Genuine Can-Am Grease Fitting — OEM Part #250000315
Worn suspension parts turn a smooth ride into a punishing one and make handling unpredictable. The genuine Can-Am Grease Fitting restores the factory geometry, travel and ride quality of your Can-Am ATV or side-by-side.
A-arms, trailing arms, shocks, springs, sway bars, knuckles and bushings control wheel movement and alignment. Bent or worn parts cause wandering, uneven tire wear and harsh handling. This part is confirmed for 301 Can-Am models from 2010 to 2026. See the full fitment list below.
Grease Fitting at a Glance
-
OEM part number: 250000315
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Suspension Repair
-
Fits: DS youth and sport ATV, Outlander ATV and Renegade sport ATV models, 2010–2026
-
Condition: New
Can-Am Models and Years This Grease Fitting Fits
Genuine Can-Am part #250000315 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 301 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Can-Am DS youth and sport ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am DS 450 |
2010–2015 |
5 |
Can-Am Outlander ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Outlander |
2012 |
1 |
| Can-Am Outlander 4x4 |
2018 |
21 |
| Can-Am Outlander 6x6 |
2014, 2018–2023, 2025 |
26 |
| Can-Am Outlander 450 |
2018–2025 |
17 |
| Can-Am Outlander 500 |
2013–2015 |
6 |
| Can-Am Outlander 570 |
2017–2023 |
27 |
| Can-Am Outlander 650 |
2013–2025 |
31 |
| Can-Am Outlander 800R |
2012–2015 |
12 |
| Can-Am Outlander 850 |
2017–2024 |
30 |
| Can-Am Outlander 1000 |
2013–2020 |
14 |
| Can-Am Outlander 1000R |
2017–2024 |
29 |
| Can-Am Outlander EFI |
2012, 2015, 2020–2024 |
16 |
| Can-Am Outlander Intl |
2021 |
1 |
| Can-Am Outlander L |
2015–2017 |
8 |
| Can-Am Outlander PRO |
2017–2018 |
6 |
| Can-Am Outlander XT |
2012 |
1 |
Can-Am Renegade sport ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Renegade |
2016–2017 |
1 |
| Can-Am Renegade 4x4 |
2018, 2025–2026 |
12 |
| Can-Am Renegade 500 |
2013–2015 |
1 |
| Can-Am Renegade 570 |
2018–2022 |
4 |
| Can-Am Renegade 650 |
2020–2026 |
6 |
| Can-Am Renegade 800R |
2012–2015 |
4 |
| Can-Am Renegade 850 |
2018–2022 |
4 |
| Can-Am Renegade 1000 |
2012–2015 |
4 |
| Can-Am Renegade 1000R |
2018–2026 |
12 |
| Can-Am Renegade EFI |
2019–2023 |
2 |
Why Choose a Genuine Can-Am OEM Grease Fitting?
- Factory geometry for straight tracking
- Correct bushing and ball joint fit
- Restores original ride height and travel
- Spreads loads across the frame as BRP designed
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM suspension part, part #250000315
- Original mounting points and dimensions
- Corrosion-resistant coating where applicable
- Built for full-travel off-road use
- Works with factory bushings, ball joints and hardware
Materials and Construction
Can-Am suspension parts use high-strength steel for arms, knuckles and links with corrosion-resistant coatings, rubber or polymer bushings, and shocks with steel bodies, chromed shafts and oil or nitrogen damping.
Common Reasons Riders Replace This Part
- Replacing bent arms, knuckles or links after an impact
- Fixing clunks and wandering from worn bushings
- Restoring ride height and damping
- Rebuilding the suspension on a high-hour machine
Signs Your Grease Fitting Needs Replacing
- Clunking or knocking over bumps
- Wandering, pulling or loose handling
- Uneven or rapid tire wear
- Visible bends, cracks or leaking shocks
- Play in ball joints or bushings
Installation Tips
- Support the machine safely with the suspension unloaded.
- Check the Can-Am parts diagram for bushings, ball joints and hardware.
- Remove the damaged part and inspect the frame mounts.
- Install, tightening pivot bolts at ride height if the manual specifies.
- Torque all hardware, set toe, and recheck after the first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #250000315 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Grease Fitting with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Grease Fitting?
The genuine Can-Am part number is 250000315. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #250000315 fit?
It fits 301 Can-Am DS, Outlander and Renegade models from 2010 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Do I need an alignment after replacing suspension parts?
Yes, check and set toe after installation.
Should I replace both sides?
For wear items like bushings and shocks, replace in pairs to keep handling balanced.
Is OEM better than aftermarket suspension?
OEM restores factory ride and geometry. Aftermarket arms may add strength or travel but often change geometry.
Order Your Genuine Can-Am Grease Fitting Today
Get your Can-Am ATV or side-by-side back to factory condition. Add the genuine Can-Am Grease Fitting (part #250000315) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.