Genuine Can-Am Rear Body Panel Cap, Left — OEM Part #705017923
Get your Can-Am ATV or side-by-side back to factory shape with a genuine Can-Am Rear Body Panel Cap, Left. Aftermarket panels often need drilling or trimming, but this OEM part is molded to BRP's original dimensions, so it bolts to the existing mounts and lines up with the panels around it.
Body panels shield the frame, wiring, cooling system and riders from mud, rocks and water, and they help direct airflow where the machine needs it. This part is confirmed for 71 Can-Am models from 2011 to 2026. See the full fitment list below.
Rear Body Panel Cap, Left at a Glance
-
OEM part number: 705017923
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Body Panels
-
Position: Left
-
Fits: Outlander ATV and Renegade sport ATV models, 2011–2026
-
Condition: New
Can-Am Models and Years This Rear Body Panel Cap Fits
Genuine Can-Am part #705017923 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 71 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Can-Am Outlander ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Outlander 400 |
2011–2014 |
4 |
| Can-Am Outlander 500 |
2011–2012 |
4 |
| Can-Am Outlander 650 |
2011–2012 |
5 |
| Can-Am Outlander 800R |
2011–2012 |
7 |
| Can-Am Outlander XT |
2012–2013 |
1 |
Can-Am Renegade sport ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Renegade |
2016–2017 |
1 |
| Can-Am Renegade 4x4 |
2018, 2025–2026 |
12 |
| Can-Am Renegade 500 |
2011–2015 |
1 |
| Can-Am Renegade 570 |
2018–2022 |
4 |
| Can-Am Renegade 650 |
2020–2026 |
6 |
| Can-Am Renegade 800R |
2011–2015 |
4 |
| Can-Am Renegade 850 |
2018–2022 |
4 |
| Can-Am Renegade 1000 |
2012–2015 |
4 |
| Can-Am Renegade 1000R |
2018–2026 |
12 |
| Can-Am Renegade EFI |
2019–2023 |
2 |
Why Choose a Genuine Can-Am OEM Rear Body Panel Cap?
- Factory molding that lines up with the surrounding panels
- Uses the original mounting points, clips and fasteners
- Restores protection for wiring, cooling parts and riders
- Keeps your machine looking like it left the showroom
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM body panel, part #705017923
- Molded to the original shape and mounting locations
- Built to flex rather than shatter on impact
- Factory color and texture for the listed models (where applicable)
- Works with original Can-Am clips, push pins and screws
Materials and Construction
Can-Am body panels are injection-molded from impact-resistant plastics chosen to flex on impact and stand up to UV, temperature swings and trail chemicals. Molded-in color and texture hide light scratches better than painted panels.
Common Reasons Riders Replace This Part
- Replacing a panel cracked in a rollover or by a rock or tree
- Restoring a machine for sale or trade-in
- Swapping a faded panel for a fresh factory part
- Rebuilding after an accident or insurance claim
Signs Your Rear Body Panel Cap Needs Replacing
- Cracks, splits or holes
- Broken mounting tabs that let the panel rattle or sag
- Missing sections that expose wiring or the frame
- Warping from heat or impact
- Severe fading or chalking
Installation Tips
- Look up the panel on the Can-Am parts diagram to see which clips and screws hold it.
- Remove the fasteners and any overlapping panels.
- Transfer decals, reflectors or brackets you plan to reuse, or order new ones.
- Fit the new panel, starting all fasteners by hand before tightening.
- Replace broken push pins and clips rather than reusing them.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #705017923 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Rear Body Panel Cap with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Rear Body Panel Cap?
The genuine Can-Am part number is 705017923. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #705017923 fit?
It fits 71 Can-Am Outlander and Renegade models from 2011 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Does this panel come painted or with graphics?
Can-Am panels come in the factory color for the listed part number. Decals are usually sold separately and are shown on the same parts diagram.
Do I need new clips or screws?
Push pins and clips often break during removal, so it is worth having spares. They are on the same parts diagram as the panel.
Will an aftermarket panel fit as well?
Some do, but many need trimming or drilling. A genuine Can-Am panel uses the factory mounting points without modification.
Order Your Genuine Can-Am Rear Body Panel Cap Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Rear Body Panel Cap, Left, OEM part #705017923, from Witchdoctors today and keep your Can-Am ATV or side-by-side running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.