Badge

Insert Half Hex Body M6x1.0 250100199 by Can-Am

Price
$3.29 USD
Normally Ships in 8-12 Business Days

Inventory:

Loading..
SKU: 250100199
In stock and ready for shipping

SKU: 250100199

Genuine Can-Am Insert Half Hex Body M6x1.0 — OEM Part #250100199

Off-road engines live and die by clean air. The genuine Can-Am Insert Half Hex Body M6x1.0 seals the intake on your Can-Am ATV or side-by-side exactly as the factory intended, keeping dust, water and grit out of the throttle body and cylinders.

The intake path, from inlet to airbox to throttle body, has to stay sealed. One cracked boot or warped lid can let in enough dust to wear out an engine fast. This part is confirmed for 579 Can-Am models from 2010 to 2026. See the full fitment list below.

Insert Half Hex Body M6x1.0 at a Glance

  • OEM part number: 250100199
  • Brand: Can-Am by BRP (genuine factory part)
  • Part type: Airbox Components
  • Fits: Commander crossover side-by-side, DS youth and sport ATV, Defender utility side-by-side, Maverick sport side-by-side, Outlander ATV, Renegade sport ATV and Traxter utility side-by-side models, 2010–2026
  • Condition: New

Can-Am Models and Years This Insert Half Hex Body M6x1.0 Fits

Genuine Can-Am part #250100199 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

This part is shared across 579 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.

Can-Am Commander crossover side-by-side Fitment

Model Family Model Years Trims
Can-Am Commander 700 2022–2026 8
Can-Am Commander 800R 2019–2020 2
Can-Am Commander 1000R 2019–2020, 2022–2026 10

Can-Am DS youth and sport ATV Fitment

Model Family Model Years Trims
Can-Am DS 450 2010–2015 5

Can-Am Defender utility side-by-side Fitment

Model Family Model Years Trims
Can-Am Defender 6x6 2020, 2022–2023, 2026 4
Can-Am Defender HD5 2018–2020 1
Can-Am Defender HD7 2022–2026 5
Can-Am Defender HD8 2018–2021 3
Can-Am Defender HD9 2022–2026 9
Can-Am Defender HD10 2018–2026 28
Can-Am Defender HD11 2026 11
Can-Am Defender Lone 2018 1
Can-Am Defender PRO 2020–2026 5

Can-Am Maverick sport side-by-side Fitment

Model Family Model Years Trims
Can-Am Maverick 2018 2
Can-Am Maverick R 2024–2026 12
Can-Am Maverick Sport 2019–2026 18
Can-Am Maverick Trail 2018, 2020, 2022–2023, 2025–2026 12
Can-Am Maverick Turbo 2019–2026 56
Can-Am Maverick X3 2018 5

Can-Am Outlander ATV Fitment

Model Family Model Years Trims
Can-Am Outlander 2012 1
Can-Am Outlander 4x4 2018, 2025–2026 40
Can-Am Outlander 6x6 2014, 2018–2023, 2025–2026 32
Can-Am Outlander 450 2018–2025 17
Can-Am Outlander 500 2013–2015 6
Can-Am Outlander 570 2016–2023 27
Can-Am Outlander 650 2013–2025 31
Can-Am Outlander 700 2026 1
Can-Am Outlander 800R 2012–2015 12
Can-Am Outlander 850 2016–2026 37
Can-Am Outlander 1000 2013–2020 14
Can-Am Outlander 1000R 2016–2026 34
Can-Am Outlander EFI 2012, 2015, 2020–2024 16
Can-Am Outlander Ev 2026 2
Can-Am Outlander Intl 2021 1
Can-Am Outlander L 2015–2017 8
Can-Am Outlander PRO 2016–2018, 2025–2026 10
Can-Am Outlander XT 2012 1

Can-Am Renegade sport ATV Fitment

Model Family Model Years Trims
Can-Am Renegade 2016–2017 1
Can-Am Renegade 4x4 2018, 2025–2026 12
Can-Am Renegade 500 2013–2015 1
Can-Am Renegade 570 2018–2022 4
Can-Am Renegade 650 2020–2026 6
Can-Am Renegade 800R 2012–2015 4
Can-Am Renegade 850 2018–2022 4
Can-Am Renegade 1000 2012–2015 4
Can-Am Renegade 1000R 2018–2026 12
Can-Am Renegade EFI 2019–2023 2

Can-Am Traxter utility side-by-side Fitment

Model Family Model Years Trims
Can-Am Traxter 6x6 2022–2026 1
Can-Am Traxter HD5 2018 1
Can-Am Traxter HD7 2023–2026 4
Can-Am Traxter HD8 2018–2021 4
Can-Am Traxter HD9 2022–2026 6
Can-Am Traxter HD10 2018, 2020–2025 9
Can-Am Traxter HD11 2026 3
Can-Am Traxter PRO 2021–2026 4
Can-Am Traxter T 2018, 2020–2022 10

Why Choose a Genuine Can-Am OEM Insert Half Hex Body M6x1.0?

  • Factory seal against dust, water and debris
  • Correct airflow for the factory fuel and ignition mapping
  • Direct fit with original clamps, ducts and mounts
  • Helps prevent premature engine wear
  • Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support

Features and Materials

Key Features

  • Genuine Can-Am OEM intake part, part #250100199
  • Molded to original airbox and duct dimensions
  • Heat- and fuel-vapor-resistant materials
  • Designed for dusty, muddy and wet riding
  • Works with factory air filters and sensors

Materials and Construction

Can-Am intake parts use rigid, heat-stable plastics for airbox housings and lids, flexible rubber or TPE boots and ducts that seal under vibration, and filter media designed to trap fine dust while keeping airflow.

Common Reasons Riders Replace This Part

  • Replacing a cracked airbox, lid or intake boot
  • Restoring the seal after water or mud intrusion
  • Routine filter and wear-item replacement
  • Fixing idle and performance problems from an air leak

Signs Your Insert Half Hex Body M6x1.0 Needs Replacing

  • Dust on the clean side of the air filter
  • Cracks or splits in boots, ducts or the airbox
  • Rough idle, hesitation or a lean condition
  • Whistling or sucking noises from the intake
  • Water in the airbox after a crossing

Installation Tips

  1. Check the Can-Am parts diagram for clamps, seals and duct routing.
  2. Remove the old part and clean dust from the airbox and throttle body inlet.
  3. Install the new part, making sure every edge seals.
  4. Tighten clamps evenly without overtightening plastic fittings.
  5. Start the engine and check for air leaks and a smooth idle.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Can-Am Parts Diagrams for Your Machine

Find part #250100199 and every part installed with it in the factory Can-Am parts diagrams for your model:

Related OEM Parts for the Same Machines

Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:

Recommended Accessories and Maintenance Supplies

Pair your Insert Half Hex Body M6x1.0 with these parts and supplies:

Helpful Guides from the Witchdoctors Blog

Frequently Asked Questions

What is the OEM part number for this Can-Am Insert Half Hex Body M6x1.0?

The genuine Can-Am part number is 250100199. Use it to match this part to your factory parts diagram.

Which Can-Am models does part #250100199 fit?

It fits 579 Can-Am Commander, DS, Defender, Maverick, Outlander, Renegade and Traxter models from 2010 to 2026. The complete list is in the fitment tables above.

Is this a genuine Can-Am part?

Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.

How often should I check my air filter?

After every dusty ride if possible, and replace it at the interval in your operator's guide or sooner.

Can an intake leak damage my engine?

Yes. Unfiltered air carries fine dust that wears pistons, rings and cylinders quickly.

Will this change performance?

It restores factory airflow and sealing. If you had a leak, expect a smoother idle and better response.

Order Your Genuine Can-Am Insert Half Hex Body M6x1.0 Today

Get your Can-Am ATV or side-by-side back to factory condition. Add the genuine Can-Am Insert Half Hex Body M6x1.0 (part #250100199) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

Where to Ride Your Can-Am

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

General Safety Warning & Installation Requirements

Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle, or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety of your vehicle.

Important:
Warning: Failure to follow manufacturer-specified installation procedures and safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.

Important Fitment Disclosure

At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.

Verification Required: While we strive for 100% accuracy, vehicle manufacturers often make mid-year production changes. Always verify your specific year, make, and model before finalizing your order.
Read More

Shipping

Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.

All orders over $500 will require a signature.

Please see International Shipping page for orders shipping outside the US.

See our full Shipping Policy page for further details.

Product Availability

We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.

Returns

If your order arrives and it is not right, we will we'll fix it. We promise!

Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Found URLs: