Passenger Hand Grip, Right 4020-140700-10000 by CFMOTO

Genuine CFMoto Passenger Hand Grip, Right — OEM Part #4020-140700-10000

Comfort and safety go hand in hand on a long ride. The genuine CFMoto Passenger Hand Grip, Right restores the factory seating and restraint system on your CForce models, mounting exactly where the original did so it supports and protects riders as designed.

Seats, belts, nets and their mounts keep riders in position over rough ground. Worn or damaged parts reduce comfort and, more importantly, protection. This part is confirmed for 11 CFMoto models from 2010 to 2019. See the full fitment list below.

Passenger Hand Grip, Right at a Glance

• OEM part number: 4020-140700-10000
• Brand: CFMOTO (genuine factory part)
• Part type: Grab Handle
• Position: Right
• Fits: CForce ATV models, 2010–2019
• Condition: New

CFMoto Models and Years This Passenger Hand Grip, Right Fits

Genuine CFMoto part #4020-140700-10000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto CForce ATV Fitment

Why Choose a Genuine CFMoto OEM Passenger Hand Grip, Right?

• Factory fit with the original seat base, frame and mounts
• Restores CFMoto's designed rider support and restraint
• Weather-resistant materials made for outdoor use
• Keeps safety systems working as intended
• Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

• Genuine CFMoto OEM part, part #4020-140700-10000
• Matches the original mounting points and hardware
• UV- and water-resistant covers and webbing (where applicable)
• Designed for the listed CFMoto models
• Works with factory seat latches, belts and interlocks

Materials and Construction

CFMoto seating parts use UV-resistant marine-grade vinyl, closed-cell foam that resists water absorption, and steel or plastic seat bases. Safety belts use high-strength polyester webbing with steel latch hardware built to factory specification.

Common Reasons Riders Replace This Part

• Replacing torn or worn seat covers and cushions
• Replacing frayed, cut or sun-damaged belts
• Fixing loose or broken seat mounts and latches
• Restoring a machine for resale or a new owner

Signs Your Passenger Hand Grip, Right Needs Replacing

• Torn vinyl or waterlogged foam
• Seat belt webbing that is frayed, cut or faded
• Belts that do not retract or latch properly
• Seats that rock, slide or will not lock in place
• Broken nets, buckles or mounts

Installation Tips

1. Use the CFMoto parts diagram to identify mounting hardware and any seat-belt interlock wiring.
2. Remove the old part, noting how belts and wiring are routed.
3. Install the new part with the correct factory hardware.
4. Torque seat-belt anchor bolts to spec; never substitute hardware on restraint anchors.
5. Test latches, retractors and interlocks before riding.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

CFMoto Parts Diagrams for This Part

Part #4020-140700-10000 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:

• Rack (Steel) diagram — 2019 CFMoto CForce 600
• Rack (Steel) diagram — 2018 CFMoto CForce 500 HO
• Front & Rear Rack diagram — 2017 CFMoto CForce 800
• Front & Rear Rack diagram — 2016 CFMoto CForce 400

Other OEM Parts in This Assembly

Doing the job right? These genuine CFMoto parts are installed alongside the Passenger Hand Grip, Right and are often replaced at the same time:

• CFMoto Rear Reflector (#5190-160230-00002)
• CFMoto Bolt (#30006-060016810)
• CFMoto Bolt M8x20 (#30006-080020810)
• CFMoto Bolt M8x16 (#30006-080016810)
• CFMoto Backrest (#9CR6-141300-10000)
• CFMoto Nut M5 (#30202-050110)

Recommended Accessories and Maintenance Supplies

Pair your Passenger Hand Grip, Right with these parts and supplies:

• UTV seat belts and harnesses — Belts and harnesses for added security
• Replacement seats and covers — Seat covers and replacement seats
• UTV grab handles — Passenger grab handles for rough terrain
• Seat and leather care — Cleaners and protectants for vinyl and leather
• CFMoto OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• How to Inspect & Replace UTV Seat Belts | Safety Tech Tip
• How to Clean UTV & ATV Vinyl Seats to Prevent Cracking
• UTV Window Safety Nets and Buckles: A Buyer’s Guide
• CFMoto OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this CFMoto Passenger Hand Grip, Right?

The genuine CFMoto part number is 4020-140700-10000. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #4020-140700-10000 fit?

It fits 11 CFMoto CForce models from 2010 to 2019. The complete list is in the fitment tables above.

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

Should seat belts be replaced after an accident?

Yes. Belts that have restrained a rider in a crash or rollover can be stretched or damaged internally and should be replaced.

Will this fit an aftermarket seat?

It is designed for the factory CFMoto seat and mounts on the listed models. Aftermarket seats may need their own brackets.

How do I keep vinyl seats from cracking?

Keep them clean and use a UV protectant made for vinyl. Covering the machine when parked outside also helps a lot.

Order Your Genuine CFMoto Passenger Hand Grip, Right Today

Get your CForce models back to factory condition. Add the genuine CFMoto Passenger Hand Grip, Right (part #4020-140700-10000) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all CFMoto OEM parts

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Hawk Pride Mountain Offroad — Tuscumbia, Alabama: about 1,000 acres of wooded trails
• Badlands Off Road Park — Attica, Indiana: trails, hill climbs and mud pits