, more consistent braking for the life of the pads.
Signs It's Time to Replace
- Grinding or squealing
- Pads near or below 2 mm of friction material
- Longer stopping distances
- Vibration or uneven wear
Fitment
EBC part numbers are application-specific. Match FA209/2HH to your year, make, model and position in EBC's application guide, or contact us with your year, make and model and we will confirm fit.
Why Choose EBC?
- Strong, consistent stopping power
- Compound matched to how you ride
- Direct-fit replacement
- Trusted EBC quality
EBC Brakes is one of the world's best-known brake brands, with pads, shoes, rotors and clutch parts for motorcycles, ATVs and UTVs. Witchdoctors stocks EBC for Victory and Indian motorcycles and for popular off-road machines.
Common Uses
- Routine brake service
- Mud, sand and wet riding
- Heavy loads, towing or two-up riding
- Performance and trail riding
Installation Overview
- Check the fitment and position (front or rear) for your machine.
- Remove the caliper or pad pins following your service manual.
- Push the pistons back slowly, watching the fluid level in the reservoir.
- Install the new pads and any shims or clips, then reinstall the caliper and torque to spec.
- Pump the brakes until firm, then bed in the new pads.
Brakes are safety parts. Follow your service manual, and if you are unsure, read when to seek professional help or DIY or have a qualified technician install them.
Tips from the Witchdoctors Garage
- Clean the caliper before installing pads.
- Never get brake fluid on the pads.
- Check the fluid level after pushing the pistons back.
- Inspect pads after every muddy ride.
Complete the Job
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the EBC part number?
The part number is FA209/2HH. EBC parts are listed by application, so use it to confirm fit.
Is this genuine EBC?
Yes. Witchdoctors sells genuine EBC Brakes products.
Which EBC compound should I choose?
See the compound guide above. Sintered pads suit mud and heavy use; carbon and organic pads suit lighter use.
Are pads sold in pairs?
Most EBC pad sets cover one caliper. Check how many calipers your machine has on that axle.
Do I need new rotors?
Replace rotors that are below minimum thickness, warped or deeply grooved.
How fast does Witchdoctors ship?
See how long it will take to receive your order for current timing.
Order Today
Ride with confidence. Order the EBC Sintered "HH" Brake Pads FA209/2HH from Witchdoctors today.
Where to Ride Off-Road
Ready to put it to work? These off-road parks welcome ATVs and UTVs. Check current rules, road conditions and permit requirements before you go.