Genuine Polaris Oil Pump — OEM Part #3023124
Clean, steady oil flow keeps an engine alive. The genuine Polaris Oil Pump restores the factory lubrication system on your Polaris ATV or side-by-side, fitting the original ports and mounts so oil goes exactly where it is needed.
Oil pumps, lines, coolers, filters and dipsticks keep oil flowing, cool and clean. One leaking line or worn pump can starve bearings and destroy an engine quickly. This part is confirmed for 147 Polaris models from 2016 to 2026. See the full fitment list below.
Oil Pump at a Glance
-
OEM part number: 3023124
-
Brand: Polaris (genuine factory part)
-
Part type: Oil Pump & Components
-
Fits: General crossover side-by-side, RZR sport side-by-side and Xpedition adventure side-by-side models, 2016–2026
-
Condition: New
Polaris Models and Years This Oil Pump Fits
Genuine Polaris part #3023124 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 147 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris General crossover side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris General 1000 |
2017–2026 |
41 |
| Polaris General XP |
2020–2026 |
38 |
Polaris RZR sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris RZR |
2025 |
1 |
| Polaris RZR 64 |
2021 |
1 |
| Polaris RZR 1000 |
2016, 2018–2021 |
5 |
| Polaris RZR RS1 |
2018–2022 |
3 |
| Polaris RZR S |
2019–2021 |
6 |
| Polaris RZR S4 |
2020–2021 |
1 |
| Polaris RZR Trail |
2021–2026 |
7 |
| Polaris RZR Trctr |
2025 |
1 |
| Polaris RZR XP |
2017–2026 |
32 |
| Polaris RZR Xp4 |
2019 |
1 |
Polaris Xpedition adventure side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Xpedition Adv |
2024–2026 |
4 |
| Polaris Xpedition XP |
2024–2026 |
4 |
| Polaris Xpedition Xp5 |
2024–2026 |
2 |
Why Choose a Genuine Polaris OEM Oil Pump?
- Correct fit and sealing with factory fittings
- Maintains designed oil pressure and flow
- Heat- and oil-resistant materials
- Protects expensive engine internals
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM part, part #3023124
- Original fittings, routing and mounting points
- Made for continuous exposure to hot oil
- Designed for the listed engines
- Pairs with OEM O-rings, gaskets and clamps on the same diagram
Materials and Construction
Polaris oil-system parts combine aluminum and steel housings, reinforced hose rated for hot oil, and nitrile or fluoroelastomer O-rings and seals for long-term oil and heat exposure.
Common Reasons Riders Replace This Part
- Fixing oil leaks from lines, fittings or coolers
- Restoring oil pressure during a rebuild
- Routine replacement of wear items at service
- Repairing damage from a trail impact
Signs Your Oil Pump Needs Replacing
- Oil drips or residue around lines, fittings or the cooler
- Oil pressure warning or low readings
- Cracked, hardened or swollen hoses
- A damaged dipstick or tube
- Engine running hotter than normal
Installation Tips
- Drain the oil and let the engine cool first.
- Check the Polaris parts diagram for routing and the O-rings or crush washers you need.
- Lubricate new O-rings with clean oil and torque fittings to spec without overtightening.
- Refill with the correct oil grade and quantity for your model.
- Run the engine, check for leaks, then recheck the oil level.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #3023124 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Oil Pump with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Oil Pump?
The genuine Polaris part number is 3023124. Use it to match this part to your factory parts diagram.
Which Polaris models does part #3023124 fit?
It fits 147 Polaris General, RZR and Xpedition models from 2016 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Which oil should I use?
Use the oil type and quantity in your Polaris owner's manual. An oil change kit makes sure you have the right filter and washer too.
Do I need new O-rings or crush washers?
Yes. Reused seals are a common cause of leaks.
How often should I change oil and filter?
Follow the intervals in your owner's manual, and change it sooner after dust, mud, water or heavy loads.
Order Your Genuine Polaris Oil Pump Today
Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris Oil Pump (part #3023124) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.