Genuine CFMoto Oil Dipstick — OEM Part #0JYA-014004
Protect your engine with a genuine CFMoto Oil Dipstick. It is built to the original specification for your ZForce 800 or ZForce 950, so it seals correctly, holds pressure and routes oil the way CFMoto designed.
Oil pumps, lines, coolers, filters and dipsticks keep oil flowing, cool and clean. One leaking line or worn pump can starve bearings and destroy an engine quickly. This part is confirmed for 7 CFMoto models from 2020 to 2025. See the full fitment list below.
Oil Dipstick at a Glance
-
OEM part number: 0JYA-014004
-
Brand: CFMOTO (genuine factory part)
-
Part type: Dipstick
-
Fits: ZForce sport UTV models, 2020–2025
-
Condition: New
CFMoto Models and Years This Oil Dipstick Fits
Genuine CFMoto part #0JYA-014004 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto ZForce sport UTV Fitment
| Model |
Model Years |
| CFMoto ZForce 800 Trail |
2023–2025 |
| CFMoto ZForce 950 EX |
2022 |
| CFMoto ZForce 950 HO EX |
2022–2024 |
| CFMoto ZForce 950 HO Sport |
2022–2023 |
| CFMoto ZForce 950 Sport |
2020–2025 |
| CFMoto ZForce 950 Sport 4 |
2024–2025 |
| CFMoto ZForce 950 Trail |
2023–2025 |
Why Choose a Genuine CFMoto OEM Oil Dipstick?
- Correct fit and sealing with factory fittings
- Maintains designed oil pressure and flow
- Heat- and oil-resistant materials
- Protects expensive engine internals
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM part, part #0JYA-014004
- Matches original fittings, routing and mounting points
- Made for continuous exposure to hot engine oil
- Designed for the listed CFMoto engines
- Pairs with OEM gaskets, O-rings and clamps from the same diagram
Materials and Construction
CFMoto oil-system parts combine aluminum and steel housings, steel-braided or reinforced rubber hose rated for hot oil, and nitrile or fluoroelastomer O-rings and seals designed for long-term oil and heat exposure.
Common Reasons Riders Replace This Part
- Fixing oil leaks from lines, fittings or coolers
- Restoring oil pressure during a rebuild
- Routine replacement of wear items at service intervals
- Repairing damage from a trail impact
Signs Your Oil Dipstick Needs Replacing
- Oil drips or residue around lines, fittings or the cooler
- Oil pressure warning light or low pressure readings
- Cracked, hardened or swollen hoses
- A damaged or bent dipstick or tube
- Engine running hotter than normal
Installation Tips
- Drain the oil and let the engine cool before opening the system.
- Check the CFMoto parts diagram for routing and the O-rings or crush washers you will need.
- Lubricate new O-rings with clean oil and torque fittings to spec. Do not overtighten.
- Refill with the correct oil grade and quantity for your model.
- Run the engine, check for leaks, then recheck the oil level.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #0JYA-014004 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Oil Dipstick and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Oil Dipstick with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Oil Dipstick?
The genuine CFMoto part number is 0JYA-014004. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #0JYA-014004 fit?
It fits 7 CFMoto ZForce models from 2020 to 2025. The complete list is in the fitment tables above.
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Which oil should I use after the repair?
Use the oil grade and quantity listed in your CFMoto owner's manual. A complete oil change kit makes sure you have the correct filter and drain plug washer too.
Do I need new O-rings or crush washers?
Yes. Reusing old seals is a common cause of leaks. Replace any you disturb.
How often should I change my oil and filter?
Follow the service intervals in your owner's manual, and change it more often if you ride in dust, mud, water or heavy loads.
Order Your Genuine CFMoto Oil Dipstick Today
Ride with confidence on parts built for your machine. Order the genuine CFMoto Oil Dipstick, OEM part #0JYA-014004, from Witchdoctors today and keep your ZForce 800 or ZForce 950 running the way CFMoto designed it.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.