Victory Fuel Tank O-Ring WD-5412071

Genuine Victory Fuel Tank O-Ring — OEM Part #WD-5412071

Hard starts, surging and fuel smell usually trace back to the fuel system. The genuine Victory Fuel Tank O-Ring restores factory fuel delivery on your Victory motorcycle, matching the original fittings, seals and electrical connectors.

The fuel tank, pump, regulator, lines, throttle body, intake and air cleaner deliver clean air and fuel in the right ratio. One leak or weak part shows up as poor running. This part is confirmed for 8 Victory models from 1999 to 2008.

Fuel Tank O-Ring at a Glance

• OEM part number: WD-5412071
• Brand: Victory (genuine Polaris-made OEM part)
• Part type: Fuel Tank Seal
• Victory fitment: Hammer, Jackpot, Kingpin, V92 and Vegas, 1999–2008
• Condition: New

Models and Years This Fuel Tank O-Ring Fits

Genuine part #WD-5412071 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Victory Motorcycle Fitment

Why Choose a Genuine Victory OEM Fuel Tank O-Ring?

• Factory fit with tank, lines and connectors
• Maintains the fuel pressure the EFI is calibrated for
• Fuel- and ethanol-resistant seals
• Sealed intake for correct air-fuel ratio
• Sold by Witchdoctors, a Victory and Indian parts specialist since the Victory years

Features and Materials

Key Features

• Genuine Victory OEM fuel or intake part, part #WD-5412071
• Original fittings, seals and connectors
• Built for gasoline and ethanol blends
• Designed for the listed Victory models
• Works with factory EFI and sensors

Materials and Construction

Victory fuel and intake parts use ethanol-resistant hose and O-rings, steel or plastic tank components, precision pump and injector parts, and sealed intake boots and air filter media.

Common Reasons Riders Replace This Part

• Fixing hard starting, stalling or surging
• Repairing fuel leaks or fuel smell
• Replacing a failed fuel pump or regulator
• Replacing air filters and intake seals

Signs Your Fuel Tank O-Ring Needs Replacing

• Long cranking or hard starts
• Surging, hesitation or stalling
• Fuel smell or wet spots
• Whine or no prime from the fuel pump
• Dirty air filter or cracked intake boot

Installation Tips

1. Work in a ventilated area away from sparks and relieve fuel pressure first.
2. Disconnect the battery before working on the pump or wiring.
3. Use the Victory parts diagram for O-rings, clamps and routing.
4. Install with fresh seals and secure every clamp and connector.
5. Turn the key to prime, check for leaks, then start.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Parts Diagrams for Your Bike

Find part #WD-5412071 and every part installed with it in the factory parts diagrams for your model:

• 2008 Victory Hammer parts diagrams
• 2008 Victory Jackpot parts diagrams
• 2008 Victory Kingpin parts diagrams
• 2008 Victory Vegas parts diagrams

Related OEM Parts for the Same Bikes

Doing the job right? These genuine parts fit the same models and are often replaced at the same time:

• Victory Throttle Body Boot Rebuild Kit (#1203866-REBUILD)
• Victory Throttle Body Seal (#5412882)
• Victory Throttle Body Boot Adapter (#1203866)
• Victory Air Filter Victory Steel Frame 08-17 (#5813074)
• Victory Gas Tank Bolt Cover Right Side (#5412415)
• Victory Gas Tank Bolt Cover Left Side (#5412414)

Recommended Accessories and Maintenance Supplies

Pair your Fuel Tank O-Ring with these parts and supplies:

• Victory fuel pumps — Fuel pumps and parts
• Fuel tanks and mounts — Tanks, mounts and straps
• Air filters and air cleaners — Filters and intakes
• Fuel stabilizers and cleaners — Protect fuel during storage
• Victory OEM parts diagrams — find every factory part for your bike

Helpful Guides from the Witchdoctors Blog

• Victory Motorcycle Fuel Pump Issues: Symptoms and Diagnosis
• Spring Tune-Up for Your Victory or Indian Motorcycle: Get Ready to Rid
• How to Store a Motorcycle for Winter: Essential Tips and Steps
• Victory OEM Parts vs Aftermarket Parts: Which Is Right?

Frequently Asked Questions

What is the OEM part number for this Victory Fuel Tank O-Ring?

The genuine part number is WD-5412071. Use it to match this part to your factory parts diagram.

Which Victory motorcycles does part #WD-5412071 fit?

It fits 8 Victory models (Hammer, Jackpot, Kingpin, V92 and Vegas) from 1999 to 2008. See the Victory fitment table above.

Does part #WD-5412071 fit Indian motorcycles?

Not according to the factory fitment data we have. If you ride an Indian, contact us with your VIN and we will find the right part.

Is this a genuine OEM part?

Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Victory models, not an aftermarket copy.

How do I know the fuel pump is failing?

Hard starts, surging under load and a missing prime whine are common signs. Our blog has a full diagnosis guide.

Should I replace the fuel tank seal when the pump is out?

Yes. A new seal is cheap insurance against leaks.

Does ethanol fuel hurt my bike?

Ethanol attracts moisture during storage. Use stabilizer and follow your manual for fuel.

Order Your Genuine Victory Fuel Tank O-Ring Today

Keep your Victory motorcycle on the road. Add the genuine Victory Fuel Tank O-Ring (part #WD-5412071) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Victory OEM parts

Where to Ride Your Victory

Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.

• Natchez Trace Parkway — Mississippi, Alabama & Tennessee: 444 miles with no commercial trucks
• Blue Ridge Parkway — Virginia & North Carolina: 469 miles of mountain curves with no commercial traffic