Genuine Polaris Spark Arrestor — OEM Part #1262239
Keep heat and noise where they belong with a genuine Polaris Spark Arrestor. Built for the Polaris ATV or side-by-side, it bolts to the original mounts so the exhaust stays sealed, quiet and clear of plastics, wiring and riders.
The exhaust routes hot gas away from the engine, controls noise and keeps heat away from panels, wiring and riders. Loose shields and leaks lead to melted parts and failed inspections. This part is confirmed for 104 Polaris models from 2012 to 2026. See the full fitment list below.
Spark Arrestor at a Glance
-
OEM part number: 1262239
-
Brand: Polaris (genuine factory part)
-
Part type: Spark Arrestor
-
Fits: ACE single-seat, RZR sport side-by-side, Ranger utility side-by-side, Scrambler ATV and Sportsman ATV models, 2012–2026
-
Condition: New
Polaris Models and Years This Spark Arrestor Fits
Genuine Polaris part #1262239 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 104 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris ACE single-seat Fitment
| Model Family |
Model Years |
Trims |
| Polaris ACE 900 |
2016 |
1 |
Polaris RZR sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris RZR |
2012–2013 |
3 |
| Polaris RZR 570 |
2012–2020 |
6 |
| Polaris RZR 800 |
2012, 2014 |
4 |
| Polaris RZR S |
2012–2014, 2017 |
4 |
| Polaris RZR Trail |
2021–2022 |
3 |
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger |
2015 |
1 |
| Polaris Ranger 500 |
2017–2022 |
8 |
| Polaris Ranger 570 |
2015–2025 |
24 |
| Polaris Ranger ETX |
2015–2016 |
1 |
Polaris Scrambler ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Scrambler 850 |
2013–2026 |
6 |
| Polaris Scrambler 1000 |
2014–2019 |
4 |
| Polaris Scrambler HO |
2013 |
1 |
| Polaris Scrambler XP |
2014–2018 |
4 |
Polaris Sportsman ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Sportsman 570 |
2019–2023 |
29 |
| Polaris Sportsman Touring |
2019–2022 |
4 |
| Polaris Sportsman X2 |
2019 |
1 |
Why Choose a Genuine Polaris OEM Spark Arrestor?
- Factory fit and clearances
- Keeps noise at factory levels for trail rules
- Protects plastics, wiring and riders from heat
- Uses the original hangers, gaskets and hardware
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM exhaust part, part #1262239
- Original mounting points and pipe routing
- High-temperature materials and finishes
- Designed for the listed Polaris engines
- Pairs with OEM gaskets and hardware on the same diagram
Materials and Construction
Polaris exhaust parts are heat-resistant steel or stainless steel. Heat shields use stamped steel, aluminum or insulated layers, and gaskets use graphite or multi-layer steel to seal at high temperature.
Common Reasons Riders Replace This Part
- Fixing rattles from loose or broken heat shields
- Repairing exhaust leaks at joints
- Replacing a damaged muffler or spark arrestor
- Meeting trail noise and spark arrestor rules
Signs Your Spark Arrestor Needs Replacing
- Rattling or buzzing from the exhaust area
- Ticking or puffing from a leak
- Melted or discolored plastics near the exhaust
- Soot around joints and gaskets
- A damaged, clogged or missing spark arrestor
Installation Tips
- Let the exhaust cool completely.
- Spray hardware with penetrating oil, since exhaust bolts often seize.
- Replace gaskets at every joint you open.
- Fit with hardware loose, align for clearance, then tighten to spec.
- Run the engine and check for leaks, rattles and clearance to plastics.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #1262239 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Spark Arrestor with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Spark Arrestor?
The genuine Polaris part number is 1262239. Use it to match this part to your factory parts diagram.
Which Polaris models does part #1262239 fit?
It fits 104 Polaris ACE, RZR, Ranger, Scrambler and Sportsman models from 2012 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need a spark arrestor?
Most public trails require a working, approved spark arrestor. Check local rules.
Will an aftermarket exhaust add horsepower?
Sometimes a little, but often mostly noise, and it may need a tune. OEM keeps factory noise and performance.
Should I reuse exhaust gaskets?
No. They crush when tightened and rarely reseal.
Order Your Genuine Polaris Spark Arrestor Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Spark Arrestor, OEM part #1262239, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.