Badge

External Retaining Ring 3234318 by Polaris

Price
$3.99 USD
Normally Ships in 5-7 Business Days

Inventory:

Loading..
SKU: 3234318
In stock and ready for shipping

SKU: 3234318

Genuine Polaris External Retaining Ring — OEM Part #3234318

Put power to the ground reliably with a genuine Polaris External Retaining Ring. Built for the Polaris ATV or side-by-side, it matches the original splines, bearings and housings, so it works with your transmission and On-Demand AWD front gearcase where equipped.

The transmission, shift mechanism, gearcases and drive shafts carry the full torque of the engine. Worn or mismatched parts cause noise, hard shifting and expensive failures. This part is confirmed for 288 Polaris models from 2006 to 2026. See the full fitment list below.

External Retaining Ring at a Glance

  • OEM part number: 3234318
  • Brand: Polaris (genuine factory part)
  • Part type: Gearcase Assembly
  • Fits: ACE single-seat, General crossover side-by-side, Hawkeye ATV, RZR sport side-by-side, Ranger utility side-by-side, Scrambler ATV and Sportsman ATV models, 2006–2026
  • Condition: New

Polaris Models and Years This External Retaining Ring Fits

Genuine Polaris part #3234318 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

This part is shared across 288 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.

Polaris ACE single-seat Fitment

Model Family Model Years Trims
Polaris ACE 325 2016 1
Polaris ACE 500 2017–2019 1
Polaris ACE 570 2016–2019 8
Polaris ACE 900 2016–2019 2

Polaris General crossover side-by-side Fitment

Model Family Model Years Trims
Polaris General 1000 2016–2019 13

Polaris Hawkeye ATV Fitment

Model Family Model Years Trims
Polaris Hawkeye 2006–2007 1
Polaris Hawkeye 2x4 2008, 2011 1
Polaris Hawkeye 300 2009–2010 1

Polaris RZR sport side-by-side Fitment

Model Family Model Years Trims
Polaris RZR 570 2012–2020 6
Polaris RZR 900 2014–2019 16
Polaris RZR 1000 2016, 2018–2019 5
Polaris RZR S 2017–2020 7
Polaris RZR Trail 2021–2022 3
Polaris RZR XP 2011–2019 14
Polaris RZR Xp4 2019 1

Polaris Ranger utility side-by-side Fitment

Model Family Model Years Trims
Polaris Ranger 2015, 2019 2
Polaris Ranger 6P 2017 1
Polaris Ranger 500 2017–2019 5
Polaris Ranger 570 2014–2019 22
Polaris Ranger 900 2011–2019 13
Polaris Ranger 902 2019 1
Polaris Ranger 1000 2015–2018 9
Polaris Ranger Diesel 2011–2018 7
Polaris Ranger ETX 2015–2016 1
Polaris Ranger Hst 2015–2017 1
Polaris Ranger Intl 2018 1
Polaris Ranger MD 2018 1
Polaris Ranger Northstar 2018–2019 3
Polaris Ranger XP 2013–2019 30

Polaris Scrambler ATV Fitment

Model Family Model Years Trims
Polaris Scrambler 850 2013–2026 6
Polaris Scrambler 1000 2014–2019, 2022–2026 6
Polaris Scrambler HO 2013 1
Polaris Scrambler XP 2014–2018, 2020–2021, 2026 7

Polaris Sportsman ATV Fitment

Model Family Model Years Trims
Polaris Sportsman 2015 2
Polaris Sportsman 48" 2020 1
Polaris Sportsman 300 2008–2010 1
Polaris Sportsman 400 2008–2010 1
Polaris Sportsman 550 2010–2014 3
Polaris Sportsman 850 2014–2026 15
Polaris Sportsman 1000 2015–2019, 2023–2026 7
Polaris Sportsman ACE 2014–2015 8
Polaris Sportsman Forest 2011–2012 2
Polaris Sportsman Touring 2010–2026 16
Polaris Sportsman X2 2010–2014 4
Polaris Sportsman XP 2009–2026 31

Why Choose a Genuine Polaris OEM External Retaining Ring?

  • Exact gear, spline and bearing fit
  • Restores smooth, positive shifting and range selection
  • Designed for full engine torque and load
  • Lowers the risk of repeat failures
  • Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support

Features and Materials

Key Features

  • Genuine Polaris OEM drivetrain part, part #3234318
  • Machined to Polaris's original specifications
  • Hardened surfaces where applicable
  • Matches factory seals, bearings and mounting
  • Designed for the listed Polaris models

Materials and Construction

Polaris drivetrain parts use heat-treated alloy steel for gears, shafts, forks and splines, sealed bearings, and aluminum or cast housings, with oil- and weather-resistant seals and boots.

Common Reasons Riders Replace This Part

  • Fixing grinding, popping out of gear or hard shifting
  • Rebuilding transmissions, gearcases and differentials
  • Fixing AWD/4WD engagement problems
  • Repairing leaks and vibration from drive shafts and U-joints

Signs Your External Retaining Ring Needs Replacing

  • Grinding, clunking or whining
  • Popping out of gear or trouble selecting range
  • Vibration that grows with speed
  • Oil leaks at seals, covers or gearcases
  • AWD that will not engage or release

Installation Tips

  1. Drain transmission or gearcase fluid before disassembly.
  2. Follow the Polaris service manual for shimming, preload and torque specs.
  3. Replace seals, O-rings and gaskets you disturb.
  4. Lubricate gears and bearings with the specified fluid during assembly.
  5. Refill with the correct fluid and amount, then test-ride and check for leaks.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Polaris Parts Diagrams for Your Machine

Find part #3234318 and every part installed with it in the factory Polaris parts diagrams for your model:

Related OEM Parts for the Same Machines

Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:

Recommended Accessories and Maintenance Supplies

Pair your External Retaining Ring with these parts and supplies:

Helpful Guides from the Witchdoctors Blog

Frequently Asked Questions

What is the OEM part number for this Polaris External Retaining Ring?

The genuine Polaris part number is 3234318. Use it to match this part to your factory parts diagram.

Which Polaris models does part #3234318 fit?

It fits 288 Polaris ACE, General, Hawkeye, RZR, Ranger, Scrambler and Sportsman models from 2006 to 2026. The complete list is in the fitment tables above.

Is this a genuine Polaris part?

Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.

What fluid should I use?

Use the transmission and gearcase fluids in your Polaris owner's manual. The wrong fluid can cause wear and engagement problems.

Should I replace bearings and seals during a rebuild?

Yes. They are inexpensive compared to labor.

Can a bad drivetrain part damage other components?

Yes. Worn parts shed metal into the fluid and damage gears and bearings. Repair problems early.

Order Your Genuine Polaris External Retaining Ring Today

Ride with confidence on parts built for your machine. Order the genuine Polaris External Retaining Ring, OEM part #3234318, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.

Where to Ride Your Polaris

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

General Safety Warning & Installation Requirements

Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle, or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety of your vehicle.

Important:
Warning: Failure to follow manufacturer-specified installation procedures and safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.

Important Fitment Disclosure

At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.

Verification Required: While we strive for 100% accuracy, vehicle manufacturers often make mid-year production changes. Always verify your specific year, make, and model before finalizing your order.
Read More

Shipping

Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.

All orders over $500 will require a signature.

Please see International Shipping page for orders shipping outside the US.

See our full Shipping Policy page for further details.

Product Availability

We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.

Returns

If your order arrives and it is not right, we will we'll fix it. We promise!

Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Found URLs: