Genuine CFMoto Oil Pipe Rubber — OEM Part #9030-180008
Protect your engine with a genuine CFMoto Oil Pipe Rubber. It is built to the original specification for your CFMoto ATV or UTV, so it seals correctly, holds pressure and routes oil the way CFMoto designed.
Oil pumps, lines, coolers, filters and dipsticks keep oil flowing, cool and clean. One leaking line or worn pump can starve bearings and destroy an engine quickly. This part is confirmed for 15 CFMoto models from 2008 to 2025. See the full fitment list below.
Oil Pipe Rubber at a Glance
-
OEM part number: 9030-180008
-
Brand: CFMOTO (genuine factory part)
-
Part type: Oil Line / Hose
-
Fits: CForce ATV and UForce utility UTV models, 2008–2025
-
Condition: New
CFMoto Models and Years This Oil Pipe Rubber Fits
Genuine CFMoto part #9030-180008 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto CForce ATV Fitment
| Model |
Model Years |
| CFMoto CForce 500 SWB |
2013–2016 |
| CFMoto CForce 500 X5 LWB |
2010–2012 |
| CFMoto CForce 500 X5 SWB |
2010–2012 |
| CFMoto CForce 600 LWB |
2013–2014 |
| CFMoto CForce 600 X6 LWB |
2010–2012 |
| CFMoto CForce 600 X6 SWB |
2010–2012 |
| CFMoto CForce 800 |
2017 |
| CFMoto CForce 800 X8 |
2013–2016 |
| CFMoto CForce EV110 |
2024 |
CFMoto UForce utility UTV Fitment
| Model |
Model Years |
| CFMoto UForce 500 |
2008–2010, 2016–2017 |
| CFMoto UForce 600 |
2011–2014, 2021–2025 |
| CFMoto UForce 800 |
2013–2016, 2018–2022 |
| CFMoto UForce 800 EPS |
2017 |
| CFMoto UForce 1000 |
2024–2025 |
| CFMoto UForce 1000 XL |
2024–2025 |
Why Choose a Genuine CFMoto OEM Oil Pipe Rubber?
- Correct fit and sealing with factory fittings
- Maintains designed oil pressure and flow
- Heat- and oil-resistant materials
- Protects expensive engine internals
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM part, part #9030-180008
- Matches original fittings, routing and mounting points
- Made for continuous exposure to hot engine oil
- Designed for the listed CFMoto engines
- Pairs with OEM gaskets, O-rings and clamps from the same diagram
Materials and Construction
CFMoto oil-system parts combine aluminum and steel housings, steel-braided or reinforced rubber hose rated for hot oil, and nitrile or fluoroelastomer O-rings and seals designed for long-term oil and heat exposure.
Common Reasons Riders Replace This Part
- Fixing oil leaks from lines, fittings or coolers
- Restoring oil pressure during a rebuild
- Routine replacement of wear items at service intervals
- Repairing damage from a trail impact
Signs Your Oil Pipe Rubber Needs Replacing
- Oil drips or residue around lines, fittings or the cooler
- Oil pressure warning light or low pressure readings
- Cracked, hardened or swollen hoses
- A damaged or bent dipstick or tube
- Engine running hotter than normal
Installation Tips
- Drain the oil and let the engine cool before opening the system.
- Check the CFMoto parts diagram for routing and the O-rings or crush washers you will need.
- Lubricate new O-rings with clean oil and torque fittings to spec. Do not overtighten.
- Refill with the correct oil grade and quantity for your model.
- Run the engine, check for leaks, then recheck the oil level.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #9030-180008 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Oil Pipe Rubber and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Oil Pipe Rubber with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Oil Pipe Rubber?
The genuine CFMoto part number is 9030-180008. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #9030-180008 fit?
It fits 15 CFMoto CForce and UForce models from 2008 to 2025. The complete list is in the fitment tables above.
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Which oil should I use after the repair?
Use the oil grade and quantity listed in your CFMoto owner's manual. A complete oil change kit makes sure you have the correct filter and drain plug washer too.
Do I need new O-rings or crush washers?
Yes. Reusing old seals is a common cause of leaks. Replace any you disturb.
How often should I change my oil and filter?
Follow the service intervals in your owner's manual, and change it more often if you ride in dust, mud, water or heavy loads.
Order Your Genuine CFMoto Oil Pipe Rubber Today
Ride with confidence on parts built for your machine. Order the genuine CFMoto Oil Pipe Rubber, OEM part #9030-180008, from Witchdoctors today and keep your CFMoto ATV or UTV running the way CFMoto designed it.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.