Genuine CFMoto Long Engine Block — OEM Part #0JYA-CLB000-0840
When you are inside the engine, there is no room for guesswork. The genuine CFMoto Long Engine Block is built to the exact tolerances of the original part in your UForce 1000 or ZForce 950, so it fits the mating components correctly and keeps the engine running the way CFMoto designed it.
Engine internals and castings work under heat, pressure and constant vibration. A part that is even slightly off can cause oil leaks, low compression, noise or major engine damage. This part is confirmed for 2 CFMoto models from 2019 to 2021. See the full fitment list below.
Long Engine Block at a Glance
-
OEM part number: 0JYA-CLB000-0840
-
Brand: CFMOTO (genuine factory part)
-
Part type: Engines & Long Blocks
-
Fits: UForce utility UTV and ZForce sport UTV models, 2019–2021
-
Condition: New
CFMoto Models and Years This Long Engine Block Fits
Genuine CFMoto part #0JYA-CLB000-0840 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto UForce utility UTV Fitment
| Model |
Model Years |
| CFMoto UForce 1000 |
2019–2021 |
CFMoto ZForce sport UTV Fitment
| Model |
Model Years |
| CFMoto ZForce 950 Sport |
2020–2021 |
Why Choose a Genuine CFMoto OEM Long Engine Block?
- Factory tolerances for correct clearances and fit
- Designed to work with the other OEM parts in the engine
- Helps protect your engine and drivetrain warranty, where one applies
- Lowers the risk of repeat teardown from a poor-fitting part
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM engine part, part #0JYA-CLB000-0840
- Machined to original CFMoto specifications
- Matches factory sealing surfaces and mounting points
- Made for the heat and loads of the listed engines
- Pairs with the gaskets and seals shown on the same parts diagram
Materials and Construction
CFMoto engine parts use materials chosen for their location: aluminum alloy castings for cases, cylinders and covers; hardened and heat-treated steel for shafts, gears and valvetrain parts; and multi-layer or composite gaskets with fluoroelastomer or nitrile oil seals for sealing.
Common Reasons Riders Replace This Part
- Full or partial engine rebuilds
- Repairing damage after overheating or oil starvation
- Fixing oil leaks at cases, covers and seals
- Restoring compression and power on a high-hour engine
Signs Your Long Engine Block Needs Replacing
- Oil leaks around covers, cases or seals
- Ticking, knocking or rattling from the engine
- Low compression or noticeable loss of power
- Blue or white smoke, or high oil consumption
- Metal debris in the oil or on the drain plug magnet
Installation Tips
- Follow the CFMoto service manual for your model. Engine work requires exact procedures and torque specs.
- Clean all mating surfaces thoroughly and replace gaskets and seals you disturb.
- Measure critical clearances with proper tools before final assembly.
- Lubricate moving parts with clean engine oil or assembly lube as specified.
- Torque fasteners in the specified sequence, then refill fluids and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #0JYA-CLB000-0840 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Recommended Accessories and Maintenance Supplies
Pair your Long Engine Block with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Long Engine Block?
The genuine CFMoto part number is 0JYA-CLB000-0840. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #0JYA-CLB000-0840 fit?
It fits the UForce 1000 (2019–2021); ZForce 950 Sport (2020–2021).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Should I replace gaskets and seals at the same time?
Yes. Any gasket or seal you disturb should be replaced. They are listed on the same CFMoto parts diagram, so you can order everything at once.
Is OEM worth it over aftermarket engine parts?
For internals, OEM parts are made to the exact clearances the engine was designed around, which helps avoid noise, wear and leaks that a poor fit can cause.
Can I do this repair myself?
Experienced home mechanics can do many engine repairs with the service manual and the right tools. Internal work that needs precise measurement is best left to a qualified technician if you are not set up for it.
Order Your Genuine CFMoto Long Engine Block Today
Get your UForce 1000 or ZForce 950 back to factory condition. Add the genuine CFMoto Long Engine Block (part #0JYA-CLB000-0840) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.