Genuine Can-Am Insert M5x0.8 — OEM Part #293450268
When you are inside the engine, there is no room for guesswork. The genuine Can-Am Insert M5x0.8 is built to the exact tolerances of the original part in your Can-Am ATV or side-by-side, so it fits the mating parts correctly and keeps the Rotax engine running the way BRP designed it.
Engine internals and castings work under heat, pressure and constant vibration. A part that is even slightly off can cause oil leaks, low compression, noise or major engine damage. This part is confirmed for 47 Can-Am models from 2010 to 2019. See the full fitment list below.
Insert M5x0.8 at a Glance
-
OEM part number: 293450268
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Engine Mount
-
Fits: DS youth and sport ATV, Maverick sport side-by-side and Outlander ATV models, 2010–2019
-
Condition: New
Can-Am Models and Years This Insert M5x0.8 Fits
Genuine Can-Am part #293450268 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 47 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Can-Am DS youth and sport ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am DS 450 |
2010–2015 |
5 |
Can-Am Maverick sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Maverick |
2017 |
1 |
| Can-Am Maverick 1000R |
2016 |
2 |
| Can-Am Maverick Turbo |
2019 |
4 |
| Can-Am Maverick X3 |
2017–2018 |
19 |
Can-Am Outlander ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Outlander 500 |
2014 |
3 |
| Can-Am Outlander 650 |
2014 |
4 |
| Can-Am Outlander 800R |
2014 |
4 |
| Can-Am Outlander 1000 |
2014 |
5 |
Why Choose a Genuine Can-Am OEM Insert M5x0.8?
- Factory tolerances for correct clearances and fit
- Designed to work with the other OEM parts in the Rotax engine
- Helps protect any applicable BRP warranty coverage
- Lowers the risk of a repeat teardown from a poor-fitting part
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM engine part, part #293450268
- Machined to BRP's original specifications
- Matches factory sealing surfaces and mounting points
- Made for the heat and loads of the listed engines
- Pairs with the gaskets and seals on the same parts diagram
Materials and Construction
Rotax engine parts use materials chosen for their location: aluminum alloy castings for cases, cylinders and covers; hardened, heat-treated steel for shafts, gears and valvetrain parts; and multi-layer or composite gaskets with elastomer oil seals.
Common Reasons Riders Replace This Part
- Full or partial engine rebuilds
- Repairs after overheating or oil starvation
- Fixing oil leaks at cases, covers and seals
- Restoring compression and power on a high-hour engine
Signs Your Insert M5x0.8 Needs Replacing
- Oil leaks around covers, cases or seals
- Ticking, knocking or rattling from the engine
- Low compression or noticeable power loss
- Blue or white smoke, or high oil use
- Metal debris in the oil or on the drain plug magnet
Installation Tips
- Follow the BRP service manual for your model; engine work needs exact procedures and torque specs.
- Clean all mating surfaces and replace any gaskets and seals you disturb.
- Measure critical clearances with proper tools before final assembly.
- Lubricate moving parts with clean engine oil or assembly lube as specified.
- Torque fasteners in sequence, refill fluids and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #293450268 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Insert M5x0.8 with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Insert M5x0.8?
The genuine Can-Am part number is 293450268. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #293450268 fit?
It fits 47 Can-Am DS, Maverick and Outlander models from 2010 to 2019. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Should I replace gaskets and seals at the same time?
Yes. Replace any gasket or seal you disturb. They are on the same Can-Am parts diagram.
Is OEM worth it over aftermarket engine parts?
For internals, OEM parts match the exact clearances the Rotax engine was designed around, which helps avoid noise, wear and leaks.
Can I do this repair myself?
Experienced home mechanics can do many engine repairs with the service manual and the right tools. Precision internal work is best left to a qualified technician if you are not set up for it.
Order Your Genuine Can-Am Insert M5x0.8 Today
Get your Can-Am ATV or side-by-side back to factory condition. Add the genuine Can-Am Insert M5x0.8 (part #293450268) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.
-
Hollister Hills SVRA — Hollister, California: a state vehicular recreation area with designated ATV and 4x4 areas
-
Hatfield-McCoy Trails — southern West Virginia: multiple permit-access trail systems across the coalfields