Badge

Seal Wire 710001332 by Can-Am

Price
$3.39 USD
Normally Ships in 8-12 Business Days

Inventory:

Loading..
SKU: 710001332
In stock and ready for shipping

SKU: 710001332

Genuine Can-Am Seal Wire — OEM Part #710001332

Electrical gremlins are some of the hardest problems to chase. The genuine Can-Am Seal Wire plugs into your Can-Am ATV or side-by-side with the original connectors, pin-outs and specifications, so it works with the factory wiring and electronics the first time.

Harnesses, switches, relays, sensors, charging parts and control modules all talk to each other. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 639 Can-Am models from 2011 to 2026. See the full fitment list below.

Seal Wire at a Glance

  • OEM part number: 710001332
  • Brand: Can-Am by BRP (genuine factory part)
  • Part type: OEM Harness
  • Fits: Commander crossover side-by-side, Defender utility side-by-side, Maverick sport side-by-side, Outlander ATV, Renegade sport ATV and Traxter utility side-by-side models, 2011–2026
  • Condition: New

Can-Am Models and Years This Seal Wire Fits

Genuine Can-Am part #710001332 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

This part is shared across 639 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.

Can-Am Commander crossover side-by-side Fitment

Model Family Model Years Trims
Can-Am Commander 700 2022–2026 8
Can-Am Commander 1000R 2022–2026 8

Can-Am Defender utility side-by-side Fitment

Model Family Model Years Trims
Can-Am Defender 2016–2017 2
Can-Am Defender 6x6 2020, 2022–2023, 2026 4
Can-Am Defender HD5 2017–2020 1
Can-Am Defender HD7 2022–2026 5
Can-Am Defender HD8 2018–2021 3
Can-Am Defender HD9 2022–2026 9
Can-Am Defender HD10 2018–2026 28
Can-Am Defender HD11 2026 11
Can-Am Defender Lone 2018 1
Can-Am Defender PRO 2020–2026 5
Can-Am Defender T 2017 1

Can-Am Maverick sport side-by-side Fitment

Model Family Model Years Trims
Can-Am Maverick R 2024–2026 12
Can-Am Maverick Sport 2019–2026 18
Can-Am Maverick Trail 2018, 2020, 2022–2023, 2025–2026 12
Can-Am Maverick Turbo 2019–2026 56
Can-Am Maverick X3 2017–2018 8

Can-Am Outlander ATV Fitment

Model Family Model Years Trims
Can-Am Outlander 2012 1
Can-Am Outlander 2x4 2025–2026 1
Can-Am Outlander 4x4 2018, 2025–2026 55
Can-Am Outlander 6x6 2014, 2019–2023, 2025–2026 30
Can-Am Outlander 450 2018–2025 17
Can-Am Outlander 500 2013–2015, 2023–2026 11
Can-Am Outlander 570 2016–2023 27
Can-Am Outlander 650 2013–2025 31
Can-Am Outlander 700 2023–2026 9
Can-Am Outlander 800R 2011–2015 12
Can-Am Outlander 850 2016–2026 37
Can-Am Outlander 1000 2013–2020 14
Can-Am Outlander 1000R 2016–2026 34
Can-Am Outlander DPS 2023 6
Can-Am Outlander EFI 2012, 2015, 2020–2024 16
Can-Am Outlander Ev 2026 2
Can-Am Outlander Intl 2021 1
Can-Am Outlander L 2015–2017 8
Can-Am Outlander PRO 2016–2018, 2023–2026 37
Can-Am Outlander X 2023 1
Can-Am Outlander XT 2012, 2023 3

Can-Am Renegade sport ATV Fitment

Model Family Model Years Trims
Can-Am Renegade 2016–2017 1
Can-Am Renegade 4x4 2018, 2025–2026 12
Can-Am Renegade 500 2013–2015 1
Can-Am Renegade 570 2018–2022 4
Can-Am Renegade 650 2020–2026 6
Can-Am Renegade 800R 2012–2015 4
Can-Am Renegade 850 2018–2022 4
Can-Am Renegade 1000 2012–2015 4
Can-Am Renegade 1000R 2018–2026 12
Can-Am Renegade EFI 2019–2023 2

Can-Am Traxter utility side-by-side Fitment

Model Family Model Years Trims
Can-Am Traxter 2017 1
Can-Am Traxter 6x6 2022–2026 1
Can-Am Traxter HD5 2017–2018 1
Can-Am Traxter HD7 2023–2026 4
Can-Am Traxter HD8 2016, 2018–2021 4
Can-Am Traxter HD9 2022–2026 6
Can-Am Traxter HD10 2018, 2020–2025 9
Can-Am Traxter HD11 2026 3
Can-Am Traxter PRO 2021–2026 4
Can-Am Traxter T 2017, 2020–2022 11

Why Choose a Genuine Can-Am OEM Seal Wire?

  • Plug-and-play fit with factory connectors
  • Correct electrical ratings for your machine
  • Weather-sealed for mud, water and pressure washing
  • Works with the factory ECM, gauge and diagnostics
  • Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support

Features and Materials

Key Features

  • Genuine Can-Am OEM electrical part, part #710001332
  • Original connectors, terminals and pin-outs
  • Water- and vibration-resistant construction
  • Designed for the listed Can-Am models
  • No splicing or adapters needed

Materials and Construction

Can-Am electrical parts use tinned copper conductors, sealed connectors, heat- and abrasion-resistant insulation and loom, and sealed housings for modules and sensors exposed to water and vibration.

Common Reasons Riders Replace This Part

  • Fixing no-start, no-charge or intermittent faults
  • Replacing harness sections damaged by rodents, heat or abrasion
  • Replacing failed switches, relays, sensors or modules
  • Restoring gauge functions and warning lights

Signs Your Seal Wire Needs Replacing

  • No-start, clicking or intermittent power loss
  • Check engine or warning lights
  • Battery not charging
  • Melted, corroded or broken connectors and wires
  • Switches, gauges or accessories that do not work

Installation Tips

  1. Disconnect the negative battery cable first.
  2. Use the Can-Am parts and wiring diagrams to confirm routing and connectors.
  3. Clean corroded connectors with contact cleaner.
  4. Make sure every connector clicks fully and seals.
  5. Route wiring away from heat and moving parts, then test.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Can-Am Parts Diagrams for Your Machine

Find part #710001332 and every part installed with it in the factory Can-Am parts diagrams for your model:

Related OEM Parts for the Same Machines

Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:

Recommended Accessories and Maintenance Supplies

Pair your Seal Wire with these parts and supplies:

Helpful Guides from the Witchdoctors Blog

Frequently Asked Questions

What is the OEM part number for this Can-Am Seal Wire?

The genuine Can-Am part number is 710001332. Use it to match this part to your factory parts diagram.

Which Can-Am models does part #710001332 fit?

It fits 639 Can-Am Commander, Defender, Maverick, Outlander, Renegade and Traxter models from 2011 to 2026. The complete list is in the fitment tables above.

Is this a genuine Can-Am part?

Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.

Will this part need programming?

Most plug-in parts do not. Some modules and DESS keys need dealer programming. Check your service manual or contact us before ordering.

How do I find an electrical problem before buying parts?

Start with the battery, grounds and fuses. Many faults are a loose ground or corroded connector.

Should I use dielectric grease?

A light coat on connector seals helps keep water out. Follow your service manual.

Order Your Genuine Can-Am Seal Wire Today

Get your Can-Am ATV or side-by-side back to factory condition. Add the genuine Can-Am Seal Wire (part #710001332) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

Where to Ride Your Can-Am

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

General Safety Warning & Installation Requirements

Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle, or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety of your vehicle.

Important:
Warning: Failure to follow manufacturer-specified installation procedures and safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.

Important Fitment Disclosure

At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.

Verification Required: While we strive for 100% accuracy, vehicle manufacturers often make mid-year production changes. Always verify your specific year, make, and model before finalizing your order.
Read More

Shipping

Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.

All orders over $500 will require a signature.

Please see International Shipping page for orders shipping outside the US.

See our full Shipping Policy page for further details.

Product Availability

We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.

Returns

If your order arrives and it is not right, we will we'll fix it. We promise!

Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Found URLs: