Genuine Can-Am Large Bracket — OEM Part #709400162
Get crisp, predictable control back with a genuine Can-Am Large Bracket. Built for the Can-Am ATV or side-by-side, it fits the original pivots, brackets and connectors.
Pedals, levers, cables, throttles and hand controls translate your input into action. Worn or sticky parts make the machine harder and less safe to operate. This part is confirmed for 141 Can-Am models from 2010 to 2026. See the full fitment list below.
Large Bracket at a Glance
-
OEM part number: 709400162
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Hand Guard
-
Fits: DS youth and sport ATV, Outlander ATV and Renegade sport ATV models, 2010–2026
-
Condition: New
Can-Am Models and Years This Large Bracket Fits
Genuine Can-Am part #709400162 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 141 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Can-Am DS youth and sport ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am DS 450 |
2010–2012, 2014–2015 |
4 |
Can-Am Outlander ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Outlander 4x4 |
2018 |
8 |
| Can-Am Outlander 500 |
2013 |
5 |
| Can-Am Outlander 570 |
2016–2017 |
2 |
| Can-Am Outlander 650 |
2012–2017, 2019–2021, 2024 |
12 |
| Can-Am Outlander 800R |
2011–2015 |
13 |
| Can-Am Outlander 850 |
2016–2024 |
15 |
| Can-Am Outlander 1000 |
2013–2017 |
12 |
| Can-Am Outlander 1000R |
2016–2024 |
17 |
| Can-Am Outlander EFI |
2015, 2019–2024 |
6 |
| Can-Am Outlander PRO |
2016–2018 |
2 |
Can-Am Renegade sport ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Renegade |
2016–2017 |
1 |
| Can-Am Renegade 4x4 |
2018, 2025–2026 |
11 |
| Can-Am Renegade 500 |
2013 |
1 |
| Can-Am Renegade 570 |
2018–2021 |
3 |
| Can-Am Renegade 650 |
2019–2026 |
5 |
| Can-Am Renegade 800R |
2011–2015 |
4 |
| Can-Am Renegade 850 |
2018–2022 |
3 |
| Can-Am Renegade 1000 |
2012–2015 |
4 |
| Can-Am Renegade 1000R |
2018–2026 |
11 |
| Can-Am Renegade EFI |
2019–2023 |
2 |
Why Choose a Genuine Can-Am OEM Large Bracket?
- Factory feel, travel and return
- Direct fit with original brackets and connectors
- Built for mud, water and cold
- Restores safe, predictable control
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM control part, part #709400162
- Original mounting and adjustment
- Corrosion- and wear-resistant construction
- Designed for the listed Can-Am models
- Works with factory cables, sensors and switches
Materials and Construction
Can-Am control parts use steel or aluminum pedals and levers, lined and sealed cables, durable polymer bushings and grips, and sealed sensors for electronic throttles.
Common Reasons Riders Replace This Part
- Fixing sticky, binding or broken controls
- Replacing stretched or frayed cables
- Replacing bent or snapped levers and pedals
- Restoring throttle response and idle return
Signs Your Large Bracket Needs Replacing
- Throttle that sticks or will not return
- Stretched, frayed or binding cables
- Bent or broken levers and pedals
- Excess free play
- Warnings tied to the throttle sensor
Installation Tips
- Use the Can-Am parts diagram for routing, clips and adjusters.
- Route new cables exactly like the originals.
- Set free play to the service manual spec.
- Check full throttle return at full steering lock both ways.
- Test at low speed before riding normally.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #709400162 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Large Bracket with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Large Bracket?
The genuine Can-Am part number is 709400162. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #709400162 fit?
It fits 141 Can-Am DS, Outlander and Renegade models from 2010 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
How do I adjust cable free play?
Use the adjuster at the lever, pedal or engine end and set it to the manual spec.
Why does my throttle stick?
Dirt in the cable, a kinked cable or a sticking throttle body. Replace damaged cables.
Are grips and hand guards model-specific?
Many are. Use the fitment table to confirm.
Order Your Genuine Can-Am Large Bracket Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Large Bracket, OEM part #709400162, from Witchdoctors today and keep your Can-Am ATV or side-by-side running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.