Positive Battery Cable 710004878 by Can-Am

Genuine Can-Am Positive Battery Cable — OEM Part #710004878

Restore reliable power and electronics with a genuine Can-Am Positive Battery Cable. Built for the Maverick or Maverick 1000R, it matches the factory connectors and electrical values, with no splicing or adapters.

Harnesses, switches, relays, sensors, charging parts and control modules all talk to each other. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 3 Can-Am models from 2016 to 2018. See the full fitment list below.

Positive Battery Cable at a Glance

• OEM part number: 710004878
• Brand: Can-Am by BRP (genuine factory part)
• Part type: Battery Cable
• Fits: Maverick sport side-by-side models, 2016–2018
• Condition: New

Can-Am Models and Years This Positive Battery Cable Fits

Genuine Can-Am part #710004878 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Can-Am Maverick sport side-by-side Fitment

Why Choose a Genuine Can-Am OEM Positive Battery Cable?

• Plug-and-play fit with factory connectors
• Correct electrical ratings for your machine
• Weather-sealed for mud, water and pressure washing
• Works with the factory ECM, gauge and diagnostics
• Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support

Features and Materials

Key Features

• Genuine Can-Am OEM electrical part, part #710004878
• Original connectors, terminals and pin-outs
• Water- and vibration-resistant construction
• Designed for the listed Can-Am models
• No splicing or adapters needed

Materials and Construction

Can-Am electrical parts use tinned copper conductors, sealed connectors, heat- and abrasion-resistant insulation and loom, and sealed housings for modules and sensors exposed to water and vibration.

Common Reasons Riders Replace This Part

• Fixing no-start, no-charge or intermittent faults
• Replacing harness sections damaged by rodents, heat or abrasion
• Replacing failed switches, relays, sensors or modules
• Restoring gauge functions and warning lights

Signs Your Positive Battery Cable Needs Replacing

• No-start, clicking or intermittent power loss
• Check engine or warning lights
• Battery not charging
• Melted, corroded or broken connectors and wires
• Switches, gauges or accessories that do not work

Installation Tips

1. Disconnect the negative battery cable first.
2. Use the Can-Am parts and wiring diagrams to confirm routing and connectors.
3. Clean corroded connectors with contact cleaner.
4. Make sure every connector clicks fully and seals.
5. Route wiring away from heat and moving parts, then test.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Can-Am Parts Diagrams for Your Machine

Find part #710004878 and every part installed with it in the factory Can-Am parts diagrams for your model:

• 2018 Can-Am Maverick parts diagrams

Related OEM Parts for the Same Machines

Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:

• Can-Am Battery Support (#710003129)
• Can-Am Angle Rotation Sensor (#420266168)
• Can-Am Electronic Key, Black (#710000817)
• Can-Am Dash Cap (#707900369)
• Can-Am Battery Cover (#707900163)
• Can-Am Battery Holder (#710001916)

Recommended Accessories and Maintenance Supplies

Pair your Positive Battery Cable with these parts and supplies:

• Wiring harnesses and connectors — Harnesses and pigtails
• UTV batteries — Replacement batteries
• Fuses, relays and connectors — Fuses, relays and terminals
• Battery tenders and chargers — Keep your battery charged
• Can-Am OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Signs of a Bad UTV Ground Strap & Battery Cable Fixes
• Is Your UTV/ATV ECM Failing? Symptoms & Fixes
• How to Tell If Your UTV or ATV Stator Is Bad
• Can-Am OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this Can-Am Positive Battery Cable?

The genuine Can-Am part number is 710004878. Use it to match this part to your factory parts diagram.

Which Can-Am models does part #710004878 fit?

It fits the Maverick (2017–2018); Maverick 1000R (2016); Maverick MAX 1000R (2016).

Is this a genuine Can-Am part?

Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.

Will this part need programming?

Most plug-in parts do not. Some modules and DESS keys need dealer programming. Check your service manual or contact us before ordering.

How do I find an electrical problem before buying parts?

Start with the battery, grounds and fuses. Many faults are a loose ground or corroded connector.

Should I use dielectric grease?

A light coat on connector seals helps keep water out. Follow your service manual.

Order Your Genuine Can-Am Positive Battery Cable Today

Ride with confidence on parts built for your machine. Order the genuine Can-Am Positive Battery Cable, OEM part #710004878, from Witchdoctors today and keep your Maverick or Maverick 1000R running the way BRP designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Can-Am OEM parts

Where to Ride Your Can-Am

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Stony Lonesome OHV Park — Bremen, Alabama: about 100 miles of trails
• St. Anthony Sand Dunes — St. Anthony, Idaho: 10,600 acres of dunes