Genuine Polaris Gearcase Assembly — OEM Part #1333603
Grinding gears, popping out of range and vibration all point to the drivetrain. The genuine Polaris Gearcase Assembly restores factory shifting and power delivery on your General 1000, built to the exact dimensions of the original so it meshes and mounts correctly.
The transmission, shift mechanism, gearcases and drive shafts carry the full torque of the engine. Worn or mismatched parts cause noise, hard shifting and expensive failures. This part is confirmed for 4 Polaris models from 2017 to 2018. See the full fitment list below.
Gearcase Assembly at a Glance
-
OEM part number: 1333603
-
Brand: Polaris (genuine factory part)
-
Part type: Gearcase Assembly
-
Fits: General crossover side-by-side models, 2017–2018
-
Condition: New
Polaris Models and Years This Gearcase Assembly Fits
Genuine Polaris part #1333603 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris General crossover side-by-side Fitment
| Model |
Model Years |
| Polaris General 4 1000 |
2017 |
| Polaris General 4 1000 EPS |
2017–2018 |
| Polaris General 1000 4 EPS |
2017–2018 |
| Polaris General 1000 4 MD (International) |
2017–2018 |
Why Choose a Genuine Polaris OEM Gearcase Assembly?
- Exact gear, spline and bearing fit
- Restores smooth, positive shifting and range selection
- Designed for full engine torque and load
- Lowers the risk of repeat failures
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM drivetrain part, part #1333603
- Machined to Polaris's original specifications
- Hardened surfaces where applicable
- Matches factory seals, bearings and mounting
- Designed for the listed Polaris models
Materials and Construction
Polaris drivetrain parts use heat-treated alloy steel for gears, shafts, forks and splines, sealed bearings, and aluminum or cast housings, with oil- and weather-resistant seals and boots.
Common Reasons Riders Replace This Part
- Fixing grinding, popping out of gear or hard shifting
- Rebuilding transmissions, gearcases and differentials
- Fixing AWD/4WD engagement problems
- Repairing leaks and vibration from drive shafts and U-joints
Signs Your Gearcase Assembly Needs Replacing
- Grinding, clunking or whining
- Popping out of gear or trouble selecting range
- Vibration that grows with speed
- Oil leaks at seals, covers or gearcases
- AWD that will not engage or release
Installation Tips
- Drain transmission or gearcase fluid before disassembly.
- Follow the Polaris service manual for shimming, preload and torque specs.
- Replace seals, O-rings and gaskets you disturb.
- Lubricate gears and bearings with the specified fluid during assembly.
- Refill with the correct fluid and amount, then test-ride and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #1333603 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Gearcase Assembly with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Gearcase Assembly?
The genuine Polaris part number is 1333603. Use it to match this part to your factory parts diagram.
Which Polaris models does part #1333603 fit?
It fits the General 4 1000 (2017); General 4 1000 EPS (2017–2018); General 1000 4 EPS (2017–2018); General 1000 4 MD (International) (2017–2018).
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
What fluid should I use?
Use the transmission and gearcase fluids in your Polaris owner's manual. The wrong fluid can cause wear and engagement problems.
Should I replace bearings and seals during a rebuild?
Yes. They are inexpensive compared to labor.
Can a bad drivetrain part damage other components?
Yes. Worn parts shed metal into the fluid and damage gears and bearings. Repair problems early.
Order Your Genuine Polaris Gearcase Assembly Today
Get your General 1000 back to factory condition. Add the genuine Polaris Gearcase Assembly (part #1333603) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.