Genuine Polaris Shift Knob Gear Selector — OEM Part #5414569
Put power to the ground reliably with a genuine Polaris Shift Knob Gear Selector. Built for the Polaris ATV or side-by-side, it matches the original splines, bearings and housings, so it works with your transmission and On-Demand AWD front gearcase where equipped.
The transmission, shift mechanism, gearcases and drive shafts carry the full torque of the engine. Worn or mismatched parts cause noise, hard shifting and expensive failures. This part is confirmed for 302 Polaris models from 2014 to 2026. See the full fitment list below.
Shift Knob Gear Selector at a Glance
-
OEM part number: 5414569
-
Brand: Polaris (genuine factory part)
-
Part type: Gear Shift Components
-
Fits: ACE single-seat, Farmhand utility vehicle, Hawkeye ATV, other Polaris, RZR sport side-by-side, Ranger utility side-by-side and Sportsman ATV models, 2014–2026
-
Condition: New
Polaris Models and Years This Shift Knob Gear Selector Fits
Genuine Polaris part #5414569 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 302 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris ACE single-seat Fitment
| Model Family |
Model Years |
Trims |
| Polaris ACE 325 |
2016 |
1 |
| Polaris ACE 500 |
2017–2019 |
1 |
| Polaris ACE 570 |
2016–2019 |
8 |
| Polaris ACE 900 |
2016–2019 |
2 |
Polaris Farmhand utility vehicle Fitment
| Model Family |
Model Years |
Trims |
| Polaris Farmhand HD |
2017 |
1 |
Polaris Hawkeye ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Hawkeye 325 |
2015 |
1 |
Polaris other Polaris Fitment
| Model Family |
Model Years |
Trims |
| Polaris Polaris |
2015 |
1 |
Polaris RZR sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris RZR 64 |
2021 |
1 |
| Polaris RZR 570 |
2019–2020 |
2 |
| Polaris RZR 900 |
2018–2026 |
10 |
| Polaris RZR 1000 |
2018–2021 |
4 |
| Polaris RZR RS1 |
2019–2022 |
3 |
| Polaris RZR S |
2020 |
1 |
| Polaris RZR S4 |
2020 |
1 |
| Polaris RZR Trail |
2020–2026 |
8 |
| Polaris RZR Turbo |
2019–2021 |
6 |
| Polaris RZR XP |
2018–2023 |
24 |
| Polaris RZR Xp4 |
2019 |
2 |
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger |
2015 |
1 |
| Polaris Ranger 6P |
2017 |
1 |
| Polaris Ranger 500 |
2017–2022 |
7 |
| Polaris Ranger 570 |
2015–2025 |
21 |
| Polaris Ranger 900 |
2014–2019 |
6 |
| Polaris Ranger 1000 |
2015–2018 |
6 |
| Polaris Ranger ETX |
2015–2016 |
1 |
| Polaris Ranger MD |
2018 |
1 |
| Polaris Ranger XP |
2014, 2017–2018 |
4 |
Polaris Sportsman ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Sportsman |
2015–2016 |
5 |
| Polaris Sportsman 48" |
2020 |
1 |
| Polaris Sportsman 450 |
2016–2026 |
11 |
| Polaris Sportsman 570 |
2014–2026 |
84 |
| Polaris Sportsman 850 |
2015–2026 |
14 |
| Polaris Sportsman 1000 |
2015–2019, 2023–2026 |
7 |
| Polaris Sportsman ACE |
2015 |
6 |
| Polaris Sportsman EFI |
2016–2017 |
1 |
| Polaris Sportsman ETX |
2015 |
2 |
| Polaris Sportsman Touring |
2014–2026 |
23 |
| Polaris Sportsman X2 |
2019 |
1 |
| Polaris Sportsman XP |
2015–2026 |
22 |
Why Choose a Genuine Polaris OEM Shift Knob Gear Selector?
- Exact gear, spline and bearing fit
- Restores smooth, positive shifting and range selection
- Designed for full engine torque and load
- Lowers the risk of repeat failures
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM drivetrain part, part #5414569
- Machined to Polaris's original specifications
- Hardened surfaces where applicable
- Matches factory seals, bearings and mounting
- Designed for the listed Polaris models
Materials and Construction
Polaris drivetrain parts use heat-treated alloy steel for gears, shafts, forks and splines, sealed bearings, and aluminum or cast housings, with oil- and weather-resistant seals and boots.
Common Reasons Riders Replace This Part
- Fixing grinding, popping out of gear or hard shifting
- Rebuilding transmissions, gearcases and differentials
- Fixing AWD/4WD engagement problems
- Repairing leaks and vibration from drive shafts and U-joints
Signs Your Shift Knob Gear Selector Needs Replacing
- Grinding, clunking or whining
- Popping out of gear or trouble selecting range
- Vibration that grows with speed
- Oil leaks at seals, covers or gearcases
- AWD that will not engage or release
Installation Tips
- Drain transmission or gearcase fluid before disassembly.
- Follow the Polaris service manual for shimming, preload and torque specs.
- Replace seals, O-rings and gaskets you disturb.
- Lubricate gears and bearings with the specified fluid during assembly.
- Refill with the correct fluid and amount, then test-ride and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #5414569 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Shift Knob Gear Selector with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Shift Knob Gear Selector?
The genuine Polaris part number is 5414569. Use it to match this part to your factory parts diagram.
Which Polaris models does part #5414569 fit?
It fits 302 Polaris ACE, Farmhand, Hawkeye, RZR, Ranger and Sportsman models from 2014 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
What fluid should I use?
Use the transmission and gearcase fluids in your Polaris owner's manual. The wrong fluid can cause wear and engagement problems.
Should I replace bearings and seals during a rebuild?
Yes. They are inexpensive compared to labor.
Can a bad drivetrain part damage other components?
Yes. Worn parts shed metal into the fluid and damage gears and bearings. Repair problems early.
Order Your Genuine Polaris Shift Knob Gear Selector Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Shift Knob Gear Selector, OEM part #5414569, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.