Keep Your Drinks at the Perfect Temp
Picture this—you’re dominating the trails and you’ve just ridden miles from home. You’ve obviously worked up a sweat and have decided it’s time to stop and cool down. You reach for the cold one you grabbed from the fridge before leaving and discover that it’s now, well, not so cold. Sucks, huh? Even in freezing temperatures it can be hard to keep your drinks cold, thanks to all that heat escaping from your engine. Nobody wants to let a lukewarm beverage ruin their ride, and that’s why we designed the super handy Cup Holder Insulators for your Polaris RZR. These foam insulators are the best way to keep your drink chilled and refreshing all year long.
Rigid, Effective Insulation
Each cup holder insulator is made with closed-cell foam, which is the most rigid and effective type of foam insulation. The cells of the foam are pressed firmly together, so air and moisture have a hard time escaping. The aluminum foil tape acts as an outer layer around the foam structure, creating an additional barrier that keeps cold air in and engine heat out. The two layers work together to give you a super sturdy design that keeps your drinks cold longer than any other insulating product on the market.
Easy Install Process
This product comes with a pair of cup holder insulators, so your buddy will benefit from your purchase, too. Each insulator is placed around the exterior of the cup holder, so they don’t take up any space inside the cup holder itself. Installation is easy—just remove the console, flip it over, and place the foam over the cup holders. Finish the process by covering the foam with the pre-measured aluminum foil tape. We will note that this step might create a small puncture in the foil, as shown in our instruction manual, but this won’t affect the integrity of the product. After this, it’s as simple as re-installing your console and then you’re good to go!
Picture this—you’re dominating the trails and you’ve just ridden miles from home. You’ve obviously worked up a sweat and have decided it’s time to stop and cool down. You reach for the cold one you grabbed from the fridge before leaving and discover that it’s now, well, not so cold. Sucks, huh? Even in freezing temperatures it can be hard to keep your drinks cold, thanks to all that heat escaping from your engine. Nobody wants to let a lukewarm beverage ruin their ride, and that’s why we designed the super handy Cup Holder Insulators for your Polaris RZR. These foam insulators are the best way to keep your drink chilled and refreshing all year long.
Rigid, Effective Insulation
Each cup holder insulator is made with closed-cell foam, which is the most rigid and effective type of foam insulation. The cells of the foam are pressed firmly together, so air and moisture have a hard time escaping. The aluminum foil tape acts as an outer layer around the foam structure, creating an additional barrier that keeps cold air in and engine heat out. The two layers work together to give you a super sturdy design that keeps your drinks cold longer than any other insulating product on the market.
Easy Install Process
This product comes with a pair of cup holder insulators, so your buddy will benefit from your purchase, too. Each insulator is placed around the exterior of the cup holder, so they don’t take up any space inside the cup holder itself. Installation is easy—just remove the console, flip it over, and place the foam over the cup holders. Finish the process by covering the foam with the pre-measured aluminum foil tape. We will note that this step might create a small puncture in the foil, as shown in our instruction manual, but this won’t affect the integrity of the product. After this, it’s as simple as re-installing your console and then you’re good to go!
WARNING: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.
⚠ California Proposition 65 Warning ⚠
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.
Fitment Disclosure
This fitment information is provided to you based on the manufacturer's information. Consult manufacturer publication(s) and/or website(s) for specific fitment and other important application information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the information provided.
General Safety Warning
Failure to follow manufacturer's recommendations and requirements can cause product failure resulting in serious injury or death. While effort has been taken in collecting accurate fitment information, Witchdoctors Billet Specialties LLC accepts no liability for loss or damage resulting from errors or omissions. If you believe any of the information provided is erroneous, please email: Fitment@buywitchdoctors.com
Shipping
Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.
All orders over $500 will require a signature.
Please see International Shipping page for orders shipping outside the US.
See our full Shipping Policy page for further details.
Product Availability
We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.
Returns
If your order arrives and it is not right, we will we'll fix it. We promise!
Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 business days of delivery receipt of your item. We will issue a refund to your original payment method.
See our full Return Policy for all of the pertinent details.
Polaris RZR Cup Holder Insulator by SuperATV
$49.95 USD
Found URLs:
- Choosing a selection results in a full page refresh.
