Flanged Bolt 6X16 by Kawasaki

Kawasaki UTV/ATV & Side by Side Handlebar Mounts & Clamps - Available at buywitchdoctors.com

Product Specifications: Genuine OEM Kawasaki Flanged Bolt 6X16, Part # 92154-Y232.

Keep your machine running like new with a genuine Kawasaki Handlebar Mounts & Clamps paired with premium maintenance parts from buywitchdoctors.com.

When you are out tearing up the trails or working hard on the job site, your control setup demands absolute structural rigidity and solid steering feedback to perform at its peak. This factory-original steering post component is designed specifically for your vehicle, ensuring a perfect cockpit alignment and superior clamping torque that aftermarket options simply cannot guarantee.

Why Choose a Genuine Kawasaki OEM Handlebar Mounts & Clamps?

Your Kawasaki handlebar layout is a precision-engineered control hub. Off-brand universal mounts or generic aluminum clamps often use lower-grade cast alloys or incorrect thread pitches that can strip out under high-stress conditions, slip out of alignment during hard trail landings, or snap during an unexpected tip-over. By choosing an original equipment manufacturer (OEM) replacement, you protect your investment, maintain your factory warranty, and ensure rugged clamping hold, proper bar centering, and dependable steering response across severe off-road environments.

Premium Materials and Engine Protection

• High-Density Media: Advanced high-tensile forged aluminum or structural steel alloys engineered to absorb intense front-end trail impacts without bending or cracking.
• Exact Fit Polyurethane Seals: Features factory-matched inner diameters and splined tolerances that wrap perfectly flush around your bars to completely eliminate loose rotational play.
• Heavy-Duty Construction: Built to endure continuous extreme chassis vibration, high torque fastening pressures, and the rugged, wet environments your vehicle encounters.
• Maximum Airflow Efficiency: Engineered precisely to align with your stock steering stem geometry, keeping your control center streamlined and keeping vital control cables clear from binding.

Comprehensive Model Fitment (2015-Current)

This genuine OEM part is engineered for a wide range of Kawasaki side-by-side (SxS) and all-terrain vehicles (ATV) built from 2015 to the current model year. Please verify your series matches below:

Utility Task Vehicles (UTVs / Side-by-Sides)

• Mule Series: SX, 4000, 4010, PRO-MX, PRO-FX, PRO FXT, PRO-DX, PRO DXT, PRO FXR
• Teryx & Teryx4 Series: KRX 1000, KRX4 1000, H2, Teryx5 H2
• Ridge & Ridge XR Series:

All-Terrain Vehicles (ATVs)

• KFX Series: 50, 90
• Brute Force Series: 300, 450, 750 4x4i

⚠️ IMPORTANT DISCLAIMER: Always check your owner’s manual or the fitment tab on witchdoctors.com to make sure this part fits your specific year, make, and model before ordering.

Other Popular Parts and Accessories

• Hand Guard: Reinforced high-impact plastic armor shields engineered to deflect jagged rocks, thick flying mud, and low-hanging tree branches away from your knuckles.
• Handlebar Mitts: Insulated, weather-resistant thermal fabric enclosure gauntlets built to wrap around your grips for ultimate freezing-weather hand warmth.
• Handlebar Ends: Weighted anti-vibration bar end caps and protective caps designed to shield your outer grip corners from tip-over scrapes.
• Handlebar Pads & Covers: Premium impact-absorbing foam protective pads and custom-molded vinyl wraps designed to provide critical protection over steering clamps.

Frequently Asked Questions (FAQs)

What are the primary signs that my Kawasaki handlebar clamps or mounts are failing?
The most common indicator is a handlebar that visibly slips or rotates out of place when you pull hard on the grips or land from a bump. You should also inspect the assembly for fine stress fractures along the aluminum casting base or check for stripped internal thread paths that prevent the mounting bolts from torque-locking properly.

Do these OEM mounts come with new rubber isolation bushings installed?
This depends entirely on the specific factory part number configuration for your model. While some genuine Kawasaki lower handlebar mounts include integrated, pre-pressed rubber isolation dampening blocks to suppress trail buzz, other models utilize bare aluminum pieces. Review our factory diagram tabs to confirm your package inclusions.

PRO TIP: Learn More about Kawasaki OEM vs. Aftermarket Parts

PRO TIP: Learn How to Inspect ATV Handlebar Safety.

PRO TIP: Learn more with the Buyer's Guide to ATV Handlebar Grips & Hand Guards.

PRO TIP: Learn more with Ultimate Guide to Fix a Sticking UTV or ATV Throttle Control.

Upgrade Your Ride's Protection Today

Don't let a loose steering clamp, stripped mounting bolt, or cracked aluminum bracket compromise your vehicle handling and overall control safety on rough terrain. Keep your handlebar infrastructure tracking locked with maximum factory reliability on every single venture. Order your genuine Kawasaki UTV/ATV OEM Handlebar Mounts & Clamps today from Witchdoctors.com and enjoy fast shipping straight to your door!

Are You Looking to Find Great Places & Adventurous Trails to Ride Your UTV, Side by Side or ATV? Check out these highly recommended places:

• Mines & Meadows
• Mountain Ridge ATV Park
• Busco Beach ATV/ UTV Park
• Indian Mountain ATV/UTV Park
• Wildcat Offroad Park