Genuine CFMoto Gear Shift Spring — OEM Part #9AWV-321002-8000
Grinding gears, popping out of range and vibration all point to the drivetrain. The genuine CFMoto Gear Shift Spring restores factory shifting and power delivery on your CForce 800 or CForce 1000, built to the exact dimensions of the original so it meshes and mounts correctly.
The transmission, shift mechanism, differentials and drive shafts carry the full torque of the engine. Worn or mismatched parts lead to noise, hard shifting and expensive failures. This part is confirmed for 3 CFMoto models from 2024 to 2025. See the full fitment list below.
Gear Shift Spring at a Glance
-
OEM part number: 9AWV-321002-8000
-
Brand: CFMOTO (genuine factory part)
-
Part type: Gear Shift Components
-
Fits: CForce ATV models, 2024–2025
-
Condition: New
CFMoto Models and Years This Gear Shift Spring Fits
Genuine CFMoto part #9AWV-321002-8000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto CForce ATV Fitment
| Model |
Model Years |
| CFMoto CForce 800 Touring |
2024–2025 |
| CFMoto CForce 1000 Overland |
2025 |
| CFMoto CForce 1000 Touring |
2024–2025 |
Why Choose a Genuine CFMoto OEM Gear Shift Spring?
- Exact gear, spline and bearing fit
- Restores smooth, positive shifting and range selection
- Designed for full engine torque and load
- Lowers the risk of repeat failures from a poor-fitting part
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM drivetrain part, part #9AWV-321002-8000
- Machined to original CFMoto specifications
- Hardened surfaces for wear resistance where applicable
- Matches factory seals, bearings and mounting
- Designed for the listed CFMoto models
Materials and Construction
CFMoto drivetrain parts use heat-treated alloy steel for gears, shafts, shift forks and splines, sealed bearings, and aluminum or cast housings. Seals and boots are made from oil- and weather-resistant elastomers.
Common Reasons Riders Replace This Part
- Fixing grinding, popping out of gear or hard shifting
- Rebuilding transmissions, gearcases and differentials
- Fixing 4WD engagement problems
- Repairing leaks and vibration from drive shafts and U-joints
Signs Your Gear Shift Spring Needs Replacing
- Grinding, clunking or whining noises
- Popping out of gear or difficulty selecting range
- Vibration that increases with speed
- Oil leaks at seals, covers or the differential
- 4WD that will not engage or disengage
Installation Tips
- Drain the transmission or differential fluid before disassembly.
- Follow the CFMoto service manual. Many drivetrain jobs need exact shimming, preload and torque specs.
- Replace seals, O-rings and gaskets you disturb.
- Lubricate gears and bearings with the specified fluid during assembly.
- Refill with the correct fluid type and amount, then test-ride and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #9AWV-321002-8000 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Gear Shift Spring and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Gear Shift Spring with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Gear Shift Spring?
The genuine CFMoto part number is 9AWV-321002-8000. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #9AWV-321002-8000 fit?
It fits the CForce 800 Touring (2024–2025); CForce 1000 Overland (2025); CForce 1000 Touring (2024–2025).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
What fluid should I use after the repair?
Use the transmission and differential fluids listed in your CFMoto owner's manual. The wrong fluid can cause wear and engagement problems.
Should I replace bearings and seals during a rebuild?
Yes. Bearings and seals are inexpensive compared to labor. Replace them while the unit is apart.
Can a bad drivetrain part damage other components?
Yes. A worn part can send metal debris through the fluid and damage gears and bearings. Repair problems early.
Order Your Genuine CFMoto Gear Shift Spring Today
Get your CForce 800 or CForce 1000 back to factory condition. Add the genuine CFMoto Gear Shift Spring (part #9AWV-321002-8000) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.