Genuine Victory & Polaris Air Intake Trap Plug — OEM Part #5435299
Hard starts, surging and fuel smell usually trace back to the fuel system. The genuine Victory & Polaris Air Intake Trap Plug restores factory fuel delivery on your Victory Vision, matching the original fittings, seals and electrical connectors.
The fuel tank, pump, regulator, lines, throttle body, intake and air cleaner deliver clean air and fuel in the right ratio. One leak or weak part shows up as poor running. Because Victory, Indian and Polaris are all Polaris Inc. brands, this part number is shared across Victory motorcycles and Polaris off-road vehicles. Every model it fits is listed below.
Air Intake Trap Plug at a Glance
-
OEM part number: 5435299
-
Brand: Victory & Polaris (genuine Polaris-made OEM part)
-
Part type: Throttle Body
-
Victory fitment: Vision, 2008–2017
-
Polaris off-road fitment: ATP, Hawkeye, Magnum, Scrambler, Sportsman, Trail Blazer and Trail Boss, 2004–2014
-
Condition: New
Models and Years This Air Intake Trap Plug Fits
Genuine part #5435299 fits the models and years below, across Victory motorcycles and Polaris off-road vehicles. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Victory Motorcycle Fitment
| Model |
Model Years |
| Victory Vision |
2008–2009, 2011–2017 |
| Victory Vision Tour |
2009–2010 |
Polaris Off-Road Vehicle Fitment
51 Polaris model variants share this part, grouped here by model family.
| Model Family |
Model Years |
Variants |
| Polaris ATP |
2005 |
1 |
| Polaris Hawkeye |
2011–2014 |
3 |
| Polaris Magnum |
2004–2005 |
1 |
| Polaris Scrambler |
2007–2012 |
4 |
| Polaris Sportsman |
2004, 2007–2014 |
38 |
| Polaris Trail Blazer |
2008–2013 |
2 |
| Polaris Trail Boss |
2005, 2007, 2009–2013 |
2 |
Yes, a motorcycle part can fit an ATV or side-by-side: Polaris uses many of the same fasteners, seals, filters and electrical parts across its motorcycle and off-road lines, so this part number also appears in the Polaris off-road parts catalog.
Why Choose a Genuine Victory & Polaris OEM Air Intake Trap Plug?
- Factory fit with tank, lines and connectors
- Maintains the fuel pressure the EFI is calibrated for
- Fuel- and ethanol-resistant seals
- Sealed intake for correct air-fuel ratio
- Sold by Witchdoctors, a Victory and Indian parts specialist since the Victory years
Features and Materials
Key Features
- Genuine Victory & Polaris OEM fuel or intake part, part #5435299
- Original fittings, seals and connectors
- Built for gasoline and ethanol blends
- Designed for the listed Victory & Polaris models
- Works with factory EFI and sensors
Materials and Construction
Victory fuel and intake parts use ethanol-resistant hose and O-rings, steel or plastic tank components, precision pump and injector parts, and sealed intake boots and air filter media.
Common Reasons Riders Replace This Part
- Fixing hard starting, stalling or surging
- Repairing fuel leaks or fuel smell
- Replacing a failed fuel pump or regulator
- Replacing air filters and intake seals
Signs Your Air Intake Trap Plug Needs Replacing
- Long cranking or hard starts
- Surging, hesitation or stalling
- Fuel smell or wet spots
- Whine or no prime from the fuel pump
- Dirty air filter or cracked intake boot
Installation Tips
- Work in a ventilated area away from sparks and relieve fuel pressure first.
- Disconnect the battery before working on the pump or wiring.
- Use the Victory parts diagram for O-rings, clamps and routing.
- Install with fresh seals and secure every clamp and connector.
- Turn the key to prime, check for leaks, then start.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #5435299 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Air Intake Trap Plug with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Victory & Polaris Air Intake Trap Plug?
The genuine part number is 5435299. Use it to match this part to your factory parts diagram.
Which Victory motorcycles does part #5435299 fit?
It fits the Victory Vision (2008–2009, 2011–2017); Victory Vision Tour (2009–2010).
Does part #5435299 fit Indian motorcycles?
Not according to the factory fitment data we have. If you ride an Indian, contact us with your VIN and we will find the right part.
Does it fit Polaris ATVs or side-by-sides?
Yes. The same part number is used on 51 Polaris off-road models, including the ATP, Hawkeye, Magnum, Scrambler, Sportsman, Trail Blazer and Trail Boss. See the Polaris table above.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Victory and Polaris models, not an aftermarket copy.
How do I know the fuel pump is failing?
Hard starts, surging under load and a missing prime whine are common signs. Our blog has a full diagnosis guide.
Should I replace the fuel tank seal when the pump is out?
Yes. A new seal is cheap insurance against leaks.
Does ethanol fuel hurt my bike?
Ethanol attracts moisture during storage. Use stabilizer and follow your manual for fuel.
Order Your Genuine Victory & Polaris Air Intake Trap Plug Today
Keep your Victory Vision on the road. Add the genuine Victory & Polaris Air Intake Trap Plug (part #5435299) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Victory
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.