Genuine Can-Am Exhaust Pipe Clamp — OEM Part #293650228
Keep heat and noise where they belong with a genuine Can-Am Exhaust Pipe Clamp. Built for the Can-Am ATV or side-by-side, it bolts to the original mounts so the exhaust stays sealed, quiet and clear of plastics, wiring and riders.
The exhaust routes hot gas away from the engine, controls noise and keeps heat away from panels, wiring and riders. Loose shields and leaks lead to melted parts and failed inspections. This part is confirmed for 303 Can-Am models from 2015 to 2026. See the full fitment list below.
Exhaust Pipe Clamp at a Glance
-
OEM part number: 293650228
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: OEM Exhaust Mounts & Components
-
Fits: Defender utility side-by-side, Maverick sport side-by-side, Outlander ATV, Renegade sport ATV and Traxter utility side-by-side models, 2015–2026
-
Condition: New
Can-Am Models and Years This Exhaust Pipe Clamp Fits
Genuine Can-Am part #293650228 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 303 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Can-Am Defender utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Defender |
2016–2017 |
2 |
| Can-Am Defender 6x6 |
2020, 2022–2023, 2026 |
4 |
| Can-Am Defender 800 |
2016 |
1 |
| Can-Am Defender 1000 |
2016 |
1 |
| Can-Am Defender HD5 |
2017–2021 |
2 |
| Can-Am Defender HD8 |
2017–2021 |
7 |
| Can-Am Defender HD9 |
2022–2026 |
9 |
| Can-Am Defender HD10 |
2017–2026 |
39 |
| Can-Am Defender Lone |
2018 |
1 |
| Can-Am Defender PRO |
2020–2026 |
6 |
| Can-Am Defender T |
2017 |
1 |
Can-Am Maverick sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Maverick Sport |
2019–2022 |
4 |
| Can-Am Maverick Trail |
2018–2023, 2025–2026 |
12 |
Can-Am Outlander ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Outlander 4x4 |
2018 |
21 |
| Can-Am Outlander 6x6 |
2018–2020, 2022–2023, 2025 |
12 |
| Can-Am Outlander 450 |
2018–2020, 2022–2025 |
17 |
| Can-Am Outlander 570 |
2018–2020, 2022–2023 |
25 |
| Can-Am Outlander 650 |
2018–2020 |
19 |
| Can-Am Outlander 850 |
2018–2020 |
15 |
| Can-Am Outlander 1000 |
2019–2020 |
1 |
| Can-Am Outlander 1000R |
2018–2020 |
17 |
| Can-Am Outlander EFI |
2019–2020 |
3 |
| Can-Am Outlander L |
2015–2017 |
8 |
| Can-Am Outlander PRO |
2018 |
5 |
Can-Am Renegade sport ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Renegade 4x4 |
2018 |
6 |
| Can-Am Renegade 570 |
2018–2020 |
4 |
| Can-Am Renegade 650 |
2019–2020 |
2 |
| Can-Am Renegade 850 |
2018–2020 |
3 |
| Can-Am Renegade 1000R |
2018–2020 |
6 |
| Can-Am Renegade EFI |
2019–2020 |
1 |
Can-Am Traxter utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Traxter |
2017 |
1 |
| Can-Am Traxter 6x6 |
2022–2026 |
1 |
| Can-Am Traxter HD5 |
2017–2021 |
2 |
| Can-Am Traxter HD8 |
2016–2021 |
6 |
| Can-Am Traxter HD9 |
2022–2026 |
8 |
| Can-Am Traxter HD10 |
2018–2025 |
15 |
| Can-Am Traxter PRO |
2021–2026 |
7 |
| Can-Am Traxter T |
2017–2018, 2020–2022 |
9 |
Why Choose a Genuine Can-Am OEM Exhaust Pipe Clamp?
- Factory fit and clearances
- Keeps noise at factory levels for trail rules
- Protects plastics, wiring and riders from heat
- Uses the original hangers, gaskets and hardware
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM exhaust part, part #293650228
- Original mounting points and pipe routing
- High-temperature materials and finishes
- Designed for the listed Can-Am engines
- Pairs with OEM gaskets and hardware on the same diagram
Materials and Construction
Can-Am exhaust parts are heat-resistant steel or stainless steel. Heat shields use stamped steel, aluminum or insulated layers, and gaskets use graphite or multi-layer steel to seal at high temperature.
Common Reasons Riders Replace This Part
- Fixing rattles from loose or broken heat shields
- Repairing exhaust leaks at joints
- Replacing a damaged muffler or spark arrestor
- Meeting trail noise and spark arrestor rules
Signs Your Exhaust Pipe Clamp Needs Replacing
- Rattling or buzzing from the exhaust area
- Ticking or puffing from a leak
- Melted or discolored plastics near the exhaust
- Soot around joints and gaskets
- A damaged, clogged or missing spark arrestor
Installation Tips
- Let the exhaust cool completely.
- Spray hardware with penetrating oil, since exhaust bolts often seize.
- Replace gaskets at every joint you open.
- Fit with hardware loose, align for clearance, then tighten to spec.
- Run the engine and check for leaks, rattles and clearance to plastics.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #293650228 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Exhaust Pipe Clamp with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Exhaust Pipe Clamp?
The genuine Can-Am part number is 293650228. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #293650228 fit?
It fits 303 Can-Am Defender, Maverick, Outlander, Renegade and Traxter models from 2015 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Do I need a spark arrestor?
Most public trails require a working, approved spark arrestor. Check local rules.
Will an aftermarket exhaust add horsepower?
Sometimes a little, but often mostly noise, and it may need a tune. OEM keeps factory noise and performance.
Should I reuse exhaust gaskets?
No. They crush when tightened and rarely reseal.
Order Your Genuine Can-Am Exhaust Pipe Clamp Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Exhaust Pipe Clamp, OEM part #293650228, from Witchdoctors today and keep your Can-Am ATV or side-by-side running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.