Victory Radio Control Switch Black 1017807

Genuine Victory Radio Control Switch Black — OEM Part #1017807

Electrical gremlins can strand you far from home. The genuine Victory Radio Control Switch Black plugs into your Victory Cross Country or Cross Roads with the original connectors and ratings, so it works with the factory wiring, ECM and gauges.

Harnesses, switches, relays, sensors, the stator, regulator, starter, ECM, gauges and audio all work together. A wrong or weak part causes no-starts, warning lights or dead accessories. This part is confirmed for 3 Victory models from 2011 to 2016.

Radio Control Switch Black at a Glance

• OEM part number: 1017807
• Brand: Victory (genuine Polaris-made OEM part)
• Part type: Radio / Cruise Control Switch
• Victory fitment: Cross Country and Cross Roads, 2011–2016
• Condition: New

Models and Years This Radio Control Switch Black Fits

Genuine part #1017807 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Victory Motorcycle Fitment

Why Choose a Genuine Victory OEM Radio Control Switch Black?

• Plug-and-play fit with factory connectors
• Correct electrical ratings
• Weather-sealed for rain and washing
• Works with the factory ECM, gauges and diagnostics
• Sold by Witchdoctors, a Victory and Indian parts specialist since the Victory years

Features and Materials

Key Features

• Genuine Victory OEM electrical part, part #1017807
• Original connectors and pin-outs
• Water- and vibration-resistant construction
• Designed for the listed Victory models
• No splicing or adapters needed

Materials and Construction

Victory electrical parts use tinned copper wiring, sealed connectors, heat-resistant insulation and potted or sealed housings for modules, sensors and the charging system.

Common Reasons Riders Replace This Part

• Fixing no-start, no-charge or intermittent faults
• Replacing a failed stator or regulator
• Replacing switches, relays or sensors
• Restoring gauges, audio or accessories

Signs Your Radio Control Switch Black Needs Replacing

• Battery not charging or dying
• No-start or clicking
• Warning lights or gauge faults
• Melted or corroded connectors
• Switches or audio that do not work

Installation Tips

1. Disconnect the negative battery cable first.
2. Use the Victory parts and wiring diagrams for routing and connectors.
3. Clean corroded terminals and apply dielectric grease where specified.
4. Make sure every connector clicks and seals.
5. Route wiring away from heat and moving parts, then test.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Parts Diagrams for Your Bike

Find part #1017807 and every part installed with it in the factory parts diagrams for your model:

• 2016 Victory Cross Country parts diagrams
• 2016 Victory Cross Country Tour parts diagrams
• 2011 Victory Cross Roads parts diagrams

Related OEM Parts for the Same Bikes

Doing the job right? These genuine parts fit the same models and are often replaced at the same time:

• Victory Cheese Wedge Ignition Cover / Coil Cover Black (#5439044)
• Victory Circuit Breaker 40 Amp Marine Grade W/ Nuts (#WD-2410332)
• Victory Oil Pressure Switch (#4080746)
• Victory Circuit Breaker Boot Cover (#4010778)
• Victory Gauge Bezel Ring, Black (#5437068-070)
• Victory Battery (#4081963)

Recommended Accessories and Maintenance Supplies

Pair your Radio Control Switch Black with these parts and supplies:

• Stators and regulators — Charging system parts
• Battery tenders — Keep your battery charged
• Ignition parts — Ignition components
• Audio and speakers — Audio upgrades
• Victory OEM parts diagrams — find every factory part for your bike

Helpful Guides from the Witchdoctors Blog

• Expert Guide To Victory Motorcycle Wheel Speed Sensors
• Spring Tune-Up for Your Victory or Indian Motorcycle: Get Ready to Rid
• How to Store a Motorcycle for Winter: Essential Tips and Steps
• Victory OEM Parts vs Aftermarket Parts: Which Is Right?

Frequently Asked Questions

What is the OEM part number for this Victory Radio Control Switch Black?

The genuine part number is 1017807. Use it to match this part to your factory parts diagram.

Which Victory motorcycles does part #1017807 fit?

It fits the Victory Cross Country (2011–2016); Victory Cross Country Tour (2013–2016); Victory Cross Roads (2011).

Does part #1017807 fit Indian motorcycles?

Not according to the factory fitment data we have. If you ride an Indian, contact us with your VIN and we will find the right part.

Is this a genuine OEM part?

Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Victory models, not an aftermarket copy.

How do I know if my stator is bad?

Low charging voltage at the battery with the engine running is a common sign. Test before replacing.

Will this need programming?

Most plug-in parts do not. Some modules may need dealer setup.

Why does my battery keep dying?

Check the charging system, connections and any parasitic drain before replacing the battery.

Order Your Genuine Victory Radio Control Switch Black Today

Keep your Victory Cross Country or Cross Roads on the road. Add the genuine Victory Radio Control Switch Black (part #1017807) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Victory OEM parts

Where to Ride Your Victory

Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.

• Tunnel of Trees (M-119) — Harbor Springs, Michigan: a narrow, wooded Lake Michigan shoreline road
• Scenic Byway 12 — southern Utah: red-rock canyons and the Hogback ridge