Genuine Kawasaki Magnetic Switch Damper — OEM Part #92161-1722
Restore reliable power and electronics with a genuine Kawasaki Magnetic Switch Damper. Built for the Kawasaki ATV or side-by-side, it matches the factory connectors and electrical values, with no splicing or adapters.
Harnesses, switches, relays, sensors, charging parts, ignition parts and control units all work together. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 85 Kawasaki models from 1990 to 2027. See the full fitment list below.
Magnetic Switch Damper at a Glance
-
OEM part number: 92161-1722
-
Brand: Kawasaki (genuine factory part)
-
Part type: Starter Components
-
Fits: Brute Force ATV, Mule utility side-by-side, Prairie utility ATV, Ridge ranch side-by-side and Teryx recreation side-by-side models, 1990–2027
-
Condition: New
Kawasaki Models and Years This Magnetic Switch Damper Fits
Genuine Kawasaki part #92161-1722 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 85 Kawasaki model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Kawasaki Brute Force ATV Fitment
| Model Family |
Model Years |
Trims |
| Kawasaki Brute Force 650 |
2007–2013 |
2 |
| Kawasaki Brute Force 750 |
2007–2025 |
10 |
Kawasaki Mule utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Kawasaki Mule 1000 |
1990–1995, 2007 |
1 |
| Kawasaki Mule 4000 |
2014–2023, 2025–2027 |
2 |
| Kawasaki Mule 4010 |
2014–2027 |
7 |
Kawasaki Prairie utility ATV Fitment
| Model Family |
Model Years |
Trims |
| Kawasaki Prairie 360 |
2007–2013 |
4 |
Kawasaki Ridge ranch side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Kawasaki Ridge |
2024–2026 |
18 |
Kawasaki Teryx recreation side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Kawasaki Teryx |
2015–2024 |
4 |
| Kawasaki Teryx 750 |
2008–2013 |
6 |
| Kawasaki Teryx KRX |
2020–2027 |
9 |
| Kawasaki Teryx KRX4 |
2023–2027 |
8 |
| Kawasaki Teryx4 |
2012–2013, 2015–2026 |
13 |
| Kawasaki Teryx5 |
2026 |
1 |
Why Choose a Genuine Kawasaki OEM Magnetic Switch Damper?
- Plug-and-play fit with factory connectors
- Correct electrical ratings for your machine
- Weather-sealed for mud, water and pressure washing
- Works with the factory ECU or CDI, meter and diagnostics
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM electrical part, part #92161-1722
- Original connectors, terminals and pin-outs
- Water- and vibration-resistant construction
- Designed for the listed Kawasaki models
- No splicing or adapters needed
Materials and Construction
Kawasaki electrical parts use tinned copper conductors, sealed connectors, heat- and abrasion-resistant insulation and loom, and sealed housings for modules and sensors exposed to water and vibration.
Common Reasons Owners Replace This Part
- Fixing no-start, no-charge or intermittent faults
- Replacing harness sections damaged by rodents, heat or abrasion
- Replacing failed switches, relays, sensors or modules
- Restoring meter functions and warning lights
Signs Your Magnetic Switch Damper Needs Replacing
- No-start, clicking or intermittent power loss
- Check engine or warning lights
- Battery not charging
- Melted, corroded or broken connectors and wires
- Switches, meters or accessories that do not work
Installation Tips
- Disconnect the negative battery cable first.
- Use the Kawasaki parts and wiring diagrams to confirm routing and connectors.
- Clean corroded connectors with contact cleaner.
- Make sure every connector clicks fully and seals.
- Route wiring away from heat and moving parts, then test.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #92161-1722 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Magnetic Switch Damper with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Magnetic Switch Damper?
The genuine Kawasaki part number is 92161-1722. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #92161-1722 fit?
It fits 85 Kawasaki Brute Force, Mule, Prairie, Ridge and Teryx models from 1990 to 2027. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Will this part need programming?
Most plug-in parts do not. Some control units may need dealer setup. Check your service manual or contact us before ordering.
How do I find an electrical problem before buying parts?
Start with the battery, grounds and fuses. Many faults are a loose ground or corroded connector.
Should I use dielectric grease?
A light coat on connector seals helps keep water out. Follow your service manual.
Order Your Genuine Kawasaki Magnetic Switch Damper Today
Work and ride with confidence on parts built for your machine. Order the genuine Kawasaki Magnetic Switch Damper, OEM part #92161-1722, from Witchdoctors today and keep your Kawasaki ATV or side-by-side running the way Kawasaki designed it.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.
-
Hollister Hills SVRA — Hollister, California: a state vehicular recreation area with designated ATV and 4x4 areas
-
Windrock Park — Oliver Springs, Tennessee: 300+ miles of mountain trails