Genuine Can-Am Rocker Arm Shaft — OEM Part #V14452CJF010
Rebuild with confidence. The genuine Can-Am Rocker Arm Shaft is the factory engine part for your DS 70 or DS 90, machined to BRP's original specification for proper clearances, sealing and long service life.
Engine internals and castings work under heat, pressure and constant vibration. A part that is even slightly off can cause oil leaks, low compression, noise or major engine damage. This part is confirmed for 6 Can-Am models from 2010 to 2022. See the full fitment list below.
Rocker Arm Shaft at a Glance
-
OEM part number: V14452CJF010
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Rocker Arms & Tappets
-
Fits: DS youth and sport ATV models, 2010–2022
-
Condition: New
Can-Am Models and Years This Rocker Arm Shaft Fits
Genuine Can-Am part #V14452CJF010 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am DS youth and sport ATV Fitment
| Model |
Model Years |
| Can-Am DS 70 |
2010–2013, 2017–2022 |
| Can-Am DS 70 Mini |
2014–2015 |
| Can-Am DS 90 |
2010–2013, 2016–2022 |
| Can-Am DS 90 Mini |
2014–2015 |
| Can-Am DS 90 X |
2010–2013, 2016–2022 |
| Can-Am DS 90 X Mini |
2014–2015 |
Why Choose a Genuine Can-Am OEM Rocker Arm Shaft?
- Factory tolerances for correct clearances and fit
- Designed to work with the other OEM parts in the engine
- Helps protect any applicable BRP warranty coverage
- Lowers the risk of a repeat teardown from a poor-fitting part
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM engine part, part #V14452CJF010
- Machined to BRP's original specifications
- Matches factory sealing surfaces and mounting points
- Made for the heat and loads of the listed engines
- Pairs with the gaskets and seals on the same parts diagram
Materials and Construction
engine parts use materials chosen for their location: aluminum alloy castings for cases, cylinders and covers; hardened, heat-treated steel for shafts, gears and valvetrain parts; and multi-layer or composite gaskets with elastomer oil seals.
Common Reasons Riders Replace This Part
- Full or partial engine rebuilds
- Repairs after overheating or oil starvation
- Fixing oil leaks at cases, covers and seals
- Restoring compression and power on a high-hour engine
Signs Your Rocker Arm Shaft Needs Replacing
- Oil leaks around covers, cases or seals
- Ticking, knocking or rattling from the engine
- Low compression or noticeable power loss
- Blue or white smoke, or high oil use
- Metal debris in the oil or on the drain plug magnet
Installation Tips
- Follow the BRP service manual for your model; engine work needs exact procedures and torque specs.
- Clean all mating surfaces and replace any gaskets and seals you disturb.
- Measure critical clearances with proper tools before final assembly.
- Lubricate moving parts with clean engine oil or assembly lube as specified.
- Torque fasteners in sequence, refill fluids and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #V14452CJF010 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Rocker Arm Shaft with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Rocker Arm Shaft?
The genuine Can-Am part number is V14452CJF010. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #V14452CJF010 fit?
It fits the DS 70 (2010–2013, 2017–2022); DS 70 Mini (2014–2015); DS 90 (2010–2013, 2016–2022); DS 90 Mini (2014–2015); DS 90 X (2010–2013, 2016–2022); DS 90 X Mini (2014–2015).
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Should I replace gaskets and seals at the same time?
Yes. Replace any gasket or seal you disturb. They are on the same Can-Am parts diagram.
Is OEM worth it over aftermarket engine parts?
For internals, OEM parts match the exact clearances the Rotax engine was designed around, which helps avoid noise, wear and leaks.
Can I do this repair myself?
Experienced home mechanics can do many engine repairs with the service manual and the right tools. Precision internal work is best left to a qualified technician if you are not set up for it.
Order Your Genuine Can-Am Rocker Arm Shaft Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Rocker Arm Shaft, OEM part #V14452CJF010, from Witchdoctors today and keep your DS 70 or DS 90 running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.