Genuine Polaris Winch Handle — OEM Part #2205265
A winch you cannot trust is worse than no winch. The genuine Polaris Winch Handle restores the factory winch system on your Polaris ATV or side-by-side, matching the original mounts, wiring and controls.
Winch mounts, motors, contactors, controls and wiring carry very high loads and current. Every part has to be up to the job. This part is confirmed for 188 Polaris models from 2014 to 2026. See the full fitment list below.
Winch Handle at a Glance
-
OEM part number: 2205265
-
Brand: Polaris (genuine factory part)
-
Part type: Winch Accessory
-
Fits: General crossover side-by-side, RZR sport side-by-side, Ranger utility side-by-side and Sportsman ATV models, 2014–2026
-
Condition: New
Polaris Models and Years This Winch Handle Fits
Genuine Polaris part #2205265 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 188 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris General crossover side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris General 1000 |
2016–2023 |
29 |
| Polaris General XP |
2020–2026 |
25 |
Polaris RZR sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris RZR XP |
2022 |
2 |
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger 570 |
2023–2026 |
2 |
| Polaris Ranger 900 |
2015–2016 |
1 |
| Polaris Ranger 1000 |
2020–2026 |
24 |
| Polaris Ranger Back |
2020 |
2 |
| Polaris Ranger FC |
2020 |
2 |
| Polaris Ranger Northstar |
2020 |
9 |
| Polaris Ranger RC |
2020 |
2 |
| Polaris Ranger Texas |
2020 |
1 |
| Polaris Ranger Tx |
2020 |
1 |
| Polaris Ranger Winter |
2020 |
2 |
| Polaris Ranger XP |
2014–2017, 2020–2024 |
41 |
Polaris Sportsman ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Sportsman |
2015 |
1 |
| Polaris Sportsman 550 |
2014 |
1 |
| Polaris Sportsman 570 |
2019–2020, 2025–2026 |
10 |
| Polaris Sportsman 800 |
2014 |
2 |
| Polaris Sportsman 850 |
2021–2026 |
5 |
| Polaris Sportsman 1000 |
2016–2019, 2025–2026 |
4 |
| Polaris Sportsman Forest |
2014 |
3 |
| Polaris Sportsman Touring |
2014, 2022–2026 |
7 |
| Polaris Sportsman XP |
2014, 2019–2026 |
12 |
Why Choose a Genuine Polaris OEM Winch Handle?
- Factory fit with Polaris winch mounts and wiring
- Correct electrical ratings for the winch circuit
- Weather-sealed for mud and water
- Restores dependable recovery
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM winch part, part #2205265
- Original mounts, connectors and controls
- Designed for high-current loads
- Corrosion-resistant construction
- Fits the listed Polaris models
Materials and Construction
Polaris winch parts use high-strength steel mounts and fairleads, heavy-gauge copper power cable with sealed terminals, and sealed switches and contactors.
Common Reasons Riders Replace This Part
- Repairing a winch that clicks but will not pull
- Replacing damaged rope, fairleads or mounts
- Fixing broken switches or wiring
- Restoring a factory winch on a used machine
Signs Your Winch Handle Needs Replacing
- Winch clicks but does not turn
- Intermittent operation
- Frayed rope or a damaged fairlead
- Corroded or loose power terminals
- Bent or cracked mount
Installation Tips
- Disconnect the battery first.
- Use the Polaris parts diagram for routing, terminals and mount hardware.
- Clean terminals and use the correct cable size.
- Torque mounting hardware and secure wiring away from heat.
- Test in both directions under light load.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #2205265 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Winch Handle with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Winch Handle?
The genuine Polaris part number is 2205265. Use it to match this part to your factory parts diagram.
Which Polaris models does part #2205265 fit?
It fits 188 Polaris General, RZR, Ranger and Sportsman models from 2014 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Why does my winch just click?
Usually a weak battery, corroded connection or failing contactor. Test those first.
Can I use synthetic rope?
Usually yes, with a hawse fairlead instead of a roller fairlead.
Is the winch mount model-specific?
Yes. Use the fitment table to confirm.
About Availability of Part #2205265
This part is marked as no longer available. It may have been replaced by a newer part number. Contact our customer service team with your VIN and we will help you find the current replacement, or read more about parts that are no longer available.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.