Genuine Can-Am King Seal Clamp — OEM Part #293650271
Off-road engines live and die by clean air. The genuine Can-Am King Seal Clamp seals the intake on your Maverick Turbo or Maverick X3 exactly as the factory intended, keeping dust, water and grit out of the throttle body and cylinders.
The intake path, from inlet to airbox to throttle body, has to stay sealed. One cracked boot or warped lid can let in enough dust to wear out an engine fast. This part is confirmed for 21 Can-Am models from 2018 to 2019. See the full fitment list below.
King Seal Clamp at a Glance
-
OEM part number: 293650271
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Airbox Components
-
Fits: Maverick sport side-by-side models, 2018–2019
-
Condition: New
Can-Am Models and Years This King Seal Clamp Fits
Genuine Can-Am part #293650271 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Maverick sport side-by-side Fitment
| Model |
Model Years |
| Can-Am Maverick MAX Turbo |
2019 |
| Can-Am Maverick MAX Turbo R |
2019 |
| Can-Am Maverick Turbo |
2019 |
| Can-Am Maverick Turbo R |
2019 |
| Can-Am Maverick X3 900 HO |
2018 |
| Can-Am Maverick X3 MAX Turbo |
2018 |
| Can-Am Maverick X3 MAX Turbo R |
2018 |
| Can-Am Maverick X3 MAX Turbo R X ds |
2018 |
| Can-Am Maverick X3 MAX Turbo R X rs |
2018 |
| Can-Am Maverick X3 MAX Turbo R X rs DPS With Smart Lok |
2018 |
| Can-Am Maverick X3 MAX Turbo R X rs Smart lok |
2018 |
| Can-Am Maverick X3 Turbo |
2018 |
| Can-Am Maverick X3 Turbo R |
2018 |
| Can-Am Maverick X3 Turbo R X ds |
2018 |
| Can-Am Maverick X3 Turbo R X mr |
2018 |
| Can-Am Maverick X3 Turbo R X rc |
2018 |
| Can-Am Maverick X3 Turbo R X rs |
2018 |
| Can-Am Maverick X3 Turbo R X rs DPS With Smart Lok |
2018 |
| Can-Am Maverick X3 Turbo R X rs Smart lok |
2018 |
| Can-Am Maverick X3 Turbo X mr |
2018 |
| Can-Am Maverick X3 Turbo X rc |
2018 |
Why Choose a Genuine Can-Am OEM King Seal Clamp?
- Factory seal against dust, water and debris
- Correct airflow for the factory fuel and ignition mapping
- Direct fit with original clamps, ducts and mounts
- Helps prevent premature engine wear
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM intake part, part #293650271
- Molded to original airbox and duct dimensions
- Heat- and fuel-vapor-resistant materials
- Designed for dusty, muddy and wet riding
- Works with factory air filters and sensors
Materials and Construction
Can-Am intake parts use rigid, heat-stable plastics for airbox housings and lids, flexible rubber or TPE boots and ducts that seal under vibration, and filter media designed to trap fine dust while keeping airflow.
Common Reasons Riders Replace This Part
- Replacing a cracked airbox, lid or intake boot
- Restoring the seal after water or mud intrusion
- Routine filter and wear-item replacement
- Fixing idle and performance problems from an air leak
Signs Your King Seal Clamp Needs Replacing
- Dust on the clean side of the air filter
- Cracks or splits in boots, ducts or the airbox
- Rough idle, hesitation or a lean condition
- Whistling or sucking noises from the intake
- Water in the airbox after a crossing
Installation Tips
- Check the Can-Am parts diagram for clamps, seals and duct routing.
- Remove the old part and clean dust from the airbox and throttle body inlet.
- Install the new part, making sure every edge seals.
- Tighten clamps evenly without overtightening plastic fittings.
- Start the engine and check for air leaks and a smooth idle.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #293650271 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your King Seal Clamp with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am King Seal Clamp?
The genuine Can-Am part number is 293650271. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #293650271 fit?
It fits 21 Can-Am Maverick models from 2018 to 2019. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
How often should I check my air filter?
After every dusty ride if possible, and replace it at the interval in your operator's guide or sooner.
Can an intake leak damage my engine?
Yes. Unfiltered air carries fine dust that wears pistons, rings and cylinders quickly.
Will this change performance?
It restores factory airflow and sealing. If you had a leak, expect a smoother idle and better response.
Order Your Genuine Can-Am King Seal Clamp Today
Get your Maverick Turbo or Maverick X3 back to factory condition. Add the genuine Can-Am King Seal Clamp (part #293650271) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.